use-IP ZYXEL ZyWall USG Seires User Guide
Connect the Hardware
- It is recommended that you configure the Security Gateway before using it to protect your network. Use an Ethernet cable to connect a computer to the LAN port (P4 ; USG2200 – P7) of the Security Gateway.
- Use another Ethernet cable(s) to connect the WAN port (P1, P2; USG2200 – P5, P6) to an Ethernet jack with Internet access.
- Use the included power adaptor or power cord to connect the power socket (on the rear panel) to a power outlet. Look at the front panel. The PWR light turns on. The SYS light blinks during system testing and initialization and then stays on when the system is ready.
Configuring Your Security Gateway
User Name: admin Login Password: 1234 (default)
- Launch your web browser and go to http://192.168.1.1 for Zyxel Security Gateway (the Zyxel Security Gateway automatically redirects you to https://192.168.1.1). Click Yes to proceed if you get a security alert or certificate screen. Enter admin as the user name and 1234 as the password. Click Login.
- Use an installation setup wizard to connect to the Internet and register the Zyxel Security Gateway and/or activate trial and Standard services, like IDP and Content Filter.
Important Information
Click Maintenance > Shutdown > Shutdown and wait for the device to shut down before removing the power. Go to www.zyxel.com to view this product’s documentation, latest firmware and certifications.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU ImporterZyxel Communications A/SGladsaxevej 378, 2. th. 2860 Søborg, Denmark.http://www.zyxel.dk
US ImporterZyxel Communications, Inc1130 North Miller Street Anaheim, CA 92806-2001https://www.zyxel.com
References
[xyz-ips snippet=”download-snippet”]