ULTRA Top Wet Grinder, Multicolour User Guide

ULTRA Top Wet Grinder, Multicolour

  • MIXER GRINDERS
  • WET GRINDERS
  • PRESSURE COOKERS

Dear Customer,We’re delighted to welcome you to the Ultra family of millions of happy customers worldwide.You’ve made a smart and informed decision to invest in a perfectly made Ultra. Ultra products are inventive and aesthetically superb with a combination of good quality, precision and durability to help prepare the tastiest and healthiest meal.Ultra assures you of trouble-free performance for years.However, in the unlikely event of any operational problem, we would be more than happy to assist you.

PRODUCT INFORMATION

S.NO.

Features  

1

Form Table Top

2

Capacity 1.25L

3

Motor Wattage 85 watts

4

Voltage 230V, 50Hz

5

Grinding Stones Conical

6

Drum AISI-304 Rust-Resistant Food Grade Stainless Steel

7

Shell ABS

8

Drum Shape Cylindrical

9

Multi-Utility Drum Yes

10

Power Surge Protector Yes

11

Shock Proof Yes

12

Stone Assembly weight 1.7 KG

13

Warranty 5 Years

14

Net Weight 8.8 kg

15

Product Dimension (mm) 400 x 230 x 315

16

Drum Size (mm) ø190 x 175

17

Motor Speed (Rated without Load) 1350 RPM

18

Drum Speed (with Load) 155 – 160 RPM

19

Box Contents Grinder Unit, User Guide and Batter Cleaner

Recommended Measure and Grinding Time *

Grinding Medium

Load Condition Measurements before soaking Soaking Time in Hrs

Water to be added

Rice (Raw / Boiled) Minimum 106 gms 4 100 ml
Maximum 781 gms 4

780 ml

Dhal Minimum 41 gms 2 80 ml
Maximum 195 gms 2

390 ml

1 cup (200 ml) – 180 gms of idly rice1 cup (200 ml) – 180 gms of black gramGrinding InstructionsRice and Dhal should be ground separately.For better grinding result, do grind rice first and dhal next.Do not use cut pieces of coconut; instead use only shredded coconut for grinding.*Results under lab test conditions and may vary with actuals

HOW TO OPERATE YOUR ULTRA DURA TABLE TOP GRINDER

Sequence of Operation
  1. Wash and clean the drum and roller stone assembly
  2. Place the drum on pulley coupler. Gently rotate till the drum fixes itself
  3. Place the roller assembly in the drum in position as indicated above the drum
  4. Close the arm and press gently to lock automatically
  5. Take a cup of water and pour it in to the drum
  6. Press the switch downwards to turn on the grinder
  7. Add the grinding medium in small quantities with adequate water and close the drum with hatch
  8. When required consistency is achieved, switch off the grinder
  9. Remove the hatch, hold the arm and press lock to release, then swing the arm upwards and rest it suitably
  10. Remove the roller stone assembly, place it on the batter cleaner as shown and rotate the stones to wipe down the batter into the drum
  11. Remove the drum and use required amount of batter. Store the rest in your refrigerator

Note: For pulse/cereals, always add in small quantities to ensure even grinding

MAKE YOUR ULTRA DURA WORK LONGER

DOs
  • Make sure you keep your Ultra Wet grinder clean and dry, always
  • When not in use, disconnect the electric cord from the mains
  • For best results and trouble-free performance, use Ultra Wet grinder only as specified in this User Guide
  • Be alert and cautious while operating in the presence of children and physically challenged persons
  • Always keep your Ultra Wet grinder away from heat sources
  • Lift the appliance at its base
  • Clean the drum and roller assembly thoroughly after every use
  • Ensure that the grinder is in unlocked position while not in use
  • Keep the wiper position facing the motor while grinding(Please refer diagram printed on Arm)
DON’Ts
  • Do not run the grinder empty for more than a minute
  • Do not use any other attachments. Use only those recommended by us
  • Do not put your hand into the drum while grinding
  • Do not unlock the arm while in operation
  • Do not insert sharp objects into the slits. This would damage the parts inside
  • Do not lubricate any parts with oil/grease
  • Do not keep the drum upside down after washing
  • Do not attempt to repair the grinder yourself. If there’s any fault, contact Customer Care

EXPLODED VIEW OF ULTRA DURA

SL. No. Part Name

1

Base Frame

2

Bottom Shoe

3

Slotted CSK – M5 x 12

4

Cheese Head Screw M4 x 15

5

Cheese Head screw M4 x 20

6

Brg. Hsg Plate

7

Deep Groove Ball Bearing 6202

8

Bearing Spacer

9

Poly ‘V’ Belt – 4PJ745

10

Driven Pulley – (Poly ‘V’)

11

Driven Pulley

12

Hex Socket Grub Screw M5 x 6

13

Washer Gromment ID5.5 x OD17 x T1

14

Gromment Motor Mount

15

Hexagon Nut M4

16

Spring Washer M4

17

MS Washer 4.5 x 12 x 1

18

Motor Mounting Plate

19

Bush – Motor Mounting Plate

20

Hexagon Nut M5

21

Capacitor 5 MFD

22

Ultra Motor 230V, 50Hz, 85W

23

Motor Fan

24

Wago 3 Way Connector Assy.

25

Wire Cord – 230 V

26

Switch -230 V

27

Cheese Head Screw M4 x 15

28

Hexagon Nut M3

29

Cheese Head Screw M4 x 15

30

Ms Washer 4.5 x 12 x 1

31

Cover – Switch Knob

32

Shell Assy

33

Stopper Arm Channel

34

Lock Spring

35

Lock

36

Shell Top Cover

37

Cheese Head Screw M5 x 8

38

Channel Bottom Cover

39

Slotted CSK Head Screw M5 x 8

40

Housing

41

Sleeve

42

Main Spring

43

Arm Channel

44

Hinge with Insert

45

M.S. Washer ID 8.5 x 0D 14.5 x T 0.5

46

Rubber Washer ID 8.5 x 0D 15.5 x T 0.3

47

Disc Spring 12.5 x 6.2 x 0.7

48

SS Hexagon Lock Nut M6

49

Split Pin 1.4 x 15

50

Channel Top Cover

51

Hatch

52

Pin – Hinge

53

Plug Hinge Pin

54

Collar Pad

55

Adaptor

56

Flate Stone

57

Drum

58

Wiper Assy

59

Hexagon Lock Nut M8

60

Roller Lock Screw

61

Taper Roller Assy – I

62

Roller Lock Screw

63

Taper Roller Assy – II

Additional Attachments (Optional)*

Atta Kneader

Coconut Scraper

Visit www.elgiultra.com to watch the demo video

*Attachments have to be purchased separately at additional cost

TROUBLESHOOTING CHART

PROBLEM REASON SOLUTION
Grinder does not run No power supply Check mains
Loose connection of wire cord Contact Ultra Customer Care
Grinder starts but drum stops suddenly Overloading of medium Remove medium and add in small quantities
Low belt tension Contact Ultra Customer Care
Insufficient water Add water as required
Grinder is noisy Incorrect wiper position Check and correct the wiper position as printed on Arm lid
Takes more time to grind Excess quantity, insufficient soaking time Reduce quantity or check manual for correct grinding measures
Incorrect wiper position Check and correct the wiper position as printed on Arm lid
Low voltage Operate at 230 V Ac 50 Hz
Low belt tension Contact Ultra Customer Care
Grinder overheating Motor housing air vents blocked Use a dry brush to clean air vents
External heat source Keep the grinder away from external heat sources
Vibration Uneven platform Place the grinder on stable and horizontal platform
 

Grinder / Drum smells

Motor burnt Contact Ultra Customer Care
Drum / Roller Holder Assembly not cleaned well Clean the drum / roller holder assembly
Grinder stops automatically when it is switched on Faulty switch Contact Ultra Customer Care
Arm does not lock Roller assembly not cleaned well Unscrew roller and clean under running water
Roller not rotating Roller not cleaned properly after use Unscrew roller and clean under running water
Excessive loading/insufficient water Remove excess medium
Roller stuck on pin Unscrew roller pin and clean

In case of abnormal operating conditions, contact Ultra Care Centre

Warranty- Terms & Conditions

Elgi Ultra Industries Limited (hereinafter referred to as “the Company”) guarantees this product for normal home use against defects in materials or workmanship for a period of 5 years from the date of original retail purchase. During the said period, the Company has the option to either repair or replace parts free of charge, if this product is returned personally or sent through prepaid courier to our Ultra Care Centres, along with proof of purchase and guarantee card duly filled in by the retailer.

The decision of the Ultra Care Centres in determining the cause of failure andrepairs required to be carried out will be final and binding under this 5 years warranty and cannot be canvassed either by dealer or the retail purchaser on any ground whatsoever. The warrantor shall not be liable for any transportation cost or any damage due to or during transit of the product either way. Repaired units under warranty will be returned to the customer at his/her risk and on “to pay” freight basis

This Warranty shall NOT apply:

  • For wear and tear to the product
  • For grinder hatch
  • Involvement in an accident
  • If the product is purchased from any unauthorised source
  • If repairs or product modifications and/or alterations have been carried out by unauthorised service organisations or persons
  • If the product is being used for commercial purposes
  • If the defect is caused by abuse or misuse of the product or by environmental conditions that are not in conformance to the recommended operations of the product
  • If the defect is caused by its connection to peripherals, additionalequipment or accessories other than those recommended by Ultra
  • If the warranty card and/or a purchase bill is not produced at the time of repair

In no event will the Company be responsible for any loss or damage, directly by or consequential to, careless, negligent handling or misuse of this product.

This Warranty is expressly in lieu of all other warranties expressed or implied (statutory or otherwise) and of all other obligations or liabilities on the Company’s part. No person, agent, distributor, dealer, service centre or company is authorised to change, modify or extend the terms of this Warranty in any manner whatsoever.

The Company’s liability under this Warranty is restricted to only repair of theproduct and does not involve any replacement, monetary payment or damages. Any doubt/disputed claim under this Warranty shall be subject to arbitration by an Arbitrator appointed only by the Company. The arbitration shall be at Coimbatore only

Please Note:

  • The Warranty is applicable only for purchase made through authorised dealers in the country of purchase
  • The above Warranty is applicable only for materials/components and not for service/labour charges incurred in rectification/repair

CHARGES APPLICABLE

Service Period

Spares

Service charges (Ultra service centre/doorstep)

Doorstep visiting charges

Up to 1 year within warranty

Free

Free

Free

After 1 year within warranty

Free

Free

`100

Out of warranty At Cost `250

`100

Above charges are applicable only in India and is subject to change without any prior notice. Please check with Ultra Customer Care for prevailing charges.Doorstep service is applicable only in India.

FOR YOUR KIND ATTENTION

  • Please read all instructions and warning before using this product. Keep this user guide, sales receipt and warranty for future reference and use.
  • In case of any mechanical faults, call Ultra Customer Care. Do not attempt to repair it yourself
  • This user guide provides important information on proper operation and maintenance. Every effort has been made to provide the details with as much accuracy as possible. We reserve the right to change or upgrade the product or any part thereof without prior notice.
  • The instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. We urge you to exercise common sense, caution and care when setting or using this product.
  • When unpacking check to make sure all parts listed is included. If you find anything missing or broken or damaged, kindly call Customer Service.
  • The design, specifications and price are subject to change without prior notice.

/ultraappliancess

  /ultraappliances

/ultra_appliances

The Ultra social media broadcasts are full of recipes and tips on healthy, delicious food. From daily updates to interesting engagements on special days, our content is something you mustn’t miss. What’s more, there are also lots of contests and exciting prizes to look forward to!

ELGI ULTRA INDUSTRIES LIMITED

No. 1435 (PART), India House, Trichy Road, Coimbatore- 641 018, Tamil Nadu, India. 0422 2304141 0422 2301377

www.elgiultra.com

Customer Care

Toll Free No: 1800 102 2040

[email protected]

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by