Velleman VTFC2 User Manual

Velleman VTFC2 User Manual

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of  the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

 

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

  • This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
  • Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquids on top of or close to the device.
  • Always disconnect mains power when the device is not in use or when servicing or maintenance activities are performed. Handle the power cord by the plug only.
  • Do not disassemble or open the cover. There are no userserviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
  • Caution: Device heats up during use. Never cover the device and keep the ventilation slots free from dust and obstructions at all times. The housing might heat up during usage. Keep minimum distances around the device for sufficient ventilation. Place the device on a flat, heat resistant surface. Do not place the device on carpets, fabrics…
  • Do not use the device when damage to housing or cables is noticed. Do not attempt to service the device yourself but contact an authorised dealer.
  • Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to inflammable products even when they are not in sight. Only use in properly ventilated rooms.
  • WARNING: This tool must be placed on its stand when not in use.
  • Provide for good ventilation when using the device.
  • The cutting wire is hot. Do not touch hot parts to avoid risk of skin burn!
  • Do not leave the device unattended when it is switched on.
  • Switch off the device after use. Let it cool down sufficiently before storing.
  • Always use the cutter on a heatproof and uncluttered table.
  • Only use the supplied cutting wire or a suited replacement wire.

3. General Guidelines

  • Refer to the Velleman® Service and Quality Warranty on www.velleman.eu.
  • Keep this device away from dust and extreme temperatures.
  • Protect this device from shocks and abuse. Avoid brute force when operating the device.
  • Familiarise yourself with the functions of the device before actually using it.
  • All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
  • Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, crash, etc. Using the device in an unauthorized way will void the warranty.
  • Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
  • Due to constant product improvements, the actual product appearance might differ from the shown images.
  • Product images are for illustrative purposes only.
  • Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
  • The appliance is only to be used with the power supply unit provided with the appliance.
  • Keep this manual for future reference.

4. Overview

  1.  tip-handle connection
  2. on-off switch
  3. power adapter
  4. cutting accessories
  5. stand
  6. hot wire tip

5. Operation

  • The appliance is only to be used with the power supply unit provided with the appliance.
  • Draw the design on the piece of foam, either freehandedly or using a pattern.
  • Choose one of the included tips and insert it into the handle. Ensure it is well-secured into the handle.
  • Connect the plug coming from the handle to the adapter. Insert the adapter into the mains socket.
  • Switch on the foam cutter and place it onto the stand. Wait for the cutter to warm up.
  • Hold the cutter in a comfortable position. Always try on a test object before starting on your project. Remove large unwanted chunks first for easier handling.
  • We recommend using the wire tip for more detailed work. Do not use force to cut the foam and let the heat do the work.
  • After cutting, switch off and disconnect the foam cutter from the mains. Let it cool down on the stand before storing.

6. Cleaning and Maintenance

  • Cleaning and user maintenance shall not be made by children without supervision.
  • The external flexible cable of the adapter cannot be replaced, if the cord of this adapter is damaged, it is necessary to dispose of the adapter and replace by an adapter of the same model (model HS18-0501500EU).
  • The foam cutter does not need any particular maintenance. However, occasionally wipe it with a damp cloth to keep it looking new.
  • Do not use harsh chemicals, cleaning solvents or strong detergents.

7. Specifications

adapterinput———————————  100-240 V~, 50/60 Hzoutput———————————5 VDC, 1500 mApre-heat timehot wire tip————————— 30 shot knife tip—————————60 sengraver tip————————— 120 spower——————————— 8W

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICEThe copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

References

[xyz-ips snippet=”download-snippet”]


Posted

in

by

Tags: