TIMEXiConnect Kid SmartwatchesUser Guide
Important Safety Instructions And Warnings
- To prevent risk of fire, chemical burn, electrolyte leak, and/or injury from the unit’s internal Lithium-polymer battery:a. Do not attempt to remove the case back or exterior shell of the unit, or to remove its non-user-replaceable battery.b. Do not leave the unit exposed to a heat source or in a high-temperature location (such as in the sun or in an unattended vehicle). To prevent damage, store the unit out of direct sunlight.c. Do not puncture or incinerate the unit.d. When storing the unit for an extended time, keep it in the 32°F to 77°F (0°C to 25°C) temperature range.e. Charge the unit only within the 50°F to 113°F (10°C to 45°C) temperature range.f. Do not operate the unit outside the -14 to 104°F (-10°C to 40°C) temperature range.g. Contact your local waste disposal department to properly recycle or dispose of the unit or its battery.
- Use only the charging cable supplied with this product.
- This unit is not a medical device and is not recommended for use by persons with serious heart conditions. Always consult your physician before beginning or modifying an exercise program.
- Do not attempt to read the unit’s display while moving: this is unsafe and distracting, and could result in an accident or collision. Read the display only when you can safely do so. See instructions for details.
1. Product Specifications
- Model: M05A
- Memory: RAM 138KB+ ROM 512Mb
- Capacitive touch screen 1.3” 240*240 TFT Single Touch
- Bluetooth version 4.0
- Functions: Notifications, Heart Rate Monitor, Sleep, Activity, Basketball
- Battery Lithium-ion 3.7V/160mAh
2. Product Details
When using this device for the first time, please take out the device and charge it with the bundled charging cable. The device will automatically switch on while charging. The time and date of the device will be automatically synchronized with the phone once connection to the phone is established.
After pressing and holding the touch button, the device will start up and the screen shows the watch face as default.
3. Getting Connected
The iConnect By Timex 2 App
Download and install the iConnect By Timex 2 App from Apple APP Store or Google Play Store; iPhone with iOS 10.0 or higher and Android phone with Android 6.0 or higher is recommended.
Minimum requirement of the OS of mobile phone:
4. Main Screens
5. Watch Functions
6. Personal Data
After installing the APP, enter setting and click on the top profile to enter the personal data settings page. In order to estimate the calorie consumption more accurately, it is recommended to set the personal information in the App as accurate as possible.
7. Pair Watch
- Turn on Bluetooth of the phone.
- Open the sidebar-> click “Pair my watch” and then choose your device. The app will start to scan device -> Click “Pair” to connect your device -> Wait until connected.
- For iPhone environment, there will be a dialog “Bluetooth require to pair” showing up during binding. Please click “Pair”to proceed.
There will be “Connected” and icon 
shown on the right of the Bluetooth name of the watch in the Bluetooth Setting of the iPhone after connected successfully.
For iPhone, if it is required to connect the watch to another phone, please unpair the watch with the App first. After that, enter the Bluetooth settings of the iPhone, Then tap on the icon shown at the right side of the Bluetooth name of the watch and forget the device to ensure the watch is completed disconnected from the iPhone before attempting connection with the other phone.
8. Synchronous Data
The watch automatically synchronizes the data after pairing/connecting with the phone. Data includes steps, calories, distance, date and time, heart rate and sports. Or you can manually synchronize data by clicking the floating button. 8
Notice: Please don’t shut the Bluetooth notifying service when you are clearing software by background or close background application software. It will affect the sync function between watch and phone if shut it.
It is recommended to check whether the permission of “Location” of the phone to the iConnect by Timex 2 App is granted before attempting to pair the watch to the phone.
9. Step History
Tap on the block “Today’s steps” or “Activity data” will enter the “Step History” page. User is allowed to adjust the goal of step by tapping on the “set up” located at the top right corner. The step count recorded per day and the accumulated step count will be shown under Step History.
10. Sleep Monitor
You need to wear the watch at night, and the watch will monitor your entire sleep schedule and analyze the quality of your sleep according to your nocturnal movements.
11. Heart Rate
Routine: The watch will automatically monitor the heart rate for half an hour and the measured heart rate will be synced to the App automatically. The measured value will be shown on the Heart Rate block in the Dashboard of the App.
Detailed: On the APP, you can initiate real-time measurement of heart rate, which shows the trajectory map. Click Start to start monitoring heart rate and click Close to end monitoring.
Note: The HR measurement triggered by watch will NOT sync with App. Also the HR reading shown on the dashboard page is just a record of the HR measured automatically in interval of 30 minutes, which is shown on the “Routine” page of the HR in the App. Only the HR measurement triggered by “Detailed” page of HR in the App will sync with App”.
12. Add Friends
Add friends to compete on daily activity with each other.Enter the “My Friend” in the Navigation menu. Tap on the “add friend” icon at the top right corner to enter “Add friend” page. Type the email address of desired friend and search. The users with the name searched will be listed. Tap on the “Add friend” button to add the friend.
13. Leaderboard
Shows the ranking among added friends by daily activity.
14. Units
Set the unit of parameters shown on the watch and App to be Imperial or Metric.
15. Temperature
Set the temperature shown on the watch and App to be Celsius or Fahrenheit.
16. Find Watch
Find the watch paired with the phone. The paired watch will vibrate when tapping on the “Find Watch” on the App.
17. Firmware upgrade
Perform firmware upgrade on the watch through the App if there is new version of watch firmware available. Please ensure the App staying on the front during firmware upgrade. DO NOT attempt to close the App once the firmware upgrade is started or the watch will no longer be workable anymore.It is NOT recommended to upgrade watch firmware if the watch function is normal.
18. Motion Record
Tap on the Motion Record icon at the top right corner on the dashboard page. Then, tap on the “Start” button to enter the workout page. There are several workout choices, Walking, Running, Biking, Hiking, Run Indoor, Trial Run, available in Motion Record. Choose a desired workout mode, let say “Biking”.
Once setting is completed, tap on “Start” to start he workout. User can tap on the map icon at the top right corner to check the real-time location tracking.
Press the “Pause” icon to pause the workout. Then press and hold the “Stop” button for several seconds to end the workout.
There will be a record of the workout stored on the Motion Record page. User can always check the workout details by taping on the record.
The Motion Record support sharing the workout record to Strava, Google fit, Apple health and also support sharing to third-party app by image.
19. Calling and message reminder
19. Calling and message reminderAfter connecting the watch to the mobile phone, enter the notification page to open the incoming call and message reception, and the watch will receive the message、 phone call, message of Facebook and other third parties.
20. Schedule Setting
After connecting the watch to the phone, go to the Schedule setting and set the date and time of the schedule. Alert will be shown on the watch when the scheduled date and time is reached.
21. Sedentary reminder
After connecting the watch to the phone, go to the notification page and turn on the sedentary reminder. Set the start time and end time of sedentary reminder. If user is not active for 1 hour, device will vibrate to remind.
22. Drinking reminder
After connecting the phone, enter the notification page to turn on the drinking reminder switch to set the start time to remind drinking.
23. Alarm Setting
After connecting to the phone, enter the sidebar->click device->click alarm setting， add the new alarm; The watch will vibrate when the preset alarm time is reached. The alarm clock can be set daily or the day of a week, and you can create up to 5 alarm clocks.
24. Remote Camera control
After connecting to the phone, enter the navigation-> device->Camera. Turn on the phone camera and tap on the touch button of the device to take the photo.
25. Do not disturb mode
Allow disabling the notification and vibration on the watch.Go to “Do not disturb” mode and set the desired period of the time. Enable the “Do not disturb” mode by switching on the button.
26. Turn wrist to wake
Allow waking up screen by turning wrist action.
27. Time display
Set the time display format to 12 hour or 24 hour.
28. Reset
Reset the watch to factory default. Please note that all the data on the watch will be cleared once being reset.
29. Unpair
Unpair the watch from the phone. Just simply choose “OK” to confirm unpairing when pop-up appears.
IP68 Water Resistance
The watch is rated IP68 for dust and water resistance. The watch is resistant to submersion in fresh water up to a maximum depth of 1.5 meters for up to 30 minutes. Care should be taken to avoid over exposure to moisture and excessive submersion in water.
Other Safety and Precaution Notices
Bluetooth® Wireless TechnologyBluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility.
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points.Battery and Charger InfoYour device has an internal, non-removable, rechargeable battery. Do not attempt to open the back cover or remove the battery, as you may damage the device. To replace the battery, take the device to the nearest authorized service facility.
Aircraft, Hospitals
CAUTION: The device’s Bluetooth radio must be switched to OFF in airplanes, hospitals or other public locations where handheld wireless and other electronic devices are prohibited.
Medical Devices
Operation of radio transmitting equipment, including wireless phones, may interfere with the function of inadequately shielded medical devices. Consult a physician or the medical device’s manufacturer to determine if it is adequately shielded from external radio energy.
To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 6 inches (15.3 centimeters) between a wireless device and the medical device. Persons who have such devices should:
- Always keep the wireless device more than 6 inches (15.3 centimeters) from the medical device.
- Not carry the wireless device in a breast pocket.
- Turn the wireless device off if there is any reason to suspect that interference is taking place.
- Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.
Timex International Warranty
www.timex.com/Warranty or www.timex.ca/Warranty
FCC Notice (U.S.) / IC Notice (Canada)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
This Class [B] digital apparatus complies with Canadian ICES-003.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of ConformityManufacturers Name: Timex Group USA, Inc.Manufacturers Address: 555 Christian RoadMiddlebury, CT 06762United States of Americadeclares that the product:Product Name: iConnect Kids Active By Timex®Model Numbers: M05Ais in conformity with the relevant EU harmonized legislations. This declaration is issued under the sole responsibility of the manufacturer and conforms to the following:Radio Equipment Directive (RED): 2014/53/EUStandards:EN 62479EN 55032EN 55035ETSI EN 301 489-1ETSI EN 301 489-17ETSI EN 301 328Low Voltage Directive (LVD): 2014/35/EUStandards:IEC 60950-1CENELEC EN 60950-1Electromagnetic Compatibility (EMC) – Radio Frequency (RF)StandardsFCC 47CFR 15C Part 15 Subpart C 15.247IC RSS 247 Issue 2IC RSS GEN Issue 5
©2019 Timex Group USA, Inc. TIMEX and ICONNECT are trademarks of Timex Group USA, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Timex is under license. IOS is a trademark or registered trademark of Cisco in the US and other countries and is used under license. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
References
[xyz-ips snippet=”download-snippet”]