penguin 2-in-1 portable night light
WARNINGS!
IMPORTANT: Please keep instruction guide for future reference as it includes important information.You can also find these instructions at tommeetippee.com. Your child’s safety is always your responsibility. Check all parts of the product before using it. If you notice any deficiency immediately stop using it and contact tommeetippee.com.Keep out of reach of children under 18 months old.Use with 5V-1A plug adapter. Only plugs that are approved to BS1363 should be used (UK only).Product is only to be connected to Class II equipment bearing the following symbol.
This product is intended for use only via charging through a correct USB lead.This product comes with 1 lithium-ion rechargeable battery.Caution: Ensure the cable isn’t twisted or caught behind furniture as this can cause weakness in the cable.Ensure the product is examined for damage to the cord, enclosure, and in the event of such damage, do not use.Caution: do not submerge in water. Your Penguin Night Light is an electrical product so should not be washed with water. If you need to give him a clean, wipe with a lint-free cloth.Keep out of reach of children under 18 months old and when the product is charging.Warning. Long Cable. Strangulation hazard.This product contains batteries that are non-replaceable.WARNING For the purposes of recharging the battery, only use the detachable unit provided with this toy.Do not drop or cause any impact to the Penguin Night Light.Do not use the Penguin Night Light if any part of it is cracked or damaged.Do not attempt to remove, replace or repair the lithium-ion battery.Do not use damaged USB leads, adapters, or loose electrical sockets.Do not pull the USB lead excessively when disconnecting it.Do not bend or damage the USB lead.Do not use the Penguin Night Light with wet hands.Do not expose the Penguin Night Light to very cold or very hot temperatures.Ensure the Penguin Night Light is turned off when not in use.Ensure any device containing batteries is disposed of in accordance with local laws.Place your Penguin Night Light on a piece of furniture in your child’s bedroom so thatthe cable is out of reach of your child and does not create a trip hazard. Never place your Penguin Night Light on the floor.The product shall be supplied with a general certified independent SELV power supply (suchas. use as attachment to a TV, IT equipment ETC. – similar like a computer mouse) and– With constant output voltage equal to rated voltage of this product; and– With output power at least equal to rated power of this product.The light source of this luminaire (Penguin and portable light) is not replaceable, when the light source reached its end of life the whole luminaire shall be replaced.
FCC Requirement (Product being sold in the USA).This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Caution: Changes or modifications not expressly approved by gro-group could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
Technical InformationCurrent Amps: Penguin Night Light 0.55ACurrent in mAh: 520Voltage: Penguin Night Light 5V, Portable Night Light 3.7VWatts: Penguin Night Light 2.8W
Environmental protectionWaste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Getting started
a. To switch on your Penguin Night Light insert the micro USB end into the back of the Penguin and the USB end into any standard USB charger (120-240V). DO NOT connect a USB lead to a standard plug socket.b. The Penguin will now work as a fixed nursery Night Light and as a charging dock for the portable light.The portable light will automatically charge when it is docked on the Penguin’s base and the Penguin is plugged in, unless the portable light is already fully charged. Note: the portable light will not light up when it is docked on your Penguin.When the portable light is running out of battery, the low battery light will come on. If the portable light battery is completely empty, it will take approximately 8 hours to fully charge.The portable light will last for approximately 10 hours before it needs to be recharged.
Using your Penguin Night Light
Mayborn (UK) Limited,Balliol Business Park,Newcastle upon Tyne,NE12 8EW, UK
Mayborn USA Inc.1010 Washington Boulevard, 11th Floor,Stamford, CT 06901
Mayborn ANZ Pty Ltd.(ABN 66 154 703 134),PO Box 475 Mt Waverley VIC 3149,AUSTRALIA
Newborn Brands (NZ) Ltd.PO Box 47-677, Ponsonby,Auckland, 1144, NEW ZEALAND.
All IP rights held by Mayborn (UK) Limited and/orMayborn USA Inc., and/or its affiliates.Tommee Tippee®Copyright © 2019-20.Made in China.049100812111220_1
Tommee Tippee Penguin 2-in-1 Portable Night Light User Manual – Tommee Tippee Penguin 2-in-1 Portable Night Light User Manual –
[xyz-ips snippet=”download-snippet”]