UniFi 1080p Indoor Outdoor IP Camera Infrared Optical Zoom User Guide

UniFi 1080p Indoor Outdoor IP Camera Infrared Optical Zoom

Installation Requirements

  • Pole-mounting: Two metal straps / hose clamps (not included)
  • Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
  • Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP, one near the camera and the other at the entry point to the building. The ETH-SP will absorb power surges and safely discharge them into the ground

Hardware Overview

Ethernet Port

10/100 RJ45 port connects to an 802.3af/802.3at or 24V Passive PoE switch for PoE power and data.

Reset Button

To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is powered on.

Hardware Installation Wall/Ceiling Mount

 

Pole Mount

Connecting Power

The UVC G3 Pro supports 802.3af, 802.3at, and 24V Passive PoE and can be powered by any 802.3af/802.3at or 24V Passive PoE compliant switch, such as a UniFi PoE Switch. Connect the Ethernet cable from the camera directly to a PoE port on the switch.

Setting Up UniFi Protect via App

Download and install the UniFi Protect app to configure the UVC-G3-PRO.

Launch the UniFi Protect app and follow the on-screen instructions to complete setup.

Adjusting the Camera View

Specifications

UVC-G3-PRODimensions (Without Mounting Plate) Ø 86 x 153 mm (Ø 3.39 x 6.02″)Weight (Without Mounting Plate) 700 g (1.54 lb)Enclosure UV Stabilized Polycarbonate and Die-Cast AluminumNetworking Interface (1) 10/100 Ethernet PortSensor Sony IMX290, 1/2.8″Lens 3-9 mm, f/1.2-f/2.1 Powered Zoom LensField of ViewWide 108° (H), 58° (V), 125° (D)Tele 37° (H), 20° (V), 43° (D)Night Mode IR LEDs with Mechanical IR Cut FilterVideo Compression H.264Resolution 1080p Full HD (1920 x 1080)Maximum Frame Rate 30 FPSImage Settings Flip, Brightness, Contrast, WDR, Hue, Infrared, Sharpness, Saturation, Denoise, 50/60 Hz Flicker ReductionManagement InterfaceManaged Mode UniFi ProtectStandalone Mode Camera Integrated Web UIMicrophone YesMax. Power Consumption 12.5WPower Method IEEE 802.3af/at Type 2 PoE or 24V Passive PoEPower Supply 802.3af/802.3at or 24V Passive PoE SwitchButtons Factory Reset ButtonMounting Wall/Ceiling (Kits Included) Pole (Bracket Included)Operating Temperature -20 to 50° C -4 to 122° FOperating Humidity 0 to 90% NoncondensingWeatherproofing IP67

Safety Notices

  1. Read, follow, and keep these instructions.
  2. Heed all warnings.
  3. Only use attachments/accessories specified by the manufacturer.

WARNING: Hot surface. Do not touch.WARNING: Do not use this product in location that can be submerged by water.WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning

Electrical Safety Information
  1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
  2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,