pump and GoPouch and Bottle WarmerINSTRUCTIONS FOR USEUS
Please read and retain this important information for future reference.Distributed by;Mayborn USA Inc., dba Mayborn Group1 Edgewater DriveSuite 109Norwood, MA 02062Copyright © Mayborn USA Inc. 2015TOMMEE TIPPEE is a registered trademark.Any questions?Visit our website www.tommeetippee.comModel Number: 1118Voltage: 120v~60Hz 500WLeaflet Number: 0522145
CAUTIONAlways use on a flat heat-resistant surface. When in use the unit contains hot water and steam. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. Always keep the unit and its plug out of reach of small children. Before plugging in the unit for the first time ensure the voltage is compatible with your electricity supply by checking the label on the base of the unit. The product has been fitted with a cord wind on the base of the unit to allow you to adjust the length of the cord safely. It is recommended that the cord be kept as short as possible. User maintenance other than cleaning or descaling is not required for this product. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord. Always place the bottle or pouch into the warmer before adding the water. Ensure water has been added to the unit before switching the unit on. When the milk or food has reached the desired temperature, remove immediately. If left in the warmer the temperature of the milk or food will continue to increase. Ensure that the heating guidelines are followed to ensure that the food is not heated for too long. For your child’s safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONSPlease ensure you read these instructions thoroughly and use the appliance in accordance with instructions strictly. Please note misuse may lead to injury. Do not touch hot surfaces, use handles, and knobs. To protect against fire, electric shock, and injury to persons do not immerse cord, plugs, or other parts of the unit in water or other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning. Allow cooling before putting on or taking off parts and before cleaning the appliance. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. If the supply cord is damaged, it must be changed by a qualified person in order to avoid a hazard. If the damage is from new, the unit must be returned to the manufacturer. If within a retail warranty period and proof of purchase retained; this product should be exchanged at place of purchase. The manufacturer will then be made aware. The use of an accessory attachment is not recommended by the appliance manufacturer as this may result in fire, electric shock, or injury to persons. Do not use the outdoors. Do not let cord hang over edge of table or counter or touch hot surfaces. To disconnect turn any control ‘off” then remove theplug from the wall outlet. Do not use appliance for anything other than intended use.
SAVE THESE INSTRUCTIONSBefore serving, unplug cord from wall outlet and always be sure food is at safe temperature before feeding. Do not leave cord within child’s reach. Do not leave cord within child’s reach. A short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If a longer detachable power supply cord or extension cord is used: The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, and The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord.
TO ENSURE CONTINUED PROTECTION AGAINST RISK OF ELECTRIC SHOCK, CONNECT TO PROPERLY GROUNDED OUTLETS ONLY
1. SETUP Please refer to the instructions leaflet before use and remember to clean and descale your unit regularly
2. USAGEFor your child’s safety always check food temperature before feeding by testing on a sensitive part of the skin
3. CLEANING & DESCALING
The descaling process will remove deposits of calcium and other minerals in the system that may affect its performance
CLEANINGAfter each use, unplug and allow to cool before cleaning. Pour away any excess water and wipe with a damp cloth only. Do not clean with abrasive cleaners or allow to come in to contact with solvents or harsh chemicals, damage could result.DESCALINGWe recommend carrying out the descaling process approximately every 4-weeks. If you notice limescale earlier than 4-weeks, descaling may be required sooner. Living in a hard water area can produce limescale quicker than other areas. You can find out your water quality via your water provider. You may need to repeat either process if you find that limescale is still present. Alternatively, you may wish to use a specific descaling solution suitable for electric warmers if your build up is significant, you may need to use a stronger solution.
There are two methods of descaling that you can follow for your warmer.Option 1:1. Empty the electric warmer and wipe down the inside with a clean sponge or damp cloth.2. Pour in 1 cup of white vinegar.3. Leave for at least 30 minutes, or up to 24-hours depending on the extent of the limescale.4. Pour any remaining liquid down the sink. Rinse the interior of the warmer well with cool water and use a clean sponge or damp cloth to remove any build-up that came loose as a result of the descaling/cleaning process.5. Plug unit back in and add regular amounts of water you use for normal warming. Turn on and run for 5 minutes to remove any additional build-up. Upon completion, rinse warmer again and use as directed.Option 2:1. Empty the electric warmer and wipe down the inside with a clean sponge or damp cloth.2. Pour in 1 cup of white vinegar.3. Turn on the warmer and run for a cycle, approximately 5-minutes.4. Unplug the unit and leave to cool, then pour any remaining liquid down the sink. Rinse the interior of the warmer well, with cold water and use a clean or damp cloth to remove any build-up that came loose as a result of the descaling/cleaning process.5. Plug unit back in and add regular amounts of water you use for normal warming. Turn on and run for 5 minutes to remove any additional build-up. Upon completion, rinse warmer again and use as directed.
Tommee Tippee #0522145 pump and GO Pouch and Bottle Warmer Instruction Manual – Tommee Tippee #0522145 pump and GO Pouch and Bottle Warmer Instruction Manual –
[xyz-ips snippet=”download-snippet”]