TELLUR TLL331281 Wi-Fi Smoke Sensor User Manual

Table of Contents

Wi-Fi Smoke SensorUser ManualTLL331281For other languages, please visit smart.tellur.com

INTO YOUR FUTURE

Thank you for choosing Tellur!To ensure optimum performance and safety, please read this user manual carefully before using the product. Keep this user manual safe for future references.WHAT’S IN THE BOXPlease consult this checklist for all parts.1 x Tellur Smoke sensor1 x CR123A battery1 x 3M tape2 x Screws2 x Tapping screws

PRODUCT OVERVIEW

Increase your sense of security with Tellur’s WiFi Smart Smoke Sensor.Having an intelligent double-checking algorithm, the device senses smoke and temperature changes and triggers the alarm.When it detects smoke, the sensor alerts you through an acoustic alarm, a light indicator and a push notiﬁcation is sent to your smartphone. You will also be notiﬁed on your smartphone when the batteries are running low or when someone tries to dismount the device.The WiFi Smart Smoke Sensor works with a CR123A DC 3V battery (included) and has a low energy consumption.The sensor integrates perfectly in the Smart Home ecosystem and allows you to check its working status and history records by simply accessing the Tellur Smart app from your smartphone.

PRODUCT FEATURES

Detects smoke & temperature change and triggers the alarm.Multiple types of alarms: light indicator, high-decibel acoustic alarm & push notiﬁcation.Low battery & tamper notiﬁcations.Compatible with Tellur Smart app, perfectly integrated in the Smart Home ecosystem.Works with a CR123A DC 3V battery (included) with low energy consumption.Working in 802.11 b/g/n 2.4GHz wireless network (no hub required).WiFi network conﬁguration with EZ (Smart Conﬁg) and AP (Access Point) mode.Share the device with your family.Mounting with adhesive tape or screw.

PRODUCT DIAGRAM

PRODUCT SPECIFICATIONS

Power supply: 1 x CR123A DC 3V (included)Battery life: Up to 3 yearsDetection range: Up to 50 m2Alarm level: 85dB @ 3 metersPush notiﬁcations: YesTamper notiﬁcations: YesLow battery notiﬁcations: YesHistory record: YesSelf test: YesWiFi standard: IEEE 802.11b/g/nSupported WiFi network: 2.4GHzColor: WhiteHousing material: PC + ABSInstallation method: Screws or 3M tapeOperating temperature: -10°C – +55°COperating humidity: 5% – 95% RHProduct dimensions: 70 x 70 x 29mmProduct weight: 88 gr

INSTALL APP AND REGISTER AN ACCOUNT

Download the Tellur Smart App for both iOS and Android OS.Scan the QR code to download Tellur Smart App

https://smartapp.tuya.com/tllsmart

Set up routerThis device only supports a 2.4GHz frequency band router, does not support 5GHz frequency band router, please set the relevant parameters of the router before WiFi conﬁguration, WiFi passwords do not include special characters such as #$%^&*(). When the device is conﬁgured in WiFi, the mobile phone and device are as close as to the router, which can speed up the conﬁguration of the device.

ADD AND REMOVE DEVICE IN YOUR APP ACCOUNT

6.1 Open the app and login, Click Add Devices > Security and Sensor > Smoke Detector (Wi-Fi) to start the device adding.

6.2 Press the device button for 5 seconds to enter the Wi-Fi conﬁguration state (fast blinking in EZ mode or slow blinking in AP mode).6.3 Input the Wi-Fi SSID and password of the Wi-Fi network that the device is going to work with, then waiting around 30 seconds for the Wi-Fi conﬁguration ﬁnished until a device is successfully added;6.4 Change the device name and share it within the APP account as you want.6.5 Click the device just added to launch the device state UI to check the state, battery level, record history and the APP notiﬁcation setting.

Note:*Make sure the device and APP work in the same Wi-Fi conﬁguration mode, both in EZ mode or in AP mode.*In some cases that the EZ mode is not working Wi-Fi network, AP mode is the only option.• EZ mode:make sure your APP is internet available and the device and APP both work in EZ mode. Then input the Wi-Fi network password to ﬁnish the device adding. If you want to change the Wi-Fi network, please check the “Change network” in APP;

• AP mode:Click AP Mode, make sure your APP is internet available, and the device and APP both work in AP mode. Conﬁrm to input the SSID and Password of Wi-Fi network, then select the Device AP name with Tellur Smart App in Wi-Fi list then back to App to ﬁnish the device adding.

After the device is successfully added to the APP account, the LED will turn off. Using the methods mentioned in the LED indicator to check the device is successfully added or not. If not, please repeat the Device adding again.

6.6 Remove device

Click “Remove Device” to remove this device from your account; click “Restore manufacturer Defaults” to remove the device from our account and clear the historical record in the cloud.
After removing the device or Restore manufacturer defaults from the APP, repeating the Device add steps to your account;

PRODUCT INSTALLATION

The product is only for indoor ceiling installation;
It is recommended to install this product in each corridor outside the room. If more rooms face different corridors, it is suggested to install the product in each corridor;
For the room or corridor that is longer than 12m, it is recommended to install a product at each end;
If your house has multiple ﬂoors, it is recommended to install it on every ﬂoor, including the loft and the basement.
Keep a distance of at least 50cm from the lamps or decorations;Keep at least 15cm away from the corner. The installation position should be 15~30cm from the corner as shown in ﬁgure 1;

If the ceiling is inclined, as the top is a “dead air” area, install the device on the top of the horizontal 90cm, as shown in ﬁgure 2

Do not install in the bathroom, or in places accessible to water or water droplets.
Do not install in an area with a temperature below -10ºC or above 55ºC.
Do not install in very ventilated areas, such as near air conditioners, ceiling fans, or fresh air vent.
Do not install in the place where burning particles are generated during combustion, such as the kitchen, near the stove or the exhaust gas from the garage.
Screw installation is recommended. The user is responsible for any accidents and safety incidents caused by poor installation.

Installation Method I (Screw installation)

Mark the center point of the two holes in the bracket at the selected installation place on the ceiling or wall, drill two holes in the mark with the drill bit and insert the tapping screw to make it ﬂush with the ceiling or wall.(Note: keep the sensor away from dust when drilling)
Use the two screws in the accessories kit to install the bracket in position.

As shown in the ﬁgure below, align the product body with the bracket at an angle by referring to the “Product installation alignment icon on the bracket. Rotate the product body clockwise until the product is securely ﬁxed into the bracket.

Product installation alignment icon side view

Product installation alignment icon front view

Installation Method II (3M tape installation)

As shown in the ﬁgure below, align the product body with the bracket at an angle by referring to the “Product installation alignment icon ” on the bracket. Rotate the product body clockwise until the product is securely ﬁxed into the bracket.

Product installation alignment icon side view

Product installation alignment icon back view

Use the 3M tape from the accessories kit, stick it on the back of the bracket and place the product in the desired position.

Alarm and self-test functionIn a normal working state, the LED will ﬂash RED every 1 minute. If smoke is detected, the RED LED ﬂashes quickly and a sound prompt will be activated.For a self-test press the Test/Mute button once. The sensor will make a prompt sound and the LED will ﬂash RED, GREEN and YELLOW, meaning the device is working properly. During self-test, the sensor will also send a notiﬁcation to the Tellur Smart app.! Important notes-The sensor will self-check for online status every 10 hours.-The sensor will send an audible, visual, and notiﬁcation on the app when smoke is detected.-Do not test the sensor with open ﬂame to avoid damaging the product.-If the alarm is sent during the test, it warns you of potential danger and needs immediate attention. Never ignore any alarm, it may lead to casualties or property damage.-If the sensor fails to self-test please refer to the “Troubleshooting” part of the manual. If the fault can not be ﬁxed, the product should be replaced immediately.Mute functionIn the eventuality of a non-ﬁre alarm caused by a known factor, such as cooking smoke, the sensor can be muted by one short pressing of the Test/Mute button. The mute period is 90 seconds, during which proper measures needs to be made (ventilate the area, remove the smoke).! Important notes-After 90 seconds of Mute function, the sensor will alarm again if the smoke concentration is still too high.-If you do not know the source of smoke, don’t ignore it. It can lead to casualties or property damage.

Fault modeIn case of fault alarm (such as the low battery, dismantling, sensor failure), press the Test/Mute button for 3 seconds then release. The sensor will be muted for 12 hours, during which you can replace the battery, re-mount the device, self-test the sensor.Press the Test/Mute button again for 3 seconds to re-activate the sensor to a normal working state.During the mute period, if another alarm occurs, the sensor alarm will be activated.Replace the batteryRemove the sensor, take out the battery and press the Test/Mute for 5 seconds to release the residual energy stored in the sensor. Insert the new battery and press Test/Mute button, this will make the device to self-test. If the self-test is ok, the sensor will switch to a normal working state.Daily maintenance-Test the sensor at least once a week.-Keep the sensor clean and without dust. You can clean it with a vacuum cleaner and a soft fabric material.-Do not use solvents or cleaning agents to clean the smoke sensor. It can cause damages to the sensor.-Don’t paint the sensor, it can affect the normal working of the product.

TROUBLESHOOTING

-If the sensor is not reacting, check if the sensor is properly installed on the bracket.-Check if the battery has sufﬁcient energy and replace it whenever necessary.-In case of an anti-dismantling alarm check if the sensor is properly installed on the bracket.

-Re-position the sensor if there are many false alarms (non-ﬁre alarms)-Try to clean the sensor if there are many false alarms.

WARNING

-Always use indicated battery type, do not replace it with another battery.-Proper dispose of the battery, do not incinerate, burn, dismantle the battery.-Do not leave the product in extremely high-temperature environment.-Do not disassemble the sensor, it will cause the warranty to be lost.-Keep out of reach of children, especially the battery.

Disposal and recycling informationThe crossed-out wheeled bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws. Proper collection and recycling of your equipment help ensure EEE waste is recycled in a manner that conserves valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be harmful for health and the environment.