tp-link RE505X Range Extender User Guide

Quick Installation GuideRange ExtenderRE505X

Need setup videos?Scan the QR code, or visit https://www.tp-link.com/download/RE505X.html

Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Set Up the Extender Via the Tether App

  1. Get the up-to-date Tether app from the Apple App Store or Google Play, or simply scan the QR code.http://www.tp-link.com/common/promos/app_tether_v2.html?ref=QRCode
  2. Launch the Tether app. Tap the + button on the upper-right corner and select Range Extender.
  3. Follow app instructions to complete the setup. The LED should turn solid on, indicating a successful connection to your router.Note: If the LED does not turn solid on, please refer to FAQ > Q2.

Other Setup Methods:You can also set up the extender via the WPS button or via a web browser. For details, please refer to the user guide at https://www.tp-link.com/support.

Relocate

  1. Plugin the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.
  2. Wait for about 2 minutes until the LED turns solid blue. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.Tip: For more intuitive location assistance, access extender settings via the Tether app and go to Tools > Location Assistant.

Enjoy!Connect your devices to the extender wirelessly or via an Ethernet cable, then enjoy the internet. The password of your extended network is the same as your host router.Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a wireless one. For details, refer to the user guide at https://www.tp-link.com/support.

Access Extender Settings

After setup, you can access extender settings via any of the methods below. You can reselect the host networks, change extended network settings, and more.Note: If your extender and router use the same network name, Method 1 is recommended.Method 1: Via the Tether App1. Connect your smartphone to the extender`s or router’s network. 2. Launch the Tether app, select your extender, and log in. 3. View or change extender settings as needed.Method 2: Via a Web Browser

  1. Connect your computer or smartphone to the extender’s network. If you are using a computer, unplug the Ethernet cable if any.
  2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
  3. View or change extender settings as needed.

LED Explanation

LED Status Indication (For Range Extender Mode)

(Power)

On/OffBlinking The extender is on or off.The system is starting up or a firmware upgrade is in progress.

(Signal)

Solid blueSolid redBlinkingOff The extender is connected to your router’s wireless network and is in a suitable location.The extender is receiving a weak signal. Try relocating it closer to your router.WPS connection is in progress.No wireless connection is established.
2.4GHz On/Off The extender is connected or not connected to the 2.4GHz wireless network of your router.
5GHz On/Off The extender is connected or not connected to the 5GHz wireless network of your router.

OneMeshTM with Seamless Roaming

TP-Link OneMesh router and extenders work together to form one unified Wi-Fi network. Walkthrough your home and stay connected with the fastest possible speeds thanks to OneMesh’s seamless coverage.Unified Wi-Fi NetworkRouter and extenders share the same wireless settings, including network name, password, access control settings, and more.Seamless RoamingDevices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.Easy Setup and ManagementSet up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page.

To check the full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility/.

Unified OneMesh Network

FAQ (Frequently Asked Questions)

Q1. What should I do if the Tether app cannot find my device?

• Try another method by following the steps below:

  1. Connect your smartphone to the extender’s network TP-Link_Extender.
  2. Launch the Tether app, and select your extender.
  3. Follow app instructions to complete the setup. If you are still having problems, contact our technical support.

Q2. What should I do if the LED doesn’t turn solid on after completing the setup via the Tether app or web browser?

  • You may have entered an incorrect Wi-Fi password for your host router during the configuration. Check the password and try again.
  • Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
  • If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
  • Try setting it up via the WPS button.
  • Reset the extender and go through the configuration again. If you are still having problems, contact our technical support.

Q3. How do I reset the extender?

• With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.

Safety Information

  • Keep the device away from water, fire, humidity, or hot environments.
  • Do not attempt to disassemble, repair, or modify the device.
  • Do not use the device where wireless devices are not allowed.
  • The socket outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

report this ad

To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.If you have any suggestions or needs for our product guides, you are welcome to email [email protected].For technical support, the user guide, and other information, please visit https://www.tp-link.com/support/, or simply scan the QR code.©2020 TP-Link 7106508675 REV1.0.1

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by