V-TAC VT-1014 LED Rechargeable Lamp Installation Guide

WEEE Number: 80133970

Matt Silver/ White	Matt Gold/ White	Matt Black/Black
SKU: 7098	SKU: 7099	SKU: 8500

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

1. Please make sure to turn off the power before starting the installation
2. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.This marking indicates that this product should not be disposed of with other household wastes.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected] FOR MORE PRODUCTS RANGE,INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

INSTALLATION INSTRUCTION

PACKAGE CONTENT

FEATURES

1. Touch control, Three steps dimming, and Three modes for CCT.
2. Using advanced LED technology, soft light without dazzle and designed with anti-radiation and eye protection.
3. Memory function for brightness and temperature.
4. Sleek and stylish folding design rechargeable table lamp.

OPERATION CAUTIONS:

1. surfaces, and do not use it inflammable or humid environment to avoid the breakdown, short circuit, etc.
2. The adapter must be under the specialized range.
3. Place the base of the table lamp on a steady base while adjusting the arm.
4. The lamp head of the table lamp can be adjusted up to a certain angle only. Be careful not to overturn the lamp head beyond the adjusting angle in order to avoid any damage to the lamp.

MAINTENANCE

1. Please clean the lamp once every two months to keep it smooth and bright.
2. Use a cleaning cloth and water to clean the dust
3. For filthy marks, please use a cleaning cloth and soapsuds.
4. Please do not clean the lamp with high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.

OPERATION GUIDE

1. Touch button mode –To switch on the lamp tap on the button as shown in fig 1. By pressing the touch button repeatedly you can switch the lightbrightness level and turn off the light. Circulation of the light pattern by using the touch button is “minimum light, medium light, maximum light, and power-off”
2. Changing color by using the touch button –Make sure the light is ON, tap on the touch button, and hold for 2 seconds for the light to change the color temperature. Circulation of the light changing pattern is “warm-light, cold-light, and natural-light”
3. When the light is on at any temperature for more than 20 seconds and if you tap on the touch button the lamp will switch off. When turning on the lamp next time, the light brightness level and temperature will be the same as the last setting.

PARTS INDICATOR

References

• 
  TAC.EU