ULINE Single Sided Grid Bike Rack User Guide
TOOL NEEDED
- 9/16″ Wrench
PARTS
- Leg x 2
- Grid Section x 1
- Pole x 1
- Locknut x 6
- Bolt x 6
ASSEMBLY
- Insert bolt upward through hole in leg and pole. Fasten loosely with locknut. Repeat by attaching other leg to pole. (See Inset A)
- Insert bolt through hole at the top of the leg and end of grid. (See Inset B) NOTE: Grid can only be positioned one way for mounting. The holes on top are drilled diagonally through the tube at a slight downward angle.
- Fasten loosely with locknut. Repeat by attaching other leg to grid.
- Align bottom holes of grid with middle hole of legs. Insert bolt upward and fasten loosely with locknut. Repeat by attaching other leg to grid. (See Inset C)
- Complete assembly by tightening all bolts.
NOTE: Grid can only be positioned one way for mounting. The holes on top are drilled diagonally through the tube at a slight downward angle.
Contact Us
Phone: 1-800-295-5510Web: uline.com
[xyz-ips snippet=”download-snippet”]