TOUGHLIQUID 280 ARGB Sync
Parts List
Intel Installation Guide
AMD Installation Guide
Installation Guide
ARGB Controller Installation Guide
CAUTIONTo use the ARGB Controller, please only connect Cable E to the water block
- Light Mode:Switch over between 7 LED modes.Rainbow Full light RGB Spectrum Off Flow Radar Pulse Blink
- Color Mode:When light mode is in Full Lighted, Pulse and Blink:Switch over 8 LED colors .Red → Yellow → Green → Teal → Blue → White → Purple → RainbowWhen light mode is in Ripple:Switch over 7 LED colors .Red → Yellow → Green → Teal → Blue → White → PurpleWhen light mode is in RGB Spectrum:Click to memorize and lock the color you want, click again to unlock the 256 colors auto rotation.When light mode is in Wave and Flow:LED color can not be adjusted.
- Light Speed:Switch over between 4 light modes.Slow → Normal → Fast → Extreme
MB SYNC Installation Guide
CAUTION
- To use Motherboard RGB Software, please only connect Cable F to the water block
- Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to the mainboard. Connecting the wrong end can damage the product.
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.www.thermaltake.com
References
[xyz-ips snippet=”download-snippet”]