ULINE H-6651 Light Duty Electric Pressure
Washer Installation Guide
PARTS
ASSEMBLY
1. Slide gun holder on side. (See Figure 1)
2. Snap in place and screw in nozzle tray. (See Figure 2)
3. Swivel bottom cord hook right or left to easily remove the power cord. (See Figure 3)
4. Attach high pressure hose to power washer. (See Figure 4)
5. Attach high pressure hose to spray gun. (See Figure 5)
6. Push on right side of spray gun to lock trigger. Push on the left side of the spray gun to unlock trigger. (See Figure 6)
NOTE: Always make sure the spray gun is locked when not in use.
7. To connect nozzle to spray gun, insert nozzle into spray gun, push together and at the same time twist clockwise to lock in place. To remove, push together and twist counterclockwise then pull apart. (See Figure 7)
8. The high/low nozzle has two positions:IN position For high pressure spray. Designed for cleaning and allowing spray to be adjusted.OUT position For low pressure spray for detergent function. Spray needs to be set with fan blades in the “pencil stream” position to assure the detergent is not restricted. (See Figures 8-9)
9. Fill detergent tank. (See Figure 10)
NOTE: Do NOT use thick detergent, as it can clog the power washer.
10. Pull clear siphoning tube through cap so it will draw detergent from the bottom of the tank. (See Figure 11)
11. Clear quick connect adapter (QCA) attaches to the power washer. (See Figure 12)
12. Attach garden hose adapter (GHA) to the end of the garden hose. (See Figure 13)
13. Snap the GHA onto the QCA. To remove, pull back on the collar and pull off. (See Figure 14)
14. Clear QCA attaches to power washer. GHA attaches to garden hose. (See Figure 15)
15. Plug machine into a grounded outlet; push RESET button. (See Figure 16)
16. Turn on water. (See Figure 17)
17. Switch to OFF or ON position. (See Figure 18)
REPLACEMENT PARTS
1-800-295-5510uline.com
[xyz-ips snippet=”download-snippet”]