ULINE H-1978, H-8532, H-8577 Z-Rack Installation Guide

H-1978, H-8532 H-8577Z-RACK1-800-295-5510uline.com

TOOLS INCLUDED

PARTS

ASSEMBLY

1. Remove the included washers and bolts from the frames, using the included 1/4″ Allen wrench. (See Figure 1)
2. Slide the frame and the frame crossbar together, aligning the bolt holes. (See Figure 2)
3. Insert bolts into aligned bolt holes, placing the washers between the frame and bolt. Tighten using included 1/4″ Allen wrench. (See Figure 3)
4. Place caster bumpers on casters with concave side toward the caster.
5. Align and insert casters with rubber bumpers. Tighten the nut on the opposite side using the included wrench. (See Figure 4)
6. Insert the vertical support bars into the frame. (See Figure 5)
7. Slide horizontal hang bar on the top of the vertical support bars and lock into place. (See Figure 6)

0421 IH-1978