ULINE H-441, H-494, H-855, H-1168 Back Support Belt Instruction Manual

ULINE H-441, H-494, H-855, H-1168 Back Support Belt Instruction Manual

INSTRUCTIONS

PROPER FIT

1. Center the belt in the small of back and pull the inside belt layer over the abdomen, overlapping from left to (See Figure 1)                      , Figure 3
2. Grip both ends of the outer belt (See Figure 2)                          Figure 3
3. Pull outer belt over the abdomen, overlapping from left to The belt should feel snug and comfortable around waist. (See Figure 3),Figure 4NOTE: The belt should not restrict normal breathing, yet must be tight enough to provide adequate pressure. The suspenders are attached to the belt with break- away clips and can be detached in an emergency.

SAFE LIFTING

CAUTION! Do not lift more weight than can be handled without the use of a back support belt. The use of a back support belt does not ensure more weight can be lifted

1. Size up the load weight before attempting to
2. Establish a firm footing to ensure proper balance and a stable lifting
3. Stand with feet shoulder-width apart with one foot slightly Keep back straight, upright and perpendicular to the ground.
4. Always bend at the Slowly lower, always keeping back straight.
5. Tighten abdominal muscles and lift, letting legs do the
6. Keep load close to If necessary, turn with feet first and

SIZE SPECIFICATIONS

Read More About This Manual & Download PDF: