ULINE Service Cart User Guide

ULINE Service Cart

TOOLS NEEDED

PARTS

ASSEMBLY

1. Insert caster sockets into each corner of shelf and tap in with rubber mallet until secure. (See Figure 1)
2. Tap casters into caster sockets using rubber mallet. (See Figure 2)
3. Tap supports onto bottom shelf using rubber mallet. (See Figure 3)
4. Tap middle shelf onto supports using rubber mallet. (See Figure 4)CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.
5. Tap supports onto middle shelf using rubber mallet. (See Figure 5)
6. Tap handles onto top shelf using rubber mallet.Insert screws into underside of top shelf and secure handles using Phillips screwdriver. (See Figure 6)
7. Tap top shelf onto supports using rubber mallet. (See Figure 7)CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.
8. Ensure that all components are fully seated with rubber mallet.