tzumi Alarm Clock with Wireless Charging User Manual

tzumi Alarm Clock with Wireless Charging User Manual

Wireless Charging Alarm Clock User GuideThe wireless charging alarm clock can charge your phone and wake you up right on time as well. it features a modernly designed LED along with a wireless charging base that charges and powers your smartphones, Air Pods and other compatible devices through the night. The display brightness can be adjusted tor maximal comfort via the friendly and easy to use buttons.

Package Contents

• Alarm clock
• USB cable
• Manual

Product Overview and Function

• Easy to use settings
• LED digital display
• Wirelessly charges smartphones and other compatible devices.

Getting Started

1. Powering the Unit• Plug in the Micro USB cable into the charging port and the other end into a USB power source.

2. Setting the Clock

• Press and hold the time button tor 2 seconds until the time flashes to enter the time setting mode
• Press the time button again then press the button to switch the time from 12-hour mode to the 24-hour mode.
• Press the time button again to enter the hour setting mode
• Press the alarm button again then press the + or – button to adjust the hours.
• Press the time button again to enter the minutes setting mode
• Press the + or – buttons to adjust the minutes
• Press the time button again to confirm the time

3. Adjusting the Display Brightness• Press and hold the button to cycle thru the 3 display brightness levels

3. Adjusting the Display Brightness

• Press and hold the button to cycle thru the 3 display brightness levels
• Press the alarm button again then press the + or – button to adjust the hours.
• Press the alarm button age in to enter the minutes setting mode
• Press the + or – buttons to adjust the minutes
• Press the alarm button again to confirm the alarm time
• Press the alarm button twice to turn the alarm ON or OFFNote: When the alarm rings, press the alarm button to turn the alarm OFF or press any other button to snooze the alarm for 5 minutes.

Wireless Charging

• The charging pad supports Qi compatible phones, Air Pods and other devices
• When charging a device, the charging indicator light will light-up.
• if there is a foreign object on the wireless charging pad the status light will blink repeatedly

Specifications

Size: 14.15 x 12.67 x 5.45 cmWeight: 156gVoltage: 9V 2AMax Power: 10WWireless Charging: 10WMateria: ABS + PC

Safeguards

Please note improper use of this unit can result in potential electric shock or fire hazard. Please read and follow the safety instructions carefully before installation and use.

• This unit should not be used near water far example near a bathtub, kitchen sink, laundry tub or wet basement. it poses serious risk of electric shock.
• The unit should be kept away from heat sources such as radiators, heat registers or other appliances that emit heat.
• The unit should only be connected to a power supply described in the operating instructions.
• The unit should be serviced by a qualified service personnel if it is damaged or does not operate normally. Do not attempt to fix it on your own.
• To reduce the risk of electric shock do not expose this product to rain or moisture

tzumi” Distributed by tzumi Inc. NY, NY, 10016. 0 Copyright 2019 tzumi. AII Rights Reserved. Made In China.AII pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.Other trademarks and Tracie names on this package are those of their respective owners.