tp-link AC1200 Wi-Fi Range Extender User Guide

Table of Contents

AC1200 Wi-Fi Range Extender

User GuideAC1200 Wi-Fi Range Extender RE300REV1.1.0 1910012612

Contents

About This Guide

Chapter 1 Get to Know About Your Extender

1. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 2. 1.LED Explanation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2. 2.Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 Set Up Internet Connection

2. 1. Power On the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2. Set Up the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62. 2. 1.Method 1: Via the TP-Link Tether App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2. 2.Method 2: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. 2. 3.Method 3: Via the WPS Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 3 OneMesh with Seamless Roaming

3. 1. What`s a OneMesh Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. 2. How to Set Up a OneMesh Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163. 2. 1.Method 1: Via the TP-Link Tether App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3. 2. 2.Method 2: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3. 3. Remove Extender from OneMesh Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3. 3. 1.Method 1: Via the TP-Link Tether App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 3. 3. 2.Method 2: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Chapter 4 TP-Link Cloud Service

4. 1. Register a TP-Link ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4. 2. Change Your TP-Link ID Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4. 3. Manage the User TP-Link IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224. 3. 1.Add TP-Link ID to Manage the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4. 3. 2.Remove TP-Link ID(s) from Managing the Extender . . . . . . . . . . . . . . . . . . . 23 4. 4. Manage the Extender via the TP-Link Tether App . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Chapter 5 Customize Your Network

5. 1. Check Internet Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5. 2. Configure Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5. 3. Change LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 5. 4. Adjust Wi-Fi Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 5. 5. Set Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5. 6. Set High Speed Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 6 Manage Your Extender

6. 1. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6. 2. Control LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6. 3. Set Power Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6. 4. Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 6. 5. Backup and Restore Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 6. 6. Change Login Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 6. 7. Check System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

FAQ

About This Guide

This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them.When using this guide, please notice that features of the extender may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only.

ConventionsIn this guide the following conventions are used:

ConventionUnderline Teal>

DescriptionUnderlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section.Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons and so on.The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab.

Note:

Ignoring this type of note might result in a malfunction or damage to the device.

Tip:

Indicates important information that helps you make better use of your device.

More InfoThe latest software, management app and utility are available from Download Center at https://www.tp-link.com/support/. The Quick Installation Guide can be found where you find this guide or inside the package of the extender. Specifications can be found on the product page at https://www.tp-link.com. A community is provided for you to discuss our products at https://community.tp-link.com. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support/.Speed/Coverage DisclaimerMaximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition.

Chapter 1Get to Know About Your ExtenderThis chapter introduces what the extender can do and its appearance. It contains the following sections: · Product Overview · Appearance

Chapter 1

Get to Know About Your Extender

1 1 Product OverviewBring Dead Zones Back to LifeTired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached.Easy Installation & Quick PositionThe extender works with any standard wireless router. Instantly connect the extender to a router by pressing the router’s WPS button (if available) followed by the extender’s WPS button. Alternatively, follow the Quick Setup instructions on the extender’s web management page. Once the extender is connected to a router, you can relocate it to your preferred location with no further configuration required. The intelligent signal light can help to find the best location.Easy Management with the TP-Link Tether AppTether provides a simple, intuitive way to access and manage your extender with your smart devices.1 2 Appearance

1 2 1 LED Explanation

You can check the extender’s working status by following the LED Explanation table. 3

Chapter 1

Get to Know About Your Extender

Name (Power)(Signal)2.4G 5G

Status On/Off Blinking Solid whiteSolid red Blinking Off On/OffOn/Off

Indication The extender is on or off.The system is starting up or firmware is being upgraded.The extender is connected to your router’s wireless network and is in a suitable location.The extender is experiencing poor signal strength. Try relocating it closer to your host router.WPS connection is in progress.No wireless connection is established.The extender is connected or not connected to the 2.4GHz wireless network of your host router.The extender is connected or not connected to the 5GHz wireless network of your host router.

1 2 2 Button Description

Button (WPS)Reset

DescriptionPress the WPS button on your host router, and immediately press this button on the extender for 1 second. The LED of the extender should change from blinking to solid on, indicating successful WPS connection.Use a pin to press the button for 1 second to reset the extender.

Chapter 2Set Up Internet ConnectionThis chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections: · Power On the Extender · Set Up the Extender

Chapter 2

Set Up Internet Connection

2 1 Power On the ExtenderPlug the extender into an electrical outlet next to your router, and then wait until the Power LED turns solid on.Note: For safety, only plug the extender in upright direction as shown below.

Solid On2 2 Set Up the ExtenderThere are three ways to set up the extender: via the TP-Link Tether app, via a web browser, or via the WPS button.2 2 1 Method 1: Via the TP-Link Tether App1. Launch the Apple App Store or Google Play Store and search TP-Link Tether or simply scan the QR code to download and install the app.OR2. Go to Wi-Fi Settings and connect your device to the extender’s wireless network: TP-Link_Extender. < Settings Wi-FiWi-Fi CHOOSE A NETWORK… TP-Link_Extender Other…6

Chapter 2

Set Up Internet Connection

3. Launch Tether and select your extender from the Local Device list.

4. Create a password to log in.

5. Follow app instructions to set up your extender. 6. (Optional) Enable Join OneMesh to copy the router’s wireless settings for seamlessroaming. For more information about OneMesh, refer to OneMesh with Seamless Roaming.Tip: It is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, your host router’s 2.4GHz and 5GHz share the same SSID (network name) and password. Refer to your host router’s user guide to enable Smart Connect.7

Chapter 2

Set Up Internet Connection

7. Relocate your extender and follow app instructions to enjoy the extended network.Tip: For more intuitive location assistant, access extender settings via Tether and go to Tools > Location Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices.2 2 2 Method 2: Via a Web Browser1. Connect your computer to the extender wirelessly as follows: · For Windows Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon on the taskbar and connect to the extender’s wireless network: TP-Link_Extender.

Connections are available

Wireless Network Connection TP-Link_Extender Connect automatically

Connect

· For Mac OS X Users 1 ) Unplug the Ethernet cable from your computer (if any). 2 ) Click the Wi-Fi icon in the top right corner of the screen, and connect to theextender’s network: TP-Link_Extender.Wi-Fi: On Turn Wi-Fi Off TP-Link_Extender Join Other Network… Create Network… Open Network Preferences…2. Follow the instructions of the Quick Setup Wizard to connect the extender to your host router. 1 ) Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address bar, and then create a password to log in.

Chapter 2

Set Up Internet Connection

Note: If the login window does not appear, please refer to FAQ.2 ) Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.

3 ) Select your host router’s 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.

Note: If your host router does not support 5GHz wireless network, please click Skip to continue.4 ) Confirm your host network password.9

Chapter 2

Set Up Internet Connection

5 ) Either keep the default SSIDs (network names) or customize them for the extended networks, and then click Next.Tip: If you connect the extender to a TP-Link OneMesh router, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. For more information, refer to OneMesh with Seamless Roaming.

6 ) Follow web instructions to relocate your extender for optimal Wi-Fi coverage and performance, and then click Done.

Chapter 2

Set Up Internet Connection

7 ) Enjoy! Connect to the extended network and enjoy the internet.Tip: If you connect the extender to a TP-Link OneMesh router and a success screen as below appears at the end of the setup, the extender has successfully joined the router’s OneMesh network and copied the router’s wireless settings. For more information, refer to OneMesh with Seamless Roaming.11

Chapter 2

Set Up Internet Connection

Tip: It is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, your host router’s 2.4GHz and 5GHz share the same SSID (network name) and password. Refer to your host router’s user guide to enable Smart Connect.2 2 3 Method 3: Via the WPS ButtonUse this way if your router has a WPS button. The button might look like one of these: .1. Press the WPS button on your host router, and then press the WPS button on the extender for 1 second within 2 minutes.

Note: For more information about using WPS button on your host router, please refer to the router manufacturer’s user guide.2. Wait until the Signal LED changes from blinking to solid on, which indicates that the WPS connection is successful.Note: If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App or Method 2: Via a Web Browser.3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect to the other band.4. Wait until the Signal LED turns solid on, and the setup is done.

Solid On

Extended Network Names: Router’s network name with _EXT at the endPasswords: Same as your router

Note: 1. If you want to customize the extended network name, refer to Configure Wireless Network. 2. If you cannot find the network names with _EXT in your Wi-Fi network list, this means that theextender has been connected to a OneMesh router and automatically copied its wireless settings. For more information, refer to OneMesh with Seamless Roaming.

Chapter 2

Set Up Internet Connection

3. It is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks. With Smart Connect enabled, your host router’s 2.4GHz and 5GHz share the same SSID (network name) and password. Refer to your host router’s user guide to enable Smart Connect.5. Relocate your extender for optimal Wi-Fi coverage and performance.1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.2 ) Wait for about 2 minutes until the Signal LED turns solid white. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.Suitable location Too far from router No connection

Router

Halfway

Devices

Tip: To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors.6. Enjoy! Connect to the extended network and enjoy the internet.

Chapter 3OneMesh with Seamless RoamingThis chapter introduces the TP-Link OneMeshTM feature. It contains the following sections: · What`s a OneMesh Network · How to Set Up a OneMesh Network · Remove Extender from OneMesh Network

Chapter 3

OneMesh with Seamless Roaming

3 1 What`s a OneMesh NetworkTP-Link OneMesh router and TP-Link OneMesh extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage.Unified Wi-Fi NetworkRouter and extenders share the same wireless settings, including network name, password, access control settings and more.Seamless RoamingDevices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.Easy Setup and ManagementSet up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page.To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.

Unified OneMesh Network

INTERNET

SAMENetwork Name & Password for seamless roaming

Chapter 3

OneMesh with Seamless Roaming

3 2 How to Set Up a OneMesh NetworkOnce the extender is connected to a TP-Link OneMesh router via web browser or WPS button, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. You can manually join a OneMesh network during the configuration via the TP-Link Tether app. For more information about setting up the extender with OneMesh network, refer to Set Up the Extender. If you have already set up the extender before joining the OneMesh network, choose one of the methods below to set up a OneMesh network:Note: Before setting up a OneMesh network, it is recommended to enable Smart Connect on your host router to enjoy a seamless connection between dual-band networks.3 2 1 Method 1: Via the TP-Link Tether App1. Launch Tether and select the extender you want to join the OneMesh network. 2. Go to Tools > OneMesh and enable OneMesh.Tip: If your host router does not support OneMesh, you need to reselect a host network first. Go to Tools > Host Network and click Reselect Host Network, and then follow the app instructions to complete the configuration.

3. Follow the app instructions to join the OneMesh network. 16

Chapter 3

OneMesh with Seamless Roaming

3 2 2 Method 2: Via a Web Browser1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > OneMesh and enable Join OneMesh.Tip: If your host router does not support OneMesh, you need to reselect a host network first. Go to Settings > Wireless > Connect to Network and follow the instructions to complete the configuration.

3. Follow the web instructions to join the OneMesh network. After that, you can view all the devices in OneMesh network in Basic > OneMesh on the web management page of your host router.17

Chapter 3

OneMesh with Seamless Roaming

3 3 Remove Extender from OneMesh NetworkIf you want to remove the extender from the OneMesh network, follow the steps below:3 3 1 Method 1: Via the TP-Link Tether App1. Launch Tether and select the extender you want to remove from the OneMesh network.2. Go to Tools > OneMesh and disable OneMesh. Or 1. Launch Tether and select your host router of the OneMesh network. 2. Go to Tools > OneMesh and select the extender you want to remove from theOneMesh network. 3. Click Remove Device.

3 3 2 Method 2: Via a Web Browser1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > OneMesh and disable Join OneMesh.18

Chapter 3

OneMesh with Seamless Roaming

Chapter 4TP-Link Cloud ServiceTP-Link Cloud service provides a better way to manage your cloud devices. Log in to your cloud device with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet. To ensure that your cloud device stays new and gets better over time, the TP-Link Cloud will notify you when an important firmware upgrade is avaliable. Surely you can also manage multiple TP-Link Cloud devices with a single TP-Link ID. This chapter introduces how to register a new TP-Link ID, bind or unbind TP-Link IDs to manage your cloud device, and the Tether app with which you can manage your home network no matter where you may find yourself. It contains the following sections: · Register a TP-Link ID · Change Your TP-Link ID Information · Manage the User TP-Link IDs · Manage the Extender via the TP-Link Tether App

Chapter 4

TP-Link Cloud Service

4 1 Register a TP-Link IDWhen you log in after initial setup, the web page will ask whether you need TP-Link Cloud service. You can also access the TP-Link Cloud settings as follows: 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > TP-Link Cloud. 3. Click Register Now and follow the instructions to register a TP-Link ID.

4. After activating your TP-Link ID, come back to the TP-Link Cloud page to log in. The TP-Link ID used to log in to the extender for the first time will be automatically bound as an Admin.Notes: · To learn more about the Admin and User TP-Link ID, refer to Manage the User TP-Link IDs. · Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via theTether APP. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new one. · If you want to unbind the admin TP-Link ID from your extender, please go to Settings > TP-Link Cloud, an click Unbindin the Device Information section.4 2 Change Your TP-Link ID InformationFollow the steps below to change your email address and password of your TP-Link ID as needed. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Account Information section. · To change your email address: 1. Click behind the Email. 2. Enter the password of your TP-Link ID, then a new email address. And click Save.21

Chapter 4

TP-Link Cloud Service

· To change your password: 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save.

4 3 Manage the User TP-Link IDsThe TP-Link ID used to log in to the extender for the first time will be automatically bound as the Admin account. An admin account can add or remove other TP-Link IDs to or from the same extender as Users. All accounts can monitor and manage the extender locally or remotely, but user accounts cannot: · Reset the extender to its factory default settings either on the web management pageor in the Tether app.22

Chapter 4

TP-Link Cloud Service

· Add/remove other TP-Link IDs to/from the extender.

4 3 1 Add TP-Link ID to Manage the Extender

1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID.

2. Go to Settings > TP-Link Cloud, and focus on the Bound Accounts section.

3. Click

, enter another TP-Link ID as needed and click Save.

Note: If you need another TP-Link ID, please register a new one via the Tether app. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new TP-Link ID.

4. The new TP-Link ID will be displayed in the Bound Accounts table as a User.

4 3 2 Remove TP-Link ID(s) from Managing the Extender1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID. 2. Go to Settings > TP-Link Cloud, and focus on the Bound Accounts section. 3. Tick the checkbox(es) of the TP-Link ID(s) you want to remove and click Unbind.23

Chapter 4

TP-Link Cloud Service

4 4 Manage the Extender via the TP-Link Tether AppThe Tether app runs on iOS and Android devices, such as smartphones and tablets. 1. Launch the Apple App Store or Google Play store and search “TP-Link Tether” orsimply scan the QR code to download and install the app.

OR2. Connect your device to the extender’s or host router’s wireless network. 3. Launch the Tether app, select the model of your extender and log in with your TP-LinkID or the password your set for the extender. 4. Manage your extender as needed.Note: If you need to remotely access your extender from your smart devices, you need: · Log in with your TP-Link ID. If you don’t have one, refer to Register a TP-Link ID. · Make sure your smartphone or tablet can access the internet with cellular data or a Wi-Fi network.

Chapter 5Customize Your NetworkThis chapter guides you on how to configure network settings that are available for this extender. It contains the following sections: · Check Internet Status · Configure Wireless Network · Change LAN Settings · Adjust Wi-Fi Coverage · Set Access Control · Set High Speed Mode

Chapter 5

Customize Your Network

5 1 Check Internet StatusYou can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Status to view the internet status of your extender.· The extender runs normally.

· The extender fails to connect to the host networks. Please go to Settings > Wireless > Connect to Network to check whether the host network passwords are correct. If the problem still exists, relocate the extender closer to the router to achieve better signal quality.· The extender is connected to the host networks, but is not transmitting data. Please check the internet connection of your router.· The extender is connected to the router abnormally. Please go to Settings > Network and try setting your extender to obtain an IP address automatically.

Click the icon of the Internet/Router/Range Extender/Clients to view corresponding information.26

Chapter 5

Customize Your Network

5 2 Configure Wireless NetworkIf you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended networks.Tip: If the extender is in your router’s OneMesh network, it will automatically copy wireless settings from your router. No wireless settings is needed for the extender.Visit http://tplinkrepeater.net, and log in with the password you set for the extender.Note: Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender, please refer to the instructions to set your 5GHz network.· To extend another host network: 1. Go to Settings > Wireless > Connect to Network. 2. Enable Connect to 2.4GHz Network and click Wireless Scanner to find all availablenetworks.

3. Select the 2.4GHz host network you want to extend.Note: If the network you want to extend is on but not listed, please try the following steps. · Move the extender closer to your router, and rescan for networks. · You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.4. Once a host network is selected, the SSID and security type will be automatically filled in. If the selected network is encrypted, enter the password in the Password field.27

Chapter 5

Customize Your Network

5. Click Save.· To enable or disable the extended network: 1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless functionof a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid. 3. Click Save.· To change the wireless network name (SSID): 1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value iscase-sensitive. 3. Click Save.Note: If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied. Please write down the new SSID for future use.· To hide the SSID of the extended network: 1. Go to Settings > Wireless > Extended Network. 2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed whenwireless devices scan for local wireless networks. You need to manually enter the SSID to join the network. 3. Click Save.5 3 Change LAN SettingsThe extender is preset with a default LAN IP 192.168.0.254, with which you can log in to the web management page. The LAN IP address, together with the Subnet Mask, also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address. 4. Enter a new IP Address as needed and leave the Subnet Mask as the default settings . 5. Enter the gateway that is in the same subnet as the IP address. The gateway is usuallythe LAN IP address of your router. 6. Enter the DNS IP address provided by your ISP.28

Chapter 5

Customize Your Network

7. Click Save.5 4 Adjust Wi-Fi CoverageYou can set the extender’s Wi-Fi coverage depending on how large you want your Wi-Fi area to be. 1. Visit http://tplinkrepeater.net and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Wi-Fi Coverage. 3. Select your desired Wi-Fi coverage level for the extender.

Chapter 5

Customize Your Network

4. Click Save.5 5 Set Access ControlAccess Control allows you to permit or block specific devices from accessing the internet for a specific period.Tip: If the extender is in your router’s OneMesh network, it will automatically copy access control settings from your router. No access control settings is needed for the extender.1. Visit http://tplinkrepeater.net and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Access Control. 3. Enable Access Control.

· To block specific device(s): 1. Select Blacklist and click Save.

2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox.3. Click Block and the selected device(s) will be added to the Devices in Blacklist table.

4. Click in the Devices in Blacklist table to set the Effective Time for a certain entry as needed.30

Chapter 5

Customize Your Network

5. Click OK. · To permit specific device(s): 1. Select Whitelist and click Save.2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed.3. Click OK. 31

Chapter 5

Customize Your Network

5 6 Set High Speed ModeThe High Speed feature switches off one of the wireless bands to leave one highperformance, super-fast network, ideal for HD streaming and gaming applications.If most of your devices are connected to one wireless band, this feature can increase the overall performance of your wireless network.Notes: 1. This function is not available when the extender is in a OneMesh network. 2. Before enabling this feature, please go to Settings > Wireless > Extended Network and check that the 2.4GHz and5GHz bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, it’s recommended to first make sure all your wireless devices support 5GHz network connection.1. Visit http://tplinkrepeater.net and log in with the password you set for the extender.2. Go to Settings > Advanced Settings > High Speed.3. Enable High Speed Mode.4. Select the Auto mode. The extender will decide which band the high-speed network will work on based on its wireless connection to your host router. The other band will be disabled.

5. Click Save. 32

Chapter 6Manage Your ExtenderThis chapter presents how to manage and maintain your extender. It includes the following sections: · Set System Time · Control LEDs · Set Power Schedule · Upgrade the Firmware · Backup and Restore Configuration Settings · Change Login Password · Check System Log

Chapter 6

Manage Your Extender

6 1 Set System TimeThe System Time of the extender will be used for time-based function such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings.· To get system time: 1. Select your local Time Zone from the drop-down list.

2. Click Save. · To set up Daylight Saving Time: 1. Select Enable Daylight Saving Time.

2. Select the Start and End date and time of the daylight saving time at your local time zone.3. Click Save.6 2 Control LEDsThe LEDs of the extender indicate its activities and status. You can turn off LEDs when you don’t need them. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.34

Chapter 62. Go to Settings > System Tools > LED Control. · To turn off the LEDs: Disable LED Status.

Manage Your Extender

· To specify a time period when LEDs are off: 1. Select Night Mode. 2. Specify the LED off time period. 3. Click Save.

6 3 Set Power ScheduleThe Power Schdule feature allows you to specify a time period during which the extender is off. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Power Schedule. · To specify a time period when the extender is off: 1. Click Add. 2. Specify the power off time period and repetitive days.35

Chapter 6

Manage Your Extender

3. Click Save.6 4 Upgrade the FirmwareTP-Link is committed to improving product features, giving you a better network experience. We will inform you through the web management page if there’s any update firmware available for your extender. Also, the latest firmware will be released at the TPLink official website www.tp-link.com, and you can download it from the Support page for free.Notes: · Make sure the latest firmware file is matched with the hardware version (as shown in the download section of theSupport page). · Make sure that you have a stable connection between the extender and your computer. · Backup your extender configuration. · Do NOT power off the extender during the firmware upgrade.· To upgrade the firmware online: 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. When the latest firmware is available for your extender, the update icon will displayin the top-right corner of the page. Click the icon to go to the Firmware Upgrade page. Alternatively, you can go to Settings > System Tools > Firmware Upgrade, and click Check for upgrade to see whether a new firmware is released.36

Chapter 6

Manage Your Extender

3. Focus on the Online Upgrade section, and click Upgrade.4. Wait a few minutes for the upgrade and reboot to complete. · To upgrade the firmware locally: 1. Download the latest firmware file for the extender from our websitewww.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 3. Go to Settings > System Tools > Firmware Upgrade. 4. Click Browse to locate the downloaded new firmware file, and then click Upgrade.5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot.6 5 Backup and Restore Configuration SettingsThe configuration settings are stored as a configuration file in the extender. You can backup the configuration file and restore the extender to the previous settings from the backup file when needed. Moreover, if necessary, you can erase the current settings and reset the extender to the default factory settings. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Backup & Restore. · To backup configuration settings:37

Chapter 6

Manage Your Extender

Click Backup to save a copy of the current settings to your local computer. A `.bin’ file of the current settings will be stored on your computer.

· To restore configuration settings:1. Click Browse to locate the backup configuration file stored on your computer, and click Restore.

2. Wait a few minutes for the restore and reboot.Note: During the restore process, do not power off or reset the extender.· To reset the extender to factory default settings: 1. Click Factory Restore to restore all configuration settings to default values, or clickRestore if you want to keep you login and cloud account information.

2. Wait a few minutes for the reset and reboot.Notes: · During the reset process, do not power off the extender. · We strongly recommend you backup the current configuration settings before resetting the extender.6 6 Change Login PasswordThe account management feature allows you to change your login username and password of the web management webpage. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.38

Chapter 6

Manage Your Extender

2. Go to Settings > System Tools > Admin Account.3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save.

4. Use the new password for future logins.6 7 Check System LogIf the extender is not working properly, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > System Log. · To save the system log locally: 1. Choose the type and level of the system log as needed. 2. Click Save Log to save the system logs to a local disk.

FAQQ1 How to reset the extender to its factory default settings?· With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot.· Log in to the extender’s web management page. Go to Settings > System Tools > Backup & Restore and click Factory Restore.Q2 What should I do if I forget my login password?Refer to FAQ > Q1 to reset the extender, and then visit http://tplinkrepeater.net to create a new login password.Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password for future logins.Q3 What should I do if I forget my wireless password?The extender shares the same wireless passwords as those of your host networks.Q4 What should I do if I can’t access the web management page?This can happen for a variety of reasons. Please try the methods below to log in again. · If your computer is wirelessly connected, make sure that you have connected to theextender’s SSID. · Make sure your computer is configured as Obtain an IP address automatically andObtain DNS server address automatically. · Verify that http://tplinkrepeater.net is correctly entered in the web browser and pressEnter. · Use the IP address to access the extender. The default IP is 192.168.0.254. If theextender is connected to the router, you should go to your router’s DHCP client list to obtain the extender’s current IP address. · Reset the extender and try again.Q5 I have enabled wireless MAC filter, wireless access control, or access control list (ACL) on my router What should I do before configuring the extender?When a device connects through the extender to your router, the MAC address of the device shown on the router is translated to another MAC address. If your router’s MAC filter, wireless access control, or ACL is enabled, the devices connected to the extender cannot get an IP address from the extender and cannot access the Internet. To solve this problem, please follow the steps below:40

1. Log in to your router and disable the MAC filter, wireless access control or ACL.Note: For more information about how to disable your router’s MAC filter, wireless access control or ACL, please refer to your router’s user guide.2. Power on your extender, and run the Quick Setup to configure your extender. 3. Connect all of your devices to the extended network. 4. On your router, add all the Online Devices’ MAC addresses to your router’s MAC filtertable. 5. Enable the router’s MAC filter, wireless access control, or ACL to complete theconfiguration.41

Specifications are subject to change without notice.

is a registered trademark

of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or

registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.

FCC compliance information statementProduct Name: AC1200 Wi-Fi Range Extender Model Number: RE300 Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that maycause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.43

FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.” This device is restricted in indoor environment only. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.Issue Date: 2019-07-0844

CE Mark WarningThis is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz (23dBm) 5250 MHz -5350 MHz (23dBm) 5470 MHz -5725 MHz (30dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Attention: This device may only be used indoors in all EU member states and EFTA countries.Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may causeundesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :45

1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si lebrouillage est susceptible d’en compromettre le fonctionnement. Caution: 1. The device for operation in the band 51505250 MHz is only for indoor use to reducethe potential for harmful interference to co-channel mobile satellite systems; The high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. DFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz. Avertissement: Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Les produits utilisant la technique d’atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements . NCC Notice & BSMI Notice46

4.7.9.1

4.7.9.2

CrVI

PBB

PBDE

PCB

–

1. “0.1 wt %” “0.01 wt %”

2. “”

3. ” – ”

, .

Safety Information · Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. · Do not use the device where wireless devices are not allowed. · The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanations of the symbols on the product label

Symbol

Explanation Class II equipment

AC voltage

Indoor use onlyRECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/ EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Protection earth

References

[xyz-ips snippet=”download-snippet”]

Posted

2023-01-18

tp-link

admin

Tags:

_pdf, AC1200 Wi-Fi Range Extender, RE300, TP-Link