truelife NannyWatch A15 User Manual

NannyWatch A15

Parent unit description

1. LCD screen
2.  Increase volume / Move up/ Turn on/off VOX
3. Decrease volume / Move down / Push to Talk button
4. MENU / OK / Turn lullabies on/off
5. Turn on / Back / View time
6. Wireless charging
7. Speaker
8. Microphone

Baby unit description

Charging stand description

1. Wireless connector for charging of the parent unit
2. Charging input

Installation

1. Connect the adapter to the charging input of the baby unit and connect it to a socket.
2. Place the parent unit to the charging stand and connect the stand to a socket.
3. The screen of the parent unit will show a charging icon, meaning that the battery is charging.
4. You can hang the baby unit on the wall or place it somewhere near the baby.
5. The camera head is adjustable, you can turn it in whichever direction you want.
6. Pair the devices – see the “Pairing” section.

Screen

*Note: The thermometer in the baby unit is not certified and the displayed temperature is only indicative.

Menu

Press the “Menu/OK” button to enter the menu.

Press “Move up” and “Move down” to move from one option to another and press “MENU/OK” to confirm your selection. Press “Back” to return.

Pairing*

In the Menu, confirm the “Camera” option for pairing. Confirm “Register” by pressing“Menu/Ok”. Then, hold the button at the back of the camera until the pairing is complete.*Note: The parent and baby units are paired by default and do not need to be paired again. Choose this option if you want to perform a  new pairing of the units, e.g., when the signal is constantly being lost.Alarm 

Confirm “Alarm” in the menu. Press “Move down” to move between the values and press “Move up” to change the value as  required.VOXThis enables and/or disables the VOX function, sets its sensitivity, and turns vibrations on and off. If the VOX mode is enabled,during live view, the screens are turned off after a moment of silence and the sound transmission is reduced to save battery.SettingsEnter the “Settings” to set the language, time and date, temperature units, wavelength, and screen backlight. “Settings” also includes information about the system and current Firmware.

Powering a video baby monitor via a power bank A TrueLife video monitor is primarily intended for home use and to be powered from the mains. Do not use VOX power-saving mode when using a power bank. In this mode, the electrical consumption of the camera (baby unit) is so low that some power banks might think the device is charged and turn off automatically.This will interrupt transmission.Contents of packaging– Parent unit + power adapter– Baby unit + power adapter– Charging stand– Manual

Manufacturer’s liability

A warranty for manufacturing defects is provided for TrueLife products. In case of such defects, elem6 s.r.o. is obligated to repair or replace the defective part or product with a comparable part or product at its own discretion. Transfer, change or any other unauthorized handling of the product are not covered by this warranty. This includes situations that the product is lost or damaged dueto a defect, negligence, or other product faults. The warranty does not apply to damage following from use, accident, or usual wear.Company elem6 s.r.o. does not accept any liability for any accidents, injuries, death, loss, or other claims related to or following from the use of this product. Under no circumstances shall elem6 s.r.o. be held responsible for incidental or consequential damage relatedto or following from the use of this product or any of its parts. Returning or replacement of spare parts and/or the product may besubject to transportation, handling, replacement, and/or completion fees.Typing and printing errors are reserved.

SAFE USE OF THE DEVICE:

1. Read the attached safety instructions carefully.
2. In order to correctly use the product, make sure to read the latest version of the manual – available for download at www.truelife.eu.
3.  Typing and printing errors are reserved.

report this ad

References

• 
  truelife.eu