V-TAC LED DESK LAMP VT-7507 Installation Guide
Specifications
| Watts | 7W |
| Lumens | 400 |
| Body Color | White |
| Material | ABS+Metal |
| Adapter I/P | AC:220-240V,50Hz |
| Adapter 0/P | DC:12V, 450mA |
| CRI | >80 |
| Lifespan | 20,000 Hours |
| Working Temp | -10°C to +45°C |
| Time On/OFF | >15,000 |
| Dimension | 150x150x580mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase.The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. Th company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Replace any cracked protective shield.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
NOTES:
- With step less dimming on the base, total 7W
IMPORTANT SAFEGUARDS
- Before the first connection of the lamp ensure that voltage indicated on the rating label corresponds with the mains voltage.
- The lamp is checked on full conformity to the quality standards and safety. The manufacturer is not responsible for damage of properties and persons, caused by incorrect use of the unit.
USING YOUR DESK LAMP
- Do not use the desk lamp outdoors.
- Unpack and place the desk lamp on a flat surface.
- Plug to the power supply.
- Adjust the soft tube to desired location.
- Press the step less dimming button to use the desk lamp
CLEANING
- Before cleaning always unplug the lamp from the power supply.
- Wipe the base, shade and soft tube with damp cloth.
- Do not immerse the appliance in water. Do not use detergent or abrasives for cleaning.
Customer Support
In case of any query/issue with the product, please reach out to us at:[email protected] For More products range, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
[xyz-ips snippet=”download-snippet”]