Truke Buds S1 User Manual

Truke Buds S1

Product Description

Welcome to use truke Buds S1 True Wireless Stereo B1uetooth EarbudsThis product adopts the industry’s advanced single-chip solution, with excellent sound quality and simple operation, which will bring different surprises to your life, work and journeyYou can simply connect a single earbud to make a call or listen to the mobile phone navigation tone when you are driving or riding, so that the journey is safe and worry-free. It can also be used in pairs (stereo) to enter the wonderful world of music.


  1. Touch control button
  2. MIC1MIC23. Led indicator Red/Blue
  3. Type-C charging port
  4. Battery capacity digital display

Instructions for First Time Use

  1. Remove the protective plastic film from charging pins of the earbuds if present
  2. Remove the protective plastic from battery capacity digital display
  3. Place earbuds bock in charging case to charge for 1 hour
Pairing procedure
  1. Take out the earbuds from case at same time, both earbuds will start blinking with red and blue led. In few seconds one of the earbuds will flash red and blue light, the other one will flash blue light slowly.
  2. Turn on mobile’s Bluetooth and search for new device. Then select trUke Buds Sl, now your truke Buds 51 earbuds will be paired with mobile and ready to use

General Functions & Operations

Power on: Touch and hold the button for2seconds to turn it on, the red and blue lights flashEarbuds Pairing: 

  1. Earbuds will automatically start & pair when it is taken out from the charging Case
  2. Connected Tone is played when earbuds and mobile phone connect successful
  3. Disconnected Tone is played when earbuds and mobile phone is disconnected

Power off: Earbuds will turnoff automatically when earbuds are placed into the charging case Touch and hold the button for5 seconds to power them off, Once the earbuds are linked, powering off one earbud will power off bothOperating language:   EnglishBluetooth name: truke Buds SlPlay/Pause: Touch the earbuds buttonCall answering: Touch the earbuds buttonReject incoming call: Touchand hold the earbuds buttonfor2secondsEarbuds Remaining Battery: Earbuds Remaining Battery will be displayed on supported mobile device


  1. Unable to startCharge the earbuds for 30 minutes and take the earbuds out of the charging case and it will turn on automatically
  2. Earbuds cannot PairGo to the mobile’s Bluetooth menu and forget/disconnect the trUke Buds 51 and put the earbuds back to charging case. Then take out earbuds from charging case and connect/pair with mobile again
  3. Cannot Connect to Mobile DeviceTurn off the earbuds by putting them in charging case. Turn off Mobile Device Bluetooth function turn it on again. Take out the earbuds from case and connect
  4. The earbuds can’t be chargedMake sure earbuds are placed in case with right orientation, gently press them in place Clean the charging pin point
  5. Only one earbud is working/Both earbuds not working simultaneously/Music played on only one earbud atone timeGo to the mobile’s Bluetooth menu and forget/disconnect the truike Buds 5l and put the earbuds backto charging case. Then takeout earbuds from charging case and connect/pair with mobile again


  1. Do not use this product under high temperature, high humidity, high cold, high dust, high electromagnetic radiation and lightning environment
  2. Do not use non-original charging accessories to charge
  3. Charging time should not exceed 3 hours
  4. Recharge every 30 days when not in use for a long time
  5. Do not exceed 60 decibels when used for a long time to avoid hearing damage
  6. Do not disassemble by any unauthorized personnel, otherwise warranty will be void
  7. After the product has expired, it can be sent to a professional recycling agency. Do not discard it at will, so as not to pollute the environment

Customer Care

For any queries/ complaints, please feel free to WhatsApp us on +91-9354170767Write to us at [email protected]Mandatory Registration is required at within l0 days of purchase

[xyz-ips snippet=”download-snippet”]