ULINE H-6546 Industrial LED Magnifier User Guide

ULINE H-6546 Industrial LED Magnifier

INSTALLATION

1. Locate and remove clamp from packaging.
2. Use screw mechanism to open clamp to the thickness of the desired mounting surface.
3. Slide clamp onto desired mounting surface and tighten screw mechanism. (See Figure 1)NOTE: Clamp must be tightened completely before attaching lamp.
4. Remove lamp from packaging.CAUTION! Use both hands to hold lamp arms closed when removing packaging. Open arms slowly and carefully.
5. Lower stem of lamp into hole in clamp. (See Figure 2)
6. Insert plug into properly rated 120V outlet.
7. Insert other end of plug into base of lamp.(See Figure 3)

OPERATION

1. Adjust magnifier head to desired position. Tighten adjustment knob to secure head tilt. To lock side to side movement, use 4 mm Allen wrench to tighten bolt on head. (See Figure 4)
2. Lift the magnifier cover and use control pad to operate LED lights.

1-800-295-5510uline.com