TELTONIKA Networks RUT300 Industrial Ethernet Router User Guide

RUT300Quick Start Guide v1.2

Wiki knowledge basehttps://wiki.teltonika-networks.com/

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

I/O (PIN 3 and 4): Configurable digital Input/Output pins. Open collector output, max output 30 V, 300 mA, or Digital input where 0-6 V detected as a logic low and 8-30 V – logic high.

HARDWARE INSTALLATION

  1. Connect the power adapter to the socket on the back of the device. Then plug the other end of the power adapter into a power outlet.
  2. Connect to the device via an Ethernet cable connected to the LAN port.

LOGIN TO DEVICE

  1. To enter the router’s Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
  2. Use login information shown in image A when prompted for authentication.
  3. After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory and you will not be able to interact with the router’s WebUI before you change the password.
  4. When you change the router’s password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router’s main operating parameters.

TECHNICAL INFORMATION

Bundled accessories specifications*
 Power adapter Input: 0.4 VAC, Output: 9 VDC, 1 A, 4-pin plug

*Order code dependent.

SAFETY INFORMATION

RUT300 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.Hereby, TELTONIKA NETWORKS declares that this RUT300 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following Internet address: https://wiki.teltonika-networks.com/view/RUT300_CE/RED

This sign means that all used electronic and electric equipment should not be mixed with general household waste.This sign means that the product meets the requirements of the applicable EU directives.

www.teltonika-networks.com©2021 Teltonika Networks

References

[xyz-ips snippet=”download-snippet”]