TRiSTAR LS-80 Breathe Pure Air Purifier User Manual

breathe pure™ AIR PURIFIERUser ManualMODEL: LS-80

SAVE THESE INSTRUCTIONS. FOR CONSUMER USE ONLY.Visit TristarCares.comfor tutorial videos, product details, and more.Guarantee Information Inside

Safeguards

IMPORTANT SAFETY INSTRUCTIONSREAD AND SAVE THESE SAFETY INSTRUCTIONSBEFORE USING THIS PRODUCT.When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury, including the following:

  1. Read all instructions before operating the appliance.
  2. Always turn the appliance controls to the OFF position and unplug from the wall outlet when not in use.
  3. Do not use the appliance outdoors.
  4. Never use the appliance unless it is fully assembled.
  5. Do not use the appliance where combustible gases or vapors are present.
  6. Do not expose the appliance to rain or use near water, in a bathroom, where laundry is cleaned, or in any other damp location.
  7. Do not allow foreign objects to enter the ventilation or exhaust opening because this may cause electric shock or damage to the appliance. Do not block the air outlets or intakes.
  8. Do not use an extension cord.
  9. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
  10.  A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace a loose or worn outlet.
  11. Disconnect the power supply before servicing.SAVE THESE INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS APPLIANCE WITH ANY SOLID-STATE SPEED CONTROL DEVICE.

Maintenance

  • Ensure the appliance is switched off and disconnected from the power supply before cleaning the appliance.
  • Use a soft, dry towel to clean the air outlet or the surface of the appliance.

Directions For Use

  1. Plug the appliance into a power outlet.
  2. To turn the appliance on, press the On/Off button. The LED Indicator will illuminate and the appliance will start working.
  3. To turn the appliance off, press the On/Off button again. The LED Indicator will darken. Always turn the appliance off when not in use.NOTE: Do not use this appliance in a damp environment because a damp environment might shorten the lifespan of the appliance.

60-Day Money-Back Guarantee

The Breathe Pure Air Purifier is covered by a 60-day money-back guarantee. If you are not 100% satisfied with your product, return the product and request a replacement product or refund. Proof of purchase is required. Refunds will include the purchase price, less processing and handling. Follow the instructions in the Return Policy below to request a replacement or refund.Replacement Guarantee PolicyOur products, when purchased from an authorized retailer, include a 1-year replacement guarantee if your product or component part does not perform as expected, the guarantee extends only to the original purchaser and is not transferable. If you experience an issue with one of our products within 1 year of purchase, return the product or the component part for replacement with a functionally equivalent new product or part. The original proof of purchase is required, and you are responsible to pay to return the unit to us. In the event a replacement unit is issued, the guarantee coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing guarantee, whichever is later. Tristar reserves theright to replace the unit with one of equal or greater value.Return PolicyIf for any reason, you would like to replace or return the product under the money-back guarantee, your order number can be used as the return merchandise authorization number (RMA). If the product was purchased in a retail store, return the product to the store or use “RETAIL” as the RMA. Return your product to the address provided below for a replacement, which will incur no additional processing and handling fees, or for the refund of your purchase price, less processing, and handling. You are responsible for the cost of returning the product. You can locate your order number at www.customerstatus.com. You can call customer service at 973-287-5162 or email [email protected] for any additional questions. Pack the product carefully and include in the package a note with (1) your name, (2) mailing address, (3) phone number, (4) email address, (5) reason for return, and (6) proof of purchase or order number, and  (7) specify on the note whether you are requesting a refund or replacement. Write the RMA on the outside of the package.Send the product to the following return address:Breathe Pure Air PurifierTristar Products500 Returns RoadWallingford, CT 06495If the replacement or refund request has not been acknowledged after two weeks, please contact Customer Service at 973-287-5162.RefundRefunds requested within the money-back guarantee timeframe will be issued to the payment method used at purchase if the item was purchased directly from Tristar. If the item was purchased from an authorized retailer, proof of purchase is required, and a check will be issued for the item and sales tax amount. Processing and handling fees are non-refundable.

Technical Specifications

Model: LS-80Rated voltage/frequency: 100-240V – SOHz , or USB DCSVRated power: 5 WSize: 148 x 100 x 80mmNegative ion output: Sx106 n/cm3Effective area: 100-150 sq.ftNet weight: 289g

report this ad

This product has been manufactured to the highest standards.Should you have any questions, our friendly customer service staff is here to help you.Visit us at www.TristarCares.com,email us at[email protected],or call us at 973-287-5162Distributed by Tristar Products, Inc.Fairfield, NJ 07004© 2020 Tristar Products, Inc.Made in ChinaBP_AirPurifier_IB_TP_ENG_V1_200528

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by