Tivoli Audio Model One BT Bluetooth AM/FM Radio User Guide

Table of Contents

MODEL ONE™ BTQuick Start Guide

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
WARNING – To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories speciﬁed by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the art/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Operate this product only from the type of power source indicated on the rear panel. For products using an external power supply, use an exact replacement if lost or damaged. For products operating from battery power, refer to the user manual.
Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel under the following conditions:a. When the power supply cord or plug is damagedb. If liquid has been spilled or objects have fallen into the product.c. If the product has been exposed to water or rain.d. If the product does not operate normally by following the operating instructions.e. If the product has been dropped or damaged in any way.f. When the product exhibits a distinct change in performance.
When replacement parts are required, be sure your service technician has used replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.
Upon completion of any service, ask the service technician to perform safety checks to conﬁrm the product is in proper operating condition.
Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.
The recommended operating temperature range is 5ºC to 40ºC (41ºF -104ºF).
The 12 VDC input is suited for operating this product in a boat or camper using an optional 12 VDC, 1 A fused adapter.
Keep this product a safe distance away from naked ﬂame, such as a lit candle.
WARNING – The mains are not disconnected in the off position, but the circuits are de-powered.
Canada complies with RSS210, ICES-003.
The power cord plug serves as the disconnect device and should remain readily accessible.

WARNING: THE AFFIXED MODEL ONE BT ANTENNA IS NOT INTENDED TO BE DETACHED.This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic devices. Find out more about return and collection points through your local authority. The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce the amount of waste going to landﬁlls, thereby reducing the environmental impact on the planet and on human health. Please act responsibly by recycling used products. If this product is still useable, consider giving it away or selling it.

Model One BT Instructions

Congratulations on your purchase of the Model One BT table radio. With the addition of Bluetooth wireless technology, you can stream your music wirelessly to the Model One BT. We know you are eager to use your new radio, but please take a moment to read this owner’s manual and Safety Instructions. If you have any questions, please do not hesitate to contact your dealer or Tivoli Audio.Please save the carton and original packing should you ever need to ship your radio, as shipping damage is not covered by the factory warranty.On behalf of all of us, thank you for choosing Tivoli Audio and enjoy your new Model One BT radio.Packed with your model one BT you Should find one each:

(1) External Power Supply and accompanying plugs
(1) FM Telescopic Antenna

Please contact your dealer or Tivoli Audio if any of these items are missing.

Guide to Features (Front)

VOLUME KNOB: Rotate the volume knob to the right to increase the volume or to the left to decrease the volume. This knob also controls the volume of the headphone output.
OFF/FM/AM/AUX KNOB: Turn the knob one click to the right to hear the FM band, two clicks to the right to hear the AM band or three clicks to the right to select the auxiliary input. To activate Bluetooth, switch to the Auxiliary position and follow the steps outlined in the “Bluetooth Operation” section.
TUNING KNOB: Rotate the analog tuning dial to the right or to the left to adjust the FM (upper half of dial) or AM (lower half of dial) frequency range.
TUNING INDICATOR: Brightest when best tuning has been achieved. Some listenable AM stations will not light the tuning indicator and should be tuned by ear for the clearest signal. This light may or may not remain lit when in the AUX position depending upon the position of the AM dial.
POWER INDICATOR: Glows when the source knob is in any position other than Off.

Guide to Features (Rear Panel)

12VDC/1.5A: This input is for use with an optional 1.5A fused, 12VDC adapter, for operation in a boat or camper. The connector must be 5.5mm/2.1mm center positive.
FM ANTENNA SWITCH: Switch between internal and external FM antennas. This switch has no affect on AM reception. In some cases, FM reception may be improved by setting this antenna switch to External.
EXTERNAL FM CONNECTION: When listening to FM, depending on your country, slide the included wire antenna over this F connector, or adjust this telescoping antenna and position it for best reception. In strong FM signal locations, reducing the antenna’s length may provide better reception. When the unit is not in use or when listening to AM, keep the antenna retracted to protect it. This antenna has no affect on AM reception. For more, see the section marked “Reception”.
EXTERNAL AM CONNECTION: In some cases, AM reception may be improved by connecting an external AM antenna (not included) to this jack, which accepts a 3.5mm male stereo mini connector. For more, see the section marked Reception.
HEADPHONE OUT: Connect a headset (not included) to this variable stereo output for private listening. The headset will mute the primary speaker. The headset’s volume is adjusted using the volume knob. This stereo output accepts a 3.5mm stereo male mini connector. Avoid using headphones at high volume levels to prevent possible hearing damage.
AUX IN: To hear audio from another device, such as a CD player, MP3 player, or computer, connect said device’s audio output to this stereo input and switch the front source knob to Aux. Switching to the Aux position does not turn on the connected device. This stereo input accepts a 3.5mm stereo male mini connector. The left and the right stereo signal is summed to mono. The AUX IN jack is unavailable when a Bluetooth device is connected. You must ﬁrst disconnect any Bluetooth device to use the wired AUX IN function.
NOTE: You may need to adjust the volume level differently for an auxiliary device than the level used for radio listening.
REC OUT: You can record from the Model One BT radio by connecting a cassette deck’s audio input (or another recording device) to this ﬁxed level stereo output. You can also use the Model One

BT radio as a high-performance analog tuner by connecting it to the audio input of a preampliﬁer or integrated ampliﬁer. The primary speaker will not be muted when using this output. This jack accepts a 3.5mm stereo male mini connector.

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 5.0 and your device is not connected to any other Bluetooth product. Devices may pair differently. Below is a general guide.

Turn on the Model One BT to the Auxiliary position. This will power on Bluetooth. Turn the volume up about ¼ to start. Also, turn up the volume on the source device (the device you are streaming from).
Turn on the Bluetooth wireless technology on your enabled device.
Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate searching.Some devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to “Connected”.
You will hear a ring tone from the Model One BT conﬁrming connection and you can begin playing your music ﬁles wirelessly. Adjust the volume level on your device. You should not have to pair your device again. Depending on your device, you may need to make multiple attempts at Pairing and/or Connecting to the Model One BT, but please give your device adequate time to Pair or Connect before repeating the process.

Placement

Place the unit on a ﬂat, stable surface. Do not block the bottom bass port. The Model One BT radio is not video shielded and should be kept at least 12.7 cm away from a computer monitor or television. The Model One BT radio can be positioned vertically as well as horizontally. Placement in a bookcase, cabinet, or close to walls or corners may inﬂate the bass.

Cleaning

Never use any harsh cleansers or solvents on your radio. Avoid spray-on waxes. Unplug the Model One BT radio prior to cleaning. The face may be cleaned with a slightly damp, soft cloth. Painting or staining the wood cabinet will void your warranty.NOTE: Tivoli Audio cabinets use real wood veneers. Since natural wood varies greatly, it is not possible to achieve an exact wood color/grain match between models. You may also notice the wood darken over time with exposure to sunlight. Again, this is normal for real wood.

Specifications

Model: Tivoli Audio® Model One® BTType: AM/FM mono table radio with Bluetooth wireless technologyDriver: One 76.2 mm (3″) full-range driverDimensions: 21.3 cm W x 11.4 cm H x 13.3 cm D (8.375″ W x 4.5″ H x 5.25″ D)Weight: 1.88 kg (4.14 lbs)

Speciﬁcations are subject to change without notice.Tivoli Audio reserves the right to make product changes without notice.Tivoli Audio, the Tivoli Audio logo, and Model One BT are trademarks of Tivoli Audio, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Tivoli Audio is under license. Other trademarks and trade names are those of their respective owners.

218 Newbury Street, 1s, Floor Boston, Massachusetts 02116T: 617.345.0066 F: 617.428.0088 tivoliaudio.com

EU Declaration of ConformityManufacturer’s Name: Tivoli Audio, Inc.Manufacturer’s Address: 218 Newbury Street, 1″ Floor Boston, MA02116 United States of AmericaDeclares under the sole responsibility that theProduct Name: Model One BT ProductModel Number: M1 BTThe product herewith complies with the essential requirements of the Radio Equipment Directive 2014/53/EU when installed and used in accordance with the manufacturer’s instructions.EN 300 328 V2.1.1EN 301 893 V2.1.1EN 301 489-1 V2.1.1EN 301 489-17 V3.1.1The Model 1 BT complies with the following directives:2011/65/EU RoHS, 2014/30/EU Electromagnetic Compatibility, 2014/35/EU Low-Voltage Devices

EMCEN 55032:2015(replace of EN 55013)EN 55020:2007/A11:2011 +Al2:2016EN 61000-3-2:2014EN 61000-3-3:2013Safety EN 60065: 2014Energy Efficiency Implementation Measure EC Regulation 1275/2008:2008-12-17Amended by (EC)278/2009:2009-04-06,(EC)642/2009:2009-07- 22, (EU)617/2013:2013-06-26;(EU)801/2013:2013-08-22 Stage 5 (1. Jan. 2019)Test Standard PPP 11005E:2013 EN 50564:2011Signed:

Name: Sam HerecPosition: Technical Product ManagerDate: April 12, 2019

Manufactured byTivoli Audio, Inc 218 Newbury St Boston, MA 02116European ImporterTivoli Audio, Cooperatief Mariaplaats 3 3511 LH Utrecht The Netherlandswww.tivoliaudio.com

report this ad

tivoliaudio @tivoliaudio