TOZO-T6-R True Wireless Earbuds Bluetooth Headphones Touch Control User Guide
How To Pair
TWS Auto Pairing Step
- Pick up two headsets from charging case, and they will power and pair to each other automatically within 10 seconds.
- The Indicators will flash to red and blue light alternatively. (In pairing mode)
- Selecting the [TOZO-T6] from device list in your Bluetooth manual.
Reset
Please consider to reset your earbuds to factory setting if any abnormal connectivity issues occurs by below steps:
- Pick up two earbuds from charging case, then holding both earbuds button for 5 seconds till red lights on to turn off earbuds.
- Pressing the MFB Touch Pannel on each of earbuds for another 5 seconds till red and blue light blinking simultaneously, and then clicking the MFB Touch Pannel on each of earbuds twice quickly, the reset process will be done when the purple light blinking.
NOTE:In case there is any unsuccessful message in your devices, please consider to delete historical records of [TOZO-T6) and try the paring process again.
Wearing Steps
Step1: Ensure sounds hole downward,then place earbuds into ear.Step2: Adjust the earbuds inside to your auricle snugly.
Left Earbud
Left Earbud
Power on: Pick up earbuds from battery case to pair to each automatically.Power off: Hold or put earbuds into battery case to power off automatically.
Right Earbud
Right Earbud
Power on: Pick up earbuds from battery case to pair to each automaticallyPower off: Hold or put earbuds into battery case to power off automatically.
[xyz-ips snippet=”download-snippet”]