ULINE H-8539 Benchtop Rotabin User Guide

Table of Contents

H-85391-800-295-5510BENCHTOP ROTABIN®uline.com



  1. Slide the top of the stem through the bottom of the base plate. Push base plate down until it is flush with stem plate. Align holes in base plate with holes in stem plate and secure base plate to stem plate with three bolts and three keps nuts. (See Figure 1)
  2. Set unit upright and insert a pin through the bottom hole in the stem closest to the base plate. Position pin so that equal distance of pin is on both sides of the stem. (See Figure 2)
  3. Slide washer down the stem until it is resting on the pin. Slide bearing down stem until it is resting on washer. Slide shelf down stem until it is resting on bearing, washer and pin. (See Figure 3) NOTE: Bearing, washer, and pin should sit in a recessed circle of the underside of the shelf.
  4. Repeat steps 2 and 3 for the remaining shelves.

[xyz-ips snippet=”download-snippet”]