Timekettle M2 Translator Earbuds User Manual

Timekettle M2Translator EarbudsManual

Package

Bluetooth Pairing

Take out both M2 earbuds. One earbud will flash green every 0.5 seconds, and the other earbud will flash green every 5 seconds. Picture A （Quick flash / Slow flash） Turn on Bluetooth, choose “Timekettle M2” for pairing. （Picture B)

Reset The EarbudsPut the earbuds back to the Charging Case, and the earbuds will display solid red. Tap four times on both earbuds, and the earbuds will flash quickly in yellow, the earbuds are now resetting.

Translations

  1. When Bluetooth is connected, download the “Timekettle” app in the App Store / Google Play. You may also choose to scan the barcode to download. （Picture D） 
    www.wt2.co/timekettle

  2. Open the app and allow the permissions for the proper use of the device.（ Picture E ）
  3. Choose “M2” and connect the Bluetooth again within the app. The earbuds are connected when you hear the beep. You may choose one of the 3 different modes: Touch Mode, Lesson Mode, and Speaker Mode.（ Picture F ）

Controls

In Standby

App Status

Music Status

LED Indications (Earbuds)

LED Indications (Charging Case)

FAQ• No audio?

  1. Check the battery of the earbuds.
  2. Put the earbuds back to the Charging Case, and take them out again.
  3. Reset the earbuds, and reconnect to your mobile device.

• Can’t turn ON / OFF or charge the earbuds?

  1. Check the battery of the Charging Case.
  2. Connect the charging cable, and contact our Customer Service if it flashes normally.

• Can’t switch songs or activate voice assistants?

  1. Turn OFF, other third-party players.
  2. Use the default player or try other mobile devices.

• Bluetooth not stable or can’t find the device?

  1. Take the earbuds closer to the mobile device. Make sure there is no radio-frequency interference.
  2. Put the earbuds back to the Charging Case, and take them out again for pairing.
  3. Reset and repair the earbuds.

If you have any trouble with the device, please visit our officialwebsite: https://help.timekettle.co/en You may also contact us on social media likeFacebook/Twitter/Instagram @timekettletech

Safety

Please read the following safety and warning information before using M2 :

  1. Do not use unofficially recommended charging methods to avoid fire, explosion, or other dangers.
  2. Do not deliberately drop, burn, penetrate, squeeze, or immerse in liquid to avoid product damages.
  3. Do not expose to high temperatures or around heating equipment such as microwaves or ovens.
  4. Use the device within the range of 0℃ ~ 3 5℃ and store within the range of -20℃ ~ 45℃. If the temperature is too high or too low, it will cause the device to malfunction.
  5. Timekettle is not responsible for quality issues, product failures, and safety accidents caused by the use of unofficially approved accessories.*.Declearation of CE conformity: www.timekettle.co/support/statement

Corporate InformationOfficial Website: www.timekettle.coCustomer Service: [email protected]Manufacturer: this product is authorized for manufacturing by Shenzhen Timekettle Technologies Co., Ltd.Address: Room 602, Building 3, Minqi Science Park, Xili Road, Shenzhen, Guangdong Province, ChinaAll rights reserved by Shenzhen Timekettle Technologies Co., Ltd.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, , ,