VFORCE GRILL 2.0 Mask Instruction Manual

Table of Contents

Use and Care Instructions forPaintball Vision SystemOne size fits mostThis product meets ASTM standards F 1776Instruction Manual

With your VFORCE™ GRILL 2.0™ mask, you have the latest in goggle technology and the best quality and comfort available.

This Mask protects from both 50cal and 68cal paintballs and includes a standard Dual-Pane Thermal Lens.This Paintball Mask provides basic head coverage. Head Protection is further increased with included visor accessory.VFORCE™ GRILL 2.0™ has a number of unique features, such as:

Quick-Change™ ClickDry™ Foam – Swap to a clean, dry, comfortable foam set in a snap!
Low Profile, Lightweight Design – Sunglass-inspired sleekness in a hard-to-hit low profile shape…
QuickChange™ ThermoCured™ AntiFog Lens – The standard of the industry for clear, fog-free vision.
Optional Lenses – The world-famous Quick-Change™ lens lets you swap the lens in a wink to clean or replace it with a tinted lens for different light conditions.

GOGGLES ARE FOR PAINTBALL ACTIVITIES ONLY AND NOT FOR INDUSTRIAL USE.

Every VFORCE™ mask has been handcrafted from the ﬁnest materials modern technology can provide. We test and reﬁne everything we make to ensure you get reliable performance from a quality product.

Meets or exceeds International Standards for:

CCQS Certification Services Ltd. NB 2834Block 1, Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin, D15 AKK1, Ireland

WARNINGRead and follow carefully the instructions and warnings contained in this manual. Failure to observe all instructions and warnings could lead to severe or permanent injuries. Remember that your mask cannot offer protection in all situations.

ALWAYS wear your mask when you are within or near an area in which paintball markers are being used or when using or handling a paintball marker.
NEVER remove or lift your mask in the playing area, even if the lens fogs or gets dirty. If your mask accidentally comes off, throw yourself on the ground and protect your eyes. Tell the players to stop shooting and ask the referees or one of the other players to help you leave the area with your eyes covered.
Make sure the lens and the lens retention clips are firmly in place before wearing the mask.
Before the beginning of the game, all paintball markers must be chronograph had to ensure that the speed of the paintballs does not exceed 300 f.p.s. (91 m/s). Higher speeds could exceed the resistance limits of your mask and lead to serious or permanent injury. Do not play if the speed of the paintballs exceeds 300 f.p.s., or if speed is not verified.
Always follow all safety rules regarding the game and the handling of paintball markers.
In rare cases, any mask may cause irritation and should not be worn by persons who are subject to dermatitis. Discontinue the use of the mask immediately in case of irritation and consult your physician.
Always wear your mask with a visor and chin strap securely attached as per instructions.

DIAGRAM NUMBER	PART DISCRIPTION	SKU
1	HEADSTRAMP ASSEMBLY	2,3438
2	SKIRT SKIRT W/ NAM PLATES	23439
3	FRAME	23440
4	BUTTON LOCK PIN	23443
5	-LENS LOCK RH	23442
6	LENS LOCK LH	23441
7	CHINSTRAP ASSEMbLY	N/A
8	son EAR SET (UR) – BLK`GRY + RIVETS	23422
9	REPLACEMENT FOAM SET TOPsoncau	23422
10	LENS – DERMAL CLEAR	23361
11	VISOR	23444

PROPER MASK FIT

Check that the strap is inserted properly in the slots provided in the mask and that it fits snugly around your head. Ensure that the foam around the lens sits closely around your eyes.The mask’s chin strap should be fastened and secured at all times during play. Simply adjust the chin strap so it rests comfortably against your chin, then fasten the strap buckles.

WARNINGBefore each game, breathe on the inside surface of the lens. If it fogs up before you use your mask: replace the lens or treat it with VForce anti-fog solution.

WARNINGNo paintball mask can prevent fogging under all conditions. If your lens fogs up NEVER remove your mask in the playing area!

V-Force is a brand of Kore Outdoor US inc.PATENT(S): See www.paintballsolutions.com/patents © 2020 Kore Outdoor US inc. All rights reserved. This Kore Outdoor US inc. product is protected by one or more United States patents. Kore Outdoor US inc. Trademarks, Designs and Copyrights are protected by one or more United States patents and International Law. For more information contact Kore Outdoor US inc. at [email protected] www.paintballsolutions.com

MASK AND LENS CARE

Your VFORCE™ mask comes with a polycarbonate Dual Pane Thermal lens treated with scratch-resistant coating. More information on the lens is provided in the next section of this manual.

CLEANING

Clean your lens within two hours of any contact with paintball fills or residues. Remove the lens from the mask to ensure that all surfaces of the lens and the mask are thoroughly cleaned with clean water.
Use only clean warm water to clean the lens. DO NOT USE any other products or cleaners, as they could contain substances that may damage or weaken the lens, or reduce the Anti-Fog effect. Change the lens if it has come in contact with chemical products or fumes.
To dry the lens, simply air dry, or use a clean soft cloth or micro-fiber on the outside of the lens. DO NOT RUB THE INSIDE OF THE LENS. DO NOT USE substances that could scratch or dull the lens, like newspaper, paper towels or clothing. It is normal for the anti-fog coating on the inside surface to go through a tacky phase while drying. To dry this surface, blot with a soft clean cloth and let it dry. Do not rub the inside, as it will streak, and you will have to begin again.

ANTI-FOG TREATMENT

Despite the longest-lasting ThermoCured™ Anti-Fog process available, over time the unit-fog process available, over time the anti-fog treatment may lose its effectiveness. When this happens, only use the VForce™ Anti-Fog solution. Do not use any other products, since it could weaken or damage the lens.

STORAGE

Ensure that your VForce™ mask is clean before storing it. Protect the lens against impacts and scratches. Store your mask in a cool, clean and dry place, far from chemical products or fumes and protected from high temperatures.

LENS INFORMATION

VFORCE™ offers 4 lens types with varied transmissions to provide optimum vision in lighting conditions.

CLEAR Dual Pane Thermal Lens for everyday use.
SMOKE Dual Pane Thermal Lens for bright days.
YELLOW Dual Pane Thermal Lens for cloudy days or deep woods.
HDR Dual Pane Thermal Lens for harsh sunlight and overcast conditions.

LENS REMOVAL

WARNINGCheck the lens before and after each use. Replace the lens after one year of use, even if it seems to be intact. Replace the lens immediately if it shows cracks or if it has received a direct impact from a ball shot from a distance of less than 10 feet (3 m).


1. Unclip the Strap by pressing on both sides of the Clip.	2. Lift the Lock Clip free of the Frame.

3. Press the tabs on the sides of the Lens to remove them from the Frame.	4. Push the Lens out of the Frame.

LENS INSTALLATION

WARNINGUse only VFORCE™ approved lenses that have been designed for your mask.


1. Insert the Lens and secure each tab of the Lens into the Frame.	2. Place the Lock Clips back into the Mask under the Lens tabs, marked L for left, R for right.

3. Push the Strap Clip through the loop in the Soft Ear and securely into the Lock Clip.

WARNINGEnsure that the lens is firmly in place before wearing the mask. Do not make any modifications to your mask. Use only accessories that have been approved for your VFORCE™ mask. Depending on the shape of your head, it may be necessary to wear additional ear and face protection. The retention strap is not an ear protector.

FOAM REMOVAL


1. The Upper and Lower Foam Holders are attached to the Frame using a post-and-hole system.	2. Grip the Upper Foam Holder and pull it away from the Frame and then repeat with the Lower Foam Holder.

FOAM INSTALLATION


1. Match the shape of the Lower Foam Holder to the lower section of the Frame and align the posts with the holes.	2. Completely press each post into the corresponding hole and then repeat with the Upper Foam Holder