ULINE H-3454 Stainless Steel Wall Mount Sanitary Napkin Receptacle
TOOLS NEEDED
|
|
|
|
|
|
Drill
Drill Bit
Phillips Screwdriver
Level
Tape MeasureMOUNTING INSTRUCTIONS
NOTE: Mounting hardware is not included with this item. Ensure that proper mounting hardware is used for appropriate wall composition. NOTE: Recommended mounting height is approximately equal to toilet tissue dispenser.
- Hold up receptacle to desired location and mark two holes on wall where screws will be inserted. (See Figure 1)
- Drill into wall at two marked locations with appropriate-sized drill bit. Insert wall anchors if necessary.
- Hold receptacle over previously drilled holes and insert screws.
LINER LOADING INSTRUCTIONS
- Open top of receptacle.
- Place an open liner (S-15960) down into receptacle.
LINER REMOVAL INSTRUCTIONS
- Open top of receptacle. (See Figure 2)
- Carefully pinch both sides of the liner and pull up.Dispose of liner into a trash container.
1-800-295-5510uline.ca
[xyz-ips snippet=”download-snippet”]