V-TAC VT-180 LED Linear Highbay Installation Guide

V-TAC VT-180 LED Linear Highbay

TECHNICAL DATA

 Model  Watts  Lumens  BeamAngle  PF  CRI  ON/OFF Cycles  Input power  Dimension
VT-9-112 100  12000  120  >0.9  >80 >20000 AC:220-240V ,50HZ 537x130x96mm
VT-9-152 150 18000 120 >0.9  >80 >20000 AC:220-240V ,50HZ 798x130x96mm
VT-9-202 200 24000 120 >0.9   >80 >20000 AC:220-240V ,50HZ 1059x130x96mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference.If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

  1. Please make sure to turn off the power before starting the installation.
  2. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
  3. Please read through all following instructions before installing the unit.
  4. The linear highbay must be earthed.
  5. Method of attachement of the cable or cord such that any replacement can only be made by the manufacturer, his service agent or similarly qualified person.
  6. Terminal block not included. Installation must be performed by a qualified person.
  7. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  8. To be connected with waterproof cable hose.

INSTALLATION DIAGRAM

MOUNTING 1

  1. Installing the lifting ropes to the mounting surface.
  2. Installing the revolving brackets and fixing the screws into the revolving brackets.
  3. Fixing the lamp to the lifting ropes
  4. Connecting the wire to the lamp.
  5. Turning on the power to make sure the light is working.

MOUNTING 2

  1. Installing the revolving brackets and fixing the screws into the revolving brackets.
  2. Installing the Mounting Brackets to the mounting surface.
  3. Fixing the screws to the brackets
  4. Connecting the wire to the lamp.
  5. Turning on the power to make sure the light is working.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

report this ad

References

[xyz-ips snippet=”download-snippet”]

Posted

in

by

admin

Tags:

, ,