V-TAC VT-753 STAND LAMP Installation Guide

INSTALLATION DIAGRAM:STAND LAMP (VT-753)

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.!! WARNING

• ENSURE ELECTRICITY IS SWITCHED OFF BEFORE INSTALLATION.
• PLEASE READ THROUGH ALL THE FOLLOWING INSTRUCTIONS BEFORE INSTALLING THE UNIT.
• THE USER SHOULD PREPARE NECESSARY ACCESSORIES AND SPARE PARTS (NOT PROVIDED).
• INSTALLATION MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN.

	This marking indicates that this product should not be disposed of with other household wastes.
	Caution, risk of electric shock.

INSTALLATION DIAGRAM:

INSTALLATION INSTRUCTION

1.  Turn off the power.
2. Drill a hole in the ground (as per the distance shown on pic 5).
3. Dig the plastic into the hole.
4. Fixing the bracket onto the ground.
5. Open the lamp and install the bulb in the lamp.
6. Close the clamp and tighten the screws.
7. Connect supply leads with terminal brown (L) to brown, blue (N) to blue, and greenish-yellow ( ) to greenish-yellow.
8. Tighten the nuts to fix down the lamp.
9. Turn on the Power.

References

• 
  tac.eu