User manual for Climate sensor
Connect the sensor to Telldus Live
Requires a TellStick and a Telldus Live account
Note! If you have multiple sensors of this kind you must change the transmitting channel before you insert the batteries. Each sensor must transmit on its own channel. There are eight channels available and the sensor is preset to channel 1 and °C.Note! Do not immerse the unit into water. Only the temperature probe is waterproof.
Installation
Installation | |
Asennus | |
Installation |
- Unscrew the battery compartment lid.
- Choose a channel by using the switches inside the battery compartment (see picture 1.1).
- Insert the batteries. Make sure the polarity is correct.
- Screw the battery compartment lid back on.
- Place the cable probe inside the fridge/freezer and place the main unit within the TellStick’s receiving range (ca 20m).
- Follow the pictures 1.4-1.6 to connect the sensor to your Telldus Live! system.
Specifications
Article number | 313159 |
Battery | 2×1.5V AAA batteries |
Range | 0-20m |
Frequency | 433.92 MHz |
Temperature | -40– +50°C |
Temperature accuracy | +/-2°C |
Relative humidity | 20% – 95% |
Correct disposal of the products | |
Within the European Union, this symbol indicates that the products must not be disposed of in the household waste. Devices contain valuable recyclable materials that should be recycled for reuse and uncontrolled waste disposal may cause harm to the environment and human health. Please dispose of the old products via suitable collection systems or send the unit to the office where you bought it. This will make the product recycling. |
Proove AB Birger Svensson Väg 34 B,432 40 Varberg, Swedenwww.telldus.com • support.telldus.com
References
[xyz-ips snippet=”download-snippet”]