UNIQ ACCESSORY 8719273159026 Funky Wireless Speaker User Guide

ACCESSORYUNIQfunkyWireless SpeakerUSER GUIDE

For correctly operating, please read this User Guide carefully before using it. Any content revise of the manual won’t declare again and we are not responsible for consequences caused by fault or oversight of this manual.

Features

1. 2.0CH charming Boombox of RGB Lighting;
2. Output very clear sound and dynamic sound effects;
3. Wireless version 5.0, wireless stream music from any Wireless-enabled device such as your mobile phone ;
4. Secure simple pairing for user-friendly operating;
5. 10 meters operating range(without obstacles);
6. With USB and TF card supporting;
7. With FM radio;
8. With Line-in function(AUX-IN),suitable for PC,MID,TV and other audio device;
9. With TWS function,1 Wireless connection to 2 same speakers at the same time, enjoy the stereo effect;
10. Built-in lithium rechargeable battery 3000mAh;
11. With handle, easy to take out.

Specification

Control Panel

Bluetooth function

1. Short press the “Power button” to open the power supply, The Power button turns blue and twinkles quickly, then enter Wireless mode and make a tone “Wireless Device Ready To Pair”.
2. Activate the Wireless of the mobile phone and search for the device name “UNIQFunky” then connect it. The power button stops twinkling and makes a tone “Wireless Device Connected Successfully once connected.
3. Play the music from your mobile phone and enjoy.
4. Short Press the “Forward” or “Backward” button on the device or on Mobile phones to select songs you like.
5. Short Press the “Play/Pause” button on the device or on Mobile phones to Play/Pause the music.
6. Long press the “Forward” or “Backward” button to adjust volume up and down. Or adjust the mobile phones’ volume.
7. Long press the “Play/Pause” button to activate the Mobile phone voice control function SIRI/GOOGLE ASSISTANT;

FM Radio

1. Under FM radio state, the audio cable provided treats as an antenna. Please Insert the Audio Cable to get the best FM signal before using it.
2. Short press the “Power “button to open the power supply, press the “M” button, the speaker will prompt “The Radio Mode”  when entering FM state.
3. Under playing mode, short press the “Play/Pause” button to auto search the FM Channel and store it automatically.
4. Press the “Forward” or “Backward” button to change the stored FM channel.

AUX-IN

1. For other compatible music devices or your MP3/MP4 players, use the supplied Audio cable to connect from the device’s  “Line Out” to the “Aux-In” of this device. Then press the “M” button, the speaker will prompt “Aux Input Mode”, then Enjoy…
2. When using an external device, all functions can be controlled by the external device.

TWS Function

1. Turn on two identical speakers you want to pair, please noted they must be the same BT paring name, both under BT mode.  Only need to set one of the two units;
2. Press the “TWS” button, the speaker will make a tone “di” to start to pair, it will make “di” 3 times and the TWS button will  keep lighting after paired successfully;
3. Make a Wireless connection with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effects.
4. When you want to exit the TWS mode, press the “TWS” button (of the unit you set at the beginning) again to exit the TWS function.

Remarks

1. When Wireless connection with iPhone mobile, there will be a battery icon indicating the speaker battery volume on your iPhone.
2. Short Press the “M” button to switch the different modes, the order is Wireless, USB disk, SD card, FM radio, and AUX-IN.
3. When the speaker is Wireless connected with one mobile device, the user can long-press the TWS button to disconnect the  previous device, then make Wireless connection with another mobile device;
4. The default volume is at 50% Speaker of max volume;
5. Long press the “M” button to turn the RGB on/off;
6. When the battery voltage is low, the speaker will prompt “Battery Is Low, Please Recharge In Time”;
7. Long press the “Power button” to turn off the power, while without use.

how to charge

1. The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this device, and we are not responsible for any damage caused by using another charger.
2. Power off the unit, put the provided charge cable into the charging slot of unit, connect the other end to PC or another charger with 5V output.
3. Charge time should be about 4.5 hours. The light is red while charging, and the indicator light will switch off when fully charged. (When playing music during charging, please put the volume to the middle, because for some music with heavy bass, the charger  may not be able to afford the high current temporarily under the maximum volume.)
4. In order to prolong the life of the battery, please do not charge for more than 8 hours.

Accessories

Adapter, charging cable, audio cable, USER GUIDE

For more information about UNIQberlin (EAN: 8719273158005), please contact UNIQ Accessory using the following contact information:

Model: UNIQfunkyEAN: 8719273158005Email: [email protected]Web: uniqaccessory.comAddress: Innsbruckweg 46, 3047AH Rotterdam, The Netherlands

—————- WARRANTY FORM ——————-

report this ad

Your full name: ………………………………Reason: ………………………………………Product EAN: ……………………………Model:………………………………Purchase Date: ……………………………

References

• 
  UNIQ Accessory – You are UNIQ