tp-link TX401 10 Gigabit PCIe Network Adapter User Guide

User Guide10 Gigabit PCIe Network AdapterTX401

About This Guide

This guide is a complement to the Quick Installation Guide. The Quick Installation The guide instructs you on quick installation, and this guide provides the productoverview and detailed instructions for each step.

When using this guide, please notice that the features available of the adapter may vary by model and software version. The adapter’s availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

ConventionsIn this guide, the following conventions are used:

Convention   Description
Teal Underline Hyperlinks are in teal italic. You can click to redirect to a website or a specific section.
 Teal Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons, etc.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
Tips: Indicates important information that helps you make better use of your device.
  • Maximum wired data throughput rates are the physical rates derived from IEEE Standard 802.3 specifications. Actual wired data throughput is not guaranteed and will vary as a result of environmental factors, Ethernet cable class, and computer performance.
  •  To ensure compatibility, you may need to update the adapter’s drivers after an OS update. You can check the full list of OS support in the download center attp-link.com/download-center.

More Info

Chapter 1

Get to Know About Your Adapter

This chapter introduces what the adapter can do and shows its appearance.This chapter contains the following sections:

  •  Product Overview
  •  LED Status

1. 1. Product Overview

Combined with the latest 10GBase-T Technology, TX401 delivers extreme speeds of up to 10 Gbps, which is 10× faster than typical Gigabit adapters, guaranteeing smooth data transmissions for all your bandwidth-intensive tasks. This will lead you to a new era of 10 Gbps home networking.

With extreme speed and ultra-low latency, 10GBase-T is backward compatible with Fast Ethernet and Gigabit Ethernet, automatically negotiating between higher and lower speed connections.

1. 2. LED Status

LED Status:

LED Status
10G Link Flashing: The adapter is working at 10 Gbps.

Off: No link or the adapter is working at a different speed.
Link Flashing: The adapter is working at 5 Gbps/ 2.5 Gbps/ 1 Gbps/ 100 Mbps.

Off: No link or the adapter is working at a different speed.

Tips:

If neither LED flashes, check whether the adapter is detected by the computer or the driver is successfullyinstalled.

Chapter 2

Connect to a Computer

This chapter introduces how to connect the adapter to your computer.

Before you begin using your adapter, insert the adapter into your computer by following these steps.

  1. Turn off the computer, unplug the power cable and remove the case panel.
  2. Locate an available PCI-E slot and carefully insert the adapter.Note:If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket provided.
  3. Replace the case panel, plug in the power cable, and turn on your computer.Then connect the Ethernet cable to the adapter.

Chapter 3

Install Driver

This chapter introduces how to install your adapter’s driver in different Windows systems, including Windows 7/8/8.1/10.

  1.  Insert the CD and run the Autorun.exe.

Note:

  1. You can also download the driver or check the new release at https://www.tp-link.com/download-center
  2. To install driver on Linux, refer to https://www.tp-link.com/faq-2868.html
  3. Select your adapter to start driver installation.
  4.  Follow the instructions to complete the installation.

Appendix: Troubleshooting

T1. What should I do if the adapter is not detected?

T2. How to find the hardware version of the adapter?

  • The hardware version is printed on the product label on the package or the adapter.There is a character string “Ver: X.Y” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter.
  • Visit https://www.tp-link.com/faq-46.html and follow the second method to find the hardware version of the adapter.

T3. What should I do if the PC cannot find the new hardware?

  •  Restart your computer and try again.
  •  Check if the network adapter is inserted in the PCI Express slot properly.
  •  Reinsert the adapter or try to change another PCI Express slot.
  • Try inserting the adapter on a different computer.
  • Make sure you meet the minimum system requirements for the adapter and that thelatest Windows and system updates are installed on your computer.
  •  If the problem persists, contact our Technical Support.

T4. How to check if I have installed the driver for my adapter successfully or not?

  1. On your computer, please right-click the Computer icon and go to Manage;
  2.  Open the Device Manager and go to Network adapters, and then find thecorresponding TP-Link adapter, right-click it and then go to Properties;
  3. If you can see “This device is working properly.” in the red box, you have alreadyinstalled the driver successfully.

FCC compliance information statement

Product Name: 10 Gigabit PCIe Network AdapterModel Number: TX401Responsible party:TP-Link USA Corporation, d/b/a TP-Link North America, Inc.Address: 145 South State College Blvd. Suite 400, Brea, CA 92821Website: https://www.tp-link.com/us/Tel: +1 626 333 0234Fax: +1 909 527 6803E-mail: [email protected]This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

We, TP-Link USA Corporation, have determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2020.06.23

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU declaration of conformityTP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.The original EU declaration of conformity may be found athttps://www.tp-link.com/en/ce

Canadian Compliance StatementThis device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

  1.  L’appareil ne doit pas produire de brouillage;
  2.  L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

BSMI Notice

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  •  Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

report this ad

Explanation of the symbols on the product label

Symbol

Explanation
For indoor use only
RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

©2020 TP-Link 1910012841 REV1.0.0

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,