ULINE H-2268 SANITAIRE Upright Vacuum Instructions

ULINE H-2268 SANITAIRE Upright Vacuum Instructions

ROUTINE MAINTENANCE

DAILY

1. Check Dust Bag – Before each use, check the disposable dust bag and empty if three-quarters full or more.
2. Belt Condition – Check the belt for signs of wear. Change the belt when it is loose or has cuts or cracks. Refer to the diagram on the underside of the base for proper installation of belt and brush roll.
3. Supply Cord and Plug – Check supply cord and plug for any cuts or damage. If damaged, have the supply cord and plug assembly replaced by a qualified Sanitaire repair center.
4. Motor – If there are unusual sounds or if poor performance occurs, the motor should be inspected immediately by a qualified Sanitaire repair center.

WEEKLY

1. Cloth Dust Bag – Inspect the dust bag assembly for any unusual wear. Replace bent clips, stretched springs or a worn bag with genuine Sanitaire replacement parts.
2. Brush roll Bristle Strips – Check the bristles for wear once a week. The bristle strips should be replaced when the bristles are less than 1/4 inch in length.
3. Brush Roll Condition – Check for and remove any loose material such as string or hair wrapped around the brush roll.
4. Filter – Check the washable, reusable HEPA filter for clogs and clean or rinse as needed.

MONTHLY

1. Cleaning – Inspect and clean the vacuum, including the fan chamber and under the hood.
2. Electrical – Inspect the cord assembly for wear and check for proper handle assembly.
3. Handle – Check the handle assembly for tightness, and replace handle bolts if missing.
4. Motor – A qualified Sanitaire repair center should make a routine check of the motor every 6 months. Inspect the motor immediately if there are any unusual sounds or if poor performance occurs.
5. Filter – Check the washable, reusable HEPA filter for clogs and clean or rinse as needed.

Contact us

Telephone: 1-800-295-5510Website: uline.com