VELLEMAN Reflection Light Barrier User Manual

PEM10D

USER MANUAL

Introduction

To all residents of the European Union Important environmental information about this productThis symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling.  This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.If in doubt, contact your local waste disposal authorities.  Thank you for choosing EtiamPro! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.Notes: It is recommended to use this device indoors. Raindrops and condensation may influence its operation.

Overview

Refer to the illustrations on page 2 of this manual.

A – Adjustments* B – Front view
1. response time 1. beam alignment LED
2. sensing range 2. power LED

*Adjust with a small Phillips screwdriver.

C – Wiring

1 brown: power-on polarity
2 blue: power-on polarity
3 black: N.O.
4 white: COM
5 gray: N.C.

Technical Specifications

detection method retro-reflection
sensing range 10 m
input voltage 12-250 VAC/VDC ± 10 %
response time 5-10 ms
emitting element IR LED
operation indicator yellow LED (lights when beam is cut)
dimensions 20 x 39 x 63 mm
current consumption ±10 mA
output method relay output
contact current 1 A/250 VAC
illumination: lamplight < 10000 lux
illumination: sunlight < 30000 lux
connection method multicore cable
noise resistance 1500 Vpp/1 µs
housing material: case PC
housing material: lens PC
operating temperature -10 °C to +55 °C
IP rating IP44

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICEThe copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced,  translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality WarrantySince its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfill strict quality requirements and legal stipulations in the  EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organizations. If, all precautionary measures notwithstanding, problems should occur, please make an appeal to our warranty (see guarantee conditions).General Warranty Conditions Concerning Consumer Products (for EU):• All consumer products are subject to a 24month warranty on production flaws and defective material as from the original date of purchase.• Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw that occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50%  of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.• Not covered by warranty:– all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;– consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive  belts… (unlimited list);– flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;– flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six(6) months when the article is used professionally);– damage resulting from an inappropriate packing and shipping of the article;– all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.• Repairs occurring after warranty expiration are subject to shipping costs.• The above conditions are without prejudice to all commercial warranties.The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRCImported for EtiamPro by Velleman nvLegen Heirweg 33, 9890 Gavere, Belgiumwww.velleman.eu

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by