ULINE H-7899 36″ Corrugated Wrap Dispenser Installation Guide

ULINE H-7899 36″ Corrugated Wrap Dispenser

TOOLS NEEDED

PARTS

PARTS DIAGRAM

ASSEMBLY

1. Remove and unpack all pieces from the carton.
2. Attach base tube to base by inserting base tube through under side of base and attach using two M5 x 20 hex socket head screws. (See Figure 1)
3. Lay base down with corner plates touching floor.
4. Attach two non-locking and two locking casters to corner plates using one M10 hex nut, one M10 spring washer and one M10 washer per caster. (See Figure 2)NOTE: Lock casters for the remainder of the assembly process.
5. Align holes on corner plates of upright frame with holes on base. Use three M10 x 70 hex bolts, three M10 hex nuts, three M10 spring washers and three M10 washers to attach each corner plate of upright frame to base. (See Figure 3)
6. Attach support bar to top center of upright frame using one M10 x 110 hex bolt, one M10 wing nut, one M10 spring washer and one M10 washer. (See Figure 4)
7. Attach white ring on top of round base plate using two M5 nyloc nuts and two M5 x 15 hex socket head screws. (See Figure 5)
8. Screw round cap onto top of core support bar. (See Figure 6)
9. Insert core support bar into hole on support bar. (See Figure 7)
10. Slide round base plate on to rounded tube-shaped upright on base (white ring up). (See Figure 7)

PARTS FOR OPTIONAL TABLETOP CUTTER

ASSEMBLY OF OPTIONAL TABLETOP CUTTER

1. Remove tabletop cutter from carton.
2. Line up mounting holes on ends of tabletop cutter to holes on upright frame and attach using two M5 x 60 hex bolts, two M5 hex nuts, two M5 spring washers and two M5 washers. (See Figure 8)

1-800-295-5510www.uline.com

References

• 
  ULINE – Shipping Boxes, Shipping Supplies, Packaging Materials, Packing Supplies
• 
  Uline.ca – Shipping Boxes, Shipping Supplies, Packaging Materials, Packing Supplies
• 
  Uline.mx – Cajas para Envíos, Materiales de Empaque, Materiales de Empaque, Suministros para Empaque