ULINE Deluxe Mesh Chair
TOOL NEEDED
PARTS
ASSEMBLY
- Insert casters into legs of five-star base. Turn base upright. Insert gas lift into center of base. (See Figure 1)
- Align armrest with holes on bottom of seat cushion. Use one 1/4 x 1/” screw (12) and two 1/4 x 1/” screws (13) to attach. Repeat on opposite side. (See Figure 2)NOTE: Use Allen wrench to tighten all screws
- Align mechanism with holes on bottom of seat cushion with tension knob facing the front of seat. Use four 5/16 x 1″ screws (11) to attach. (See Figure 3)
- Attach hand grips to levers on mechanism. (See Figure 3)
- Position back support in slot between bottom of seat cushion and mechanism holes and use three 5/16 x 3/4″ screws (10) to attach back support to mechanism. (See Figure 4)
- Slowly lower chair assembly onto the gas lift. Press down on seat cushion to secure in place. (See Figure 5)
[xyz-ips snippet=”download-snippet”]