TRIANIUM Smartphone UV Sanitizer and Charge Box User Manual

Smartphone UV Sanitizer & Charge Box

USING AS A SANITIZER

**The sanitization process will take Up to 6 minutes**

Step 1: Plug in the Power Cable. Now, plug the circular jack into the UV Sanitizer to Power ON.

Step 2: Put a smartphone inside and close the lid. The sanitization process takes 6 minutes and a Blue Indicator Light will BLINK during the process.

Step 3: After 6 minutes, the Blue Indicator Light will shut OFF. The sanitization process is DONE. Now, simply remove the smartphone.

TECHNICAL SPECS

USING AS A SMARTPHONE CHARGER

1. Find either the USB Type-A port or USB-Type C port behind the device.
2. Using YOUR OWN charging cable, plug it into the corresponding port.
3. Plug your charging cable into your smartphone and fit it through the cutout.
4. The sanitization process takes 6 minutes. But, you can keep your smartphone INSIDE the device to CONTINUE charging.

Smartphone UV Sanitizer & Charge Box

FAQ

Q: Why does the sanitizing process continue after my smartphone has already been cleaned?A: The sanitization process begins whenever the lid is CLOSED. Meaning, the UV Sanitizer will continue to clean for 6 minutes even AFTER the smartphone is removed and the lid is closed. This ensures the UV Sanitizer chamber is sanitized before placing another item inside.Q: Can I keep my case on during the sanitizing process?A: Yes, you can. You can keep your phone case ON during the sanitizing process. Our product works with the majority of standard smartphone cases.Q: Can this product clean other objects besides smartphones?A: Yes, it can also clean small objects such as: car/house keys, remotes, jewelry, and even small tablets.Q: How does the UV Light work? Where is it located?A: There is a powerful UV Light Wavelength, UVC, which is an ultraviolet light that dissolves and disintegrates harmful germs and bacteria. The UV light bulbs are located at the top and bottom of the UV Sanitizer chamber. UVC is extremely powerful and is dangerous to the human eye. Ensure you DO NOT crack open the lid while the sanitization process is occurring. In doing so, you may be exposed to UVC light which can damage the eyes and skin.

WARNINGS

Please ensure all users read through the following Warnings section thoroughly in order to avoid any harm, damage, or accidental injuries to themselves and/or their personal devices.

1. NEVER put a wet, damp, or moist product into the device. ALL products placed into the device must be visibly clean and dry of any type of liquid.
2. While disinfecting multiple products, DO NOT stack them on top of each other or allow the sides of each product to touch.
3. DO NOT place any type of medical product into the device in order to be sanitized.
4. NEVER let non-protected eyes or skin be fully exposed to UVC lighting. AVOID ingestion, inhalation, and contact of any kind specifically with the eyes or skin.
5. NEVER bypass any of the built-in safety instructions or precautions within this manual or the device because in doing so may expose you to dangerous UVC light. Extended skin exposure may cause reddening of the skin and/or an extremely uncomfortable sunburn sensation.
6. NEVER allow CHILDREN to operate the device.
7. NEVER try to tamper, adjust, modify, break, disassemble, or repair the product on your own.
8. NEVER place food, drinks, or liquids of any kind into the device. In the case of a liquid spill, immediately disconnect the device.
9. NEVER try to sanitize any type of product besides a smartphone or non-critical medical device.
10. In the case of broken UV light bulbs, they must be disposed of properly at an official hazardous waste disposal plant in partnership with local, state, and federal rules and regulations. NEVER throw UV light bulbs directly into the trash can for they must be recycled properly.