TP-Link Powerline Extender Instruction Manual

https://www.tp-link.com

For technical support, the User Guide and other information, please visit https://www.tp-link.com/support.

© 2021 TP-Link 7106509129 REV2.2.1

Quick Installation Guide

Powerline Extender

*Images may differ from actual products.

CONTENTS

01 / English

English

Powerline

Internet, WAN, LAN, Adapter
Extender
  1. Connect the adapter to a LAN port of your router using an Ethernet cable.
  2. Plug the powerline devices into the wall outlets near each other and on the same electrical circuit.
  3. Pair the powerline devices.

A. Press the Pair button on the powerline adapter for 1 second. The Power LED  starts blinking.* If the Power LED does not blink, press the Pair button again.B. Within 2 minutes, press the Pair button on the powerline extender for 1 second. The Power LED starts blinking. When the Powerline LED turns on, it’s done.

1

English

4. Relocate the powerline extender to a new location. Connect to the Wi-Fi using the SSIDand password on the product label.* A blinking or red Powerline LED indicates poor signal strength. Move the extender to another location.

5. Enjoy!Tip: You can add more powerline devices to the existing powerline network by pairing these devices.

Attention

  • Plug the powerline devices directly into the wall outlets but not the power strips.
  • For pass through powerline devices, plug the power strips into the integrated electrical sockets of the powerline devices.

Copy Wi-Fi Settings from Router to Extender

If your router supports WPS, you can follow the steps below to automatically copy the router’s Wi-Fi settings (SSID and password) to the powerline extender.

2

English

WPS, tp-link
  1. Plug in the powerline extender near your router. Press the WPS button on your router.
  2. Within 2 minutes, press the Wi-Fi button on the extender for 1 second.
  3. When the 2.4GHz Wi-Fi LED and 5GHz Wi-Fi LED on the extender blink quickly for 3 seconds, and then stay on, it’s done!

* 5 GHz Wi-Fi is not available on single-band products. For multiple-band products, the powerline extender copies by default both 2.4 GHz and 5 GHz wireless settings at the same time. If it fails to copy both, your router may be only able to clone one band at a time. Please check your router’s manual for support.

Note: The wireless settings can also be configured through the powerline extender’s web interface or through the tpPLC app. You can download the app from the App Store or Google Play, or simply scan the QR code.

3

English

FAQ (Frequently Asked Questions)

Q1. How do I reset my powerline extender?A. With the extender powered on, press and hold the Reset button (use a pin if it is a hole) until all LEDs turn off. When all LEDs turn on again, the reset process is complete.

Q2. How to troubleshoot if there is no internet connection in my powerline network?A1. Make sure all adapters and extenders are on the same electrical circuit.A2. Make sure all Powerline LEDs are on. If not, pair your adapters and extenders again.A3. Make sure all hardware connections are correctly and securely connected.A4. Check if you have an internet connection by connecting the computer directly to the modem or router.

Q3. What can I do if a successfully-paired extender does not reconnect after being relocated?A1. Make sure all powerline devices are on the same electrical circuit.A2. Pair it again with another adapter or extender, and make sure the Powerline LED is on before relocating it.A3. Check for possible interference, such as washers, air conditioners or other household appliances that may be too close to one of the powerline adapters or extenders.

4

English:TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives (EU)2015/863, 2014/53/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce

English: Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use the device where wireless devices are not allowed.         
  • The socket-outlet shall be installed near the equipment and shall be easily accessible.
  • For pass through devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
  • Plug the powerline devices directly into the wall outlets but not the power strips.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,