express and GoPouch and Bottle WarmerINSTRUCTIONS FOR USE
- Replace water after every use
- Do not open lid whilst red light is on and unit is in operation
- If mains power is disconnected unit will reset
- Unit does not maintain temperature of feed
- Unit will not allow you to change the selection whilst in operation
- Do not store a bottle or pouch in the unit
Information on the disposal for Waste Electrical & Electronic Equipment (WEEE)This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery and recycling, please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE. Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation. The product is fitted with a BS 1363 mains plug containing a 13A fuse. If it ever becomes necessary to replace the fuse, only use fuses that are marked BS 1362, and rated at 13A. In the unlikely event that this plug is not suitable for the sockets in your home, it should be removed and a suitable plug fitted as follows:The wires of the mains lead are coloured in accordance with the following code:GREEN AND YELLOW – EARTH BLUE – NEUTRAL BROWN – LIVEAs these colours may not correspond with the coloured markings sometimes used to identify the terminals in the plug, connect as follows.The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the earth symbol or coloured GREEN or GREEN AND YELLOW.The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualified electrician.
Jackel International Limited trading as Mayborn GroupNorthumberland Business Park WestCramlingtonNorthumberlandNE23 7RH, UKLeaflet Number: 0422147Please read and retain this important information for future reference.Copyright © Jackel International Limited 2015Model Number: 1118Voltage: 220-240V ~ 50/60Hz 500WThis product complies with European Low Voltage Directive2014/35/EU and EMC Directive 2014/30/EUJackel International Limited retains all intellectual property rights to this product and packaging, including all two and three dimensional designs, graphic images, logos and text. Any unauthorised manufacture, publication, reproduction, communication or adaptation of any materials comprised in this product or its packaging is strictly prohibited and may constitute infringement of relevant laws.Jackel International Limited is incorporated in England and Wales under company number 01894022.TOMMEE TIPPEE and CLOSER TO NATURE are registered trademarks of Jackel International Limited.Any questions?Visit our website www.tommeetippee.comtommeetippee.com
IMPORTANT WARNINGSKEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE ASIT INCLUDES IMPORTANT INFORMATION.
Please ensure that you read these instructions thoroughly and use the appliance in accordance with instructions strictly. Please note misuse may lead to injury. Do not immerse in water.
This appliance can be used by children aged from 14 years and above if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made by children unless they are aged 14 years and above and supervised.
Keep the appliance and its cord out of reach of children aged less than 3 years.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with this appliance.
Ensure that the heating guidelines are followed to ensure that the food is not heated for too long.
For your child’s safety – Always check food temperature before feeding by testing on a sensitive part of your skin.
This appliance is intended for household use only. Do not use outdoors. User maintenance other than cleaning and descaling is not required for this product.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. If the supply cord is damaged, it must be changed by a qualified person in order to avoid a hazard. If the damage is from new, the unit must be returned to the manufacturer. If within a retail warranty period and proof of purchase retained; this product should be exchanged at place of purchase. The manufacturer will then be made aware.
Any questions?Visit our website www.tommeetippee.com
1. SETUP
Please refer to instructions leaflet before use and remember to clean and descale your unit regularly
2. USAGE
For your childs safety always check food temperature before feeding by testing on a sensitive part of the skin
3. CLEANING & DESCALING
The descaling process will remove deposits of calcium and other minerals in the system that may affect its performance
CLEANINGAfter each use, unplug and allow to cool before cleaning. Pour away any excess water and wipe with a damp cloth only. Do not clean with abrasive cleaners or allow to come in to contact with solvents or harsh chemicals, damage could result.DESCALINGWe recommend carrying out the descaling process approximately every 4-weeks. If you notice limescale earlier than 4-weeks, descaling may be required sooner. Living in a hard water area can produce limescale quicker than other areas. You can find out your water quality via your water provider.You may need to repeat either process if you find that limescale is still present.Alternatively, you may wish to use a specific descaling solution suitable for electric warmers if your build-up is significant, you may need to use a stronger solution.
There are two methods of descaling that you can follow for your warmer.Option 1:
- Empty the electric warmer and wipe down the inside with a clean sponge or damp cloth.
- Pour in 250ml of white vinegar.
- Leave for at least 30 minutes, or up to 24-hours depending on the extent of the limescale.
- Pour any remaining liquid down the sink. Rinse the interior of the warmer well with cool water and use a clean sponge or damp cloth to remove any build-up that came loose as a result of the descaling/cleaning process.
- Plug unit back in and add regular amounts of water you use for normal warming. Turn on and run for 5 minutes to remove any additional build-up. Upon completion, rinse warmer again and use as directed.
Option 2:
- Empty the electric warmer and wipe down the inside with a clean sponge ordamp cloth.
- Pour in 250ml of white vinegar.
- Turn on the warmer and run for a cycle, approximately 5-minutes.
- Unplug the unit and leave to cool, then pour any remaining liquid down the sink. Rinse the interior of the warmer well, with cold water and use a clean or damp cloth to remove any build up that came loose as a result of the descaling/cleaning process.
- Plug unit back in and add regular amounts of water you use for normal warming. Turn on and run for 5 minutes to remove any additional build up. Upon completion, rinse warmer again and use as directed.
Jackel International Limited trading as Mayborn GroupNorthumberland Business Park West CramlingtonNorthumberlandNE23 7RH, UKCopyright © Jackel International Limited 2015.TOMMEE TIPPEE is a registered trademark of Jackel International Limited.
Tommee Tippee Pouch and Bottle Warmer Instruction Manual – Tommee Tippee Pouch and Bottle Warmer Instruction Manual –
[xyz-ips snippet=”download-snippet”]