VeGue VS-0650 Portable Speaker User Guide

Instruction Manual

VS-0650Portable Speaker

Troubleshooting guide

Main technical specifications

Output power————50WInput sensitivity———–550±30mVSNR——————-≥71dBFrequency response——-20Hz~20KHzPower supply————DC 15V

*Above specifications are the specifications of the sampling machine and are for reference purposes only.*Because of continuous product improvement. specifications will keep changing at any time without prior notification.

Common function description

Vol： Adjust the volumeTreble： Adjust the trebleBass： Adjust bassMic Vol： Adjust the microphone volumeEcho： Adjust EchoMic： Wired microphone input

Product features

This system can be used with PC, DVD, VCD, MP3, Electronic Piano, and any devices with audio output.The amplifying circuit is designed with high performance and high fidelity and equipped with a professional and high-quality speaker, it can make the sound field positioning clear and layered.The system voice effect is outstanding, the bass is surging and shocking, the middle tone is strong and bright, the treble is crisp and pleasant.Professional electronic frequency division circuit, so that the division point of the machine is more accurate, better effect.The use of professional design and manufacture of large capacity batteries, as well as audio power supply capacitor makes the local power reserve margin larger, more stable, better dynamic, higher SNR.

Charging instructions

When charging, connect the supplied power adapter to AC 100V-240V~ for charging. The charging time should be 4 ~ 8 hours.  After being fully charged, unplug the power supply to avoid damage to the battery due to long-term charging.Battery level indicator: There is a battery level indicator on the display. When the battery power is low, the entire power indicator icon will flash, so please charge in time. When charging, the battery indicator icon will flash. After the flashing stops, the battery should continue to charge for 1 ~ 2 hours, which can prolong the battery life.

Note: If the battery is used out, please recharge the battery within 48 hours. Do not leave the empty battery for a long time,  otherwise, the battery will be damaged.

Remote control instructions

1. Under normal circumstances, the remote control should be used within a range of about 20 feet and 30 degrees from the remote reception window.
2. When operating the remote control, point the remote control at the receiver window of the machine. There should be no obstacles between the remote control and the machine.
3. If the receiving window is in the position of strong light, the remote control may fail. In this case, please remove the machine, to avoid direct exposure to strong light.
4. Please don’t make both new and old batteries work together, and regularly check whether the remote control batteries need to be replaced.

*Image diagram, for reference only

USB/TF

Music files in USB and TF cards should be formatted as FAT32 on the computer.The order of music play is based on the file name, if the music file names areas “01,02,03” in sequence. This product will play the file “01” first.Copy MP3 or WMA music files to USB/TF cards. It is recommended to delete unnecessary files and folders to speed up card  reading and reduce card reading problems

Microphone controls and basic operation

1. Microphone on
2. Microphone off
3. Screen

Function declaration

Connection diagram

*Image diagram, for reference only

Recording in instructions

Please insert a USB or TF card first and then press RECORD into recording mode. When recording music for the first time, a new file “Voice” will be created in the card and all recordings will be saved into the file. These recording files are automatically named REC0001, REC0002, REC0003 in sequence.When recording music, press RECORD to pause it and press again to continue. Press INPUT or REC. Play to quit recording mode.Please press REC. Play into recording-play mode(automatically play the recording of the music before). Usually, the machine will play the last recording music first. Press PREV( |◄◄) or NEXT( ►►|) to select the music. Press Replay on the remote control to replay music. If you would like to replay single music or all music, please press Replay repeatedly.

Play function

report this ad

USB port: insert USB and play music.TF port: insert TF card and play music.Supports MP3, WMA, and WAV music formats, outstanding sound performance, high fax stereo design.INPUT: to switch external Audio / Bluetooth functions.►||: press to pause the music, press again to continue.|◄◄ /►►|: when playing, select the PREVIOUS/NEXT music.

Bluetooth operation

Bluetooth connection method: Turn on the speaker, press the input key on the speaker panel, and the screen will display ‘bt’.Use your phone to connect the Bluetooth of the speaker. The Bluetooth name is VS-0650.If the connection fails, please restart the device or the phone and try again.The use range of the Bluetooth is 32ft in the open area.