TIMEX T200 Silicone Strap Watch User Guide

Table of Contents

TIMEX T200 Silicone Strap Watch

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P…O… Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FUNCTIONS

Real-time calendar clock, Second time zone, Countdown timer, Daily/ weekday/weekend alarm, Hourly chime, 200 Lap Chronograph, Interval Timer,Review, INDIGLO® night-light with Night-Mode® Feature.

BASIC OPERATION

When setting, each button has a different function as indicated above. Watch face will indicate when button changes function.

TIME/DATE/HOURLY CHIME

In TIME mode, press and hold SET/RECALL. Time zone will flash.
To set, push + or – to select first or second time zone.
Press NEXT. Hour digits flash.
Press + or – to change hour including AM/PM. (Scroll through 12 hours to get to AM/PM).
Press NEXT. Minute digits flash.
Press + or – to change minutes.
Press NEXT. Second digits flash.
Press + or – to set seconds to zero.
Continue pattern to set month, day of month, year, 12-hour or 24-hour time display, MM. DD or DD. MM date format, turn hourly CHIME on/off, turn BEEP on/off… If you select BEEP on, a beep will sound every time you push a button (except INDIGLO®).
Press DONE to confirm and exit or NEXT to continue and set second time zone, if desired.
When in Time mode, press and hold START/LAP to “peek” at second time zone; hold for 4 seconds to switch time zones.

CHRONO

Press MODE until CHRONO appears.
Press and hold SET/RECALL.
The Display will read: FORMAT/SET, then select LAP/SPL or SPL/LAP options.
Press + or – to select desired format,
Press DONE to confirm and exit,
To use chrono, press START/LAP, Chrono continues to run even if you exit the mode…
Press STOP/RESET to stop chronograph from running OR while chrono is running, press START/LAP to take a split, Lap and split times will then be displayed in the format you selected, The lap number will alternate with the last two digits of the bottom line.

NOTES:

Lap and split times will appear frozen for 10 seconds, Press MODE to release the display and see running chrono.

INTERVAL TIMER

Single simple Interval Timer with four segments: Warm Up, Interval 1, Interval 2, Cool Down.

To set:

Press MODE until INTTMR appears.
Press SET/RECALL, wait for WARMUP to flash.
Press NEXT. Hour digits flash. Press + or – to change hours.
Press NEXT. Minute digits flash. Press + or – to change minutes.
Press NEXT. Second digits flash. Press + or – to set seconds.
Press NEXT to proceed to INT 1. Then follow steps 3-5 to set.
Complete setup of INT2 & COOL using steps 3-5.
Press NEXT to confirm and exit.
Press START/LAP to start Interval Timer.

NOTES:

When first countdown is complete, Timer proceeds to the next non-zero interval that is set. INDIGLO® night-light flashes and beep sounds between each interval.
If you set both Timers in Interval Timer to repeat, Timer will countdown both intervals and then repeat entire sequence.
Press and hold STOP/RESET to reset Interval Timer.

TIMER

Press MODE repeatedly until TIMER appears.
Press SET/RECALL. Hour digits flash.
Follow same pattern as setting TIME and ALARM to set hours, minutes, seconds, and select between REPEAT/AT END (timer counts down and then repeats) or STOP/AT END (the timer counts down and then stops).
Press DONE to confirm and exit.
Press START/LAP to start TIMER. Timer will continue to run even if you exit Timer mod If REPEAT/END selected will flash… If STOP/END selected will flash.
An alarm melody will chime when the timer has reached zero or before it starts to count down again.
Press STOP/RESET to stop TIMER. Press again to reset to countdown time.

REVIEW

Press MODE until REVIEW displays.
Press START/LAP to select a workout to view, and then press SET to view the data for that workout.
Press + and – to scroll through the workout data…
Press SET to go back to the list of saved workouts…
Press MODE to exit.

NOTES:

Press and hold SET to clear workout memory.

ALARM

Setting the ALARM is similar to setting TIME.

Press MODE repeatedly until ALARM appears.
Press SET/RECALL to set alarm.
Hour digits flash. Press + or – to change hour.
Press NEXT. Minute digits flash, Press + or – to change minutes.
Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.
Press NEXT. Press + or – to select DAILY, WEEKDAYS OR WEEKENDS.
Press DONE to confirm and exit.
Press START/LAP or STOP/RESET to arm or disarm alarm, When disarmed, OFF will be displayed, When armed, the alarm clock icon will appear .
The INDIGLO® night-light and alarm icon flashes and an alert sounds when the alarm goes off… Press any button to silence… A back up alarm will sound after five minutes if you don’t press any buttons…

INDIGLO® NIGHT-LIGHT/NIGHT MODE® FEATURE

Press INDIGLO® button to activate night-light. Electroluminescent technology used in INDIGLO® night-light illuminates entire watch face at night and in low light conditions. While the night-light is on pressing any button keeps it on for three seconds.

Press and hold INDIGLO® button for 4 seconds to activate NIGHT MODE® feature. Moon icon will appear… Once activated, any button pushed will cause INDIGLO® night-light to stay on for 3 seconds. NIGHT-MODE® feature will stay activated for 8 hours or until deactivated by pressing and holding INDIGLO® button again for 4 seconds.

WATER RESISTANCE

If your watch is water-resistant, meter marking or () is indicated…

Water-Resistance Depth	p.s.i.a. * Water Pressure Below Surface
30m/98ft	60
50m/164ft	86
100m/328ft	160

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

Watch is water-resistant only as long as lens, push buttons and case remain intact.
Watch is not a diver watch and should not be used for diving.
Rinse watch with fresh water after exposure to salt water.

BATTERY

Timex strongly recommends that a retailer or jeweler replace battery. Battery type is on watch back. If present, push/short internal reset switch after replacing battery. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.