light and sound sleep aid
Mayborn ANZ Pty Ltd. (ABN 66 154 703 134)Mayborn Group is a business name of Mayborn ANZ Pty Ltd.
Thanks for choosing this Tommee Tippee light and sound sleep aid.
Ollie the Owl, Bennie the Bear and Pip the Panda are part of the Tommee Tippee grofriends collection designed to help you and your baby enjoy safe and fun bedtime adventures.Your cuddly companion will help you and your baby get a good night’s sleep. With a soft light, soothing sounds and gentle lullabies your little one will be reassured as they go to sleep. During the night, the intelligent CrySensor listens out for any crying noises and plays your chosen sound or lullaby to help them drift back to sleep.From cosy sleeping bags and room temperature thermometers to friendly night lights, we’re here to help ensure your baby enjoys safer, longer sleep and sweet dreams. Because when they have a good night’s sleep, everyone else does too.
tommee tippeehelping you Parent Ontommeetippee.com
WARNINGS!
IMPORTANT WARNINGS: Please keep instruction guide for future reference as it includes important information. You can also find these instructions at tommeetippee.com. Your child’s safety is always your responsibility. Check all parts of the product before using it. If you notice any deficiency immediately stop using it and contact tommeetippee.com.Soft toys are not to be left inside baby’s cot.Ensure the product is hung outside of the cot when in use with fabric loop so it is out of reach of the child. Attach this toy out of the reach of the child. To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on hands and knees in a crawling position.Do not use any accessories other than those supplied with this appliance.Use with a 5V 1A or 5V 2A plug adapter. Only plugs that are approved to BS1363 should be used (UK only).This product is intended for use only via charging through a correct USB lead. Do not plug the USB directly into a mains power supply.This toy contains batteries that are non-replaceable.This product comes with 1 lithium ion rechargeable battery. Rechargeable batteries are only to be used under adult supervision and keep product out of child’s reach when the product is charging. Rechargeable battery is for adult use only. Keep the USB cable away from children. The battery box must be pulled out of the plush toy during charging, do not charge whilst still inside the plush toy – Rechargeable batteries are to be removed from the toy before being charged.WARNING For the purposes of recharging the battery, only use the detachable unit provided with this toy. Caution ensure cable isn’t twisted or caught behind furniture as this can cause weakness in the cable. Ensure the product is examined for damage to the cord, enclosure, and in the event of such damage, do not use. Do not operate any appliance with a damaged USB lead. If the appliance malfunctions or has been damaged please contact tommeetippee.com.If damaged within retail warranty period, this product should be exchanged at place of purchase.The manufacturer will then be made aware.Misuse of the product may result in the risk of fire, electric shock and/ or personal injury.Caution do not submerge in water.This toy is only to be connected to Class II equipment bearing the following symbol.
Technical InformationCurrent Amps :20 mA-80mACurrent in mAh: 2500Voltage : 3.7VWatts: 0.3W
This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.Do not drop or cause any impact to the light and sound sleep aid.Do not use the light and sound sleep aid if any part of it is cracked or damaged.Do not attempt to remove, replace or repair the lithium-ion battery.Do not use damaged USB leads, adaptors or loose electrical sockets.Do not pull the USB lead excessively when disconnecting it.Do not bend or damage the USB lead.Do not use the light and sound sleep aid with wet hands.Do not expose the light and sound sleep aid to very cold or very hot temperatures.Ensure your light and sound sleep aid is turned off when not in use.Ensure any device containing batteries is disposed of in accordance with local laws.
INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
- This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
- For proper disposal for treatment, recovery, and recycling, please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
- Please contact your local authority for further details of your nearest collection point for WEEE.
- Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
Getting started
Important! Please read these instructions carefully before use and keep for future reference.
Charging your light and sound sleep aidTo charge, insert the mini USB connector of the power lead into the charging port on the battery pack and the USB connector into any standard USB charger (120-240V).DO NOT connect a USB lead to a standard plug socket.The indicator light on the battery pack will glow red whilst charging. When the indicator light glows blue, it is fully charged. The indicator light goes off when not connected to a power source.Make sure its fully charged before first use. It will take approx. 5 hours to fully charge the battery.When it is fully charged, the battery should last approx. 25 hours on the highest energy use and 75 hours on lowest energy level.When charging, pull the battery box out of the back opening. It will remain attached but not touching the plush material.Only adults should charge your light and sound sleep aid.Only plugs that are approved to BS1363 should be used (UK only).Note: Your light and sound aid will not work while the battery is charging.
How to use
Your light and sound sleep aid has 4 limbs that you use to control lullabies, sounds, volume and light.
About the CrySensor
The CrySensor allows your light and sound sleep aid to listen out for noise and respond by playing the sound or lullaby you last chose to help settle your child back to sleep. Your light and sound sleep aid can hear all the noises in a room but is programmed to respond to crying or sharp sounds that may disturb your little one’s sleep. If there’s a rapid movement in the room, the noise may be enough to activate it.Place your light and sound sleep aid near your child, but never in the cot or other sleeping space with them.
How to turn the CrySensor on and offSelect how you want to use the CrySensor using the function switch on the battery pack.
If your child is having a difficult night, it may continuously play the soothing sound from one 20-minute playtime to the next until your little one is settled.
FAQs
Q: What age can the light and sound sleep aid be used from?They are suitable from birth to soothe a newborn and can be used with your child as they grow. Having buttons in arms and feet make it perfect for a toddler to work themselves.Q: How do I check that the CrySensor is working?To check the CrySensor, make sure you have the function switch in the correct position then clap next to it to hear your chosen sound or lullaby.Q: Where should I put the light and sound sleep aid?You should place it near your baby so it can listen in CrySensor mode and so your baby can hear and see them. Use the loop to attach it to your baby’s cot out of reach of your baby or stand it on nearby furniture. If you use the loop to attach to the cot, make sure it is hanging outside the cot so that if it falls, it will fall outside the cot.Never place a toy or other object on the mattress inside a sleeping baby’s cot.Q: What sounds can my light and sound sleep aid hear?The CrySensor works best when it is less than 1 metre from your child. When noise levels within 1 metre reach 50dBA, it will play your chosen sound.Q: How do I care for my light and sound sleep aid?Because of the electrical components inside, this product is surface wash only. Please do not put it in a washing machine or tumble dryer. Just wipe it over with a damp cloth. Do not use any chemicals as they may affect fabrics or transfer to your child’s environment.Q: What if my light and sound sleep aid does not play sound or light up?First check the switch on the battery pack to make sure it is turned on. If it still doesn’t work, check it is fully charged by plugging into the charging cable (Note: Your light and sound aid will not work while the battery is charging). The indicator light on the battery pack will glow red for charging and blue for fully charged. If you’re still having problems, please contact us (tommeetippee.com).
Safe sleep AdvicePlace you baby on their back to sleep, in a cot in the same room as you, for the first 6 months. Never sleep with your baby on a sofa or armchair.Make sure your baby is warm, but not too hot. The safest room temperature for your baby is between 16°C and 20°C (62 to 68°F). Use a room thermometer and touch your baby regularly to check.Alter the room temperature or add or remove layers of bedding and clothing as required. Pay special attention to the room temperature if your baby is unwell.To help keep your baby at a safe and comfortable temperature when sleeping, you should only use bedding such as a baby sleep bag. Don’t allow your babies head to be covered.Do not use sheets, blankets, quilts, duvets, pillows or other covers until they’re 12 months old.These can cause your baby to overheat.Always keep your baby in a well-ventilated and smoke free environment.For further information visit tommeetippee.com
Register your light and sound sleep aid
Why register?
- Get an additional year’s warranty completely free of charge.
- Get support more quickly as we’ll already have information about you.
- You’ll be the first to hear about any product information updates.Visit tommeetippee.com/product-registration to register. It’s quick and easy.
Tommee Tippee Light and Sound Sleep Aid User Manual – Tommee Tippee Light and Sound Sleep Aid User Manual –
[xyz-ips snippet=”download-snippet”]