WEEE NUMBER: 80133970INSTALLATION INSTRUCTIONOUTDOOR WALL LAMPVT:769
TECHNICAL DATA:
| SKU No. | 7517 |
| Input Voltage | AC:220-240V, 50Hz |
| Holder | GU10 35W(MAX) |
| Protection Rating | 1P44 |
| Unit size | 95x95x335mm |
INSTALLATION DIAGRAM:
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best.The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.! WARNING
- Ensure that the power is switched off before installation.
- Install only by a certified electrician.
- Keep this manual handy for future references.
INSTALLATION INSTRUCTION
- Open the clamp and install the bulb in the lamp
- Connect the supply leads with the terminal (The box is not included).
- Fix the lamp body on the ground.
- Switch on and test.
In case of any query/issue with the product, please reach out to us at: [email protected]For More products range, inquiry please contact our distributor or nearest dealers.V-TAC EUROPE LTDBulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
[xyz-ips snippet=”download-snippet”]