TempMinder® MRI-284KH Instruction Manual
Thank you for the purchase of your new TempMinder®Fridge Thermometer with Probe. Please use the instructions below to setup this device.
Initial Setup
- Insert the included probe into the right side of the unit.
- Remove the battery cover.
- Move the battery (LR44) from the right slot to the left slot.
- Use the included pin to toggle between C° or F°.
- Place the monitor on the fridge/freezer using the rear magnet or use the rear bracket (optional).
Display MAX/MIN Temperature
- Press and release the MAX/MIN button to display the maximum temperature. Note the MAX on the display.
- Press and release the MAX/MIN button again to display the minimum temperature. Note the MIN is display.
- Press and release the MAX/MIN button to display the current. Note that neither MAX nor MIN are displayed.
Clear MIN/MAX Temperature
Use the MAX/MIN button to display either the MAX or MIN temperature. Press and hold the CLEAR button for 2 seconds to clear either the MAX or MIN temperature reading.
Freeze Alert
To enable Freeze Alert, press and hold the FREEZE ALT button for 5 seconds until you hear a beep and see the ❅ symbol on the top right if the display. To disable, press and hold the FREEZE ALT button for 5 seconds until you hear a beep and the ❅ symbol has disappeared from the display.
Specifications
Warranty: This product is guaranteed against manufacturing defects (not including batteries) for a period of one year. Should it fail, return it to the address below with a copy of your receipt.
TempMinder®3000 SE Waaler Street, Stuart, FL 34997 USA+1 (772) 463-6522 / [email protected] / www.MinderResearch.com©2019 Minder Division of Valterra Products, LLC.
References
[xyz-ips snippet=”download-snippet”]