Victrola 8-in-1 Turnable Bluetooth Record Player [VTA-754B] Instruction Manual

Instruction Manual

MODEL: VTA-754B8-IN-1 TURNTABLE

CAUTION: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.WARNING: To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacleor other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING: Invisible laser radiation when open and interlock failed or defeated. Avoid directexposure to laser beam.

Important Safety Instructions

  1. Read these instructions – All the safety and operating instructions should be read before this productis operated.
  2. Keep these instructions –The safety and operating instructions should be retained for future reference.
  3. Heed all warnings – All warnings on the appliance and in the operating instructions should beadhered to.
  4. Follow all instructions – All operating and use instructions should be followed.
  5. Do not use this apparatus near water – The appliance should not be used near water or moisture –for example, in a wet basement or near a swimming pool, and the like.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.
  9.  Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two bladeswith one wider than the other. A grounding plug has two blades and a third grounding prong. The wideblade or the third prong is provided for your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at the plugs, conveniencereceptacles, and at the point where they exit from the apparatus.
  11.  Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart or rack is used,use caution when moving the cart/apparatus combination to avoidinjury from tip-over.
  13. Unplug the apparatus during lighting storms or when unused forlong periods of time.
  14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has beendamaged in any way, such as power supply cord or plug is damaged, liquid has been spilledor objects have fallen into the apparatus has been exposed to rain or moisture, does notoperate normally, or has been dropped.

 

 

 

-This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to thepresence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficientmagnitude to constitute a risk of electric shock.-Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are nouser-serviceable parts inside. Refer servicing to qualified personnel.-The exclamation point within and equilateral triangle is intended to alert the user to the presence ofimportant operating and maintenance instructions in the literature accompanying the appliance. 16.  The mains plug is used as disconnect device, the disconnect device shall remain readily operable. 17.   WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Theapparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such asvases, shall not be placed on apparatus. 18.  The use of the equipment in moderate climate. 19.  The ventilation should not be impeded by covering the ventilation openings with items such asnewspapers, tablecloths, curtains, etc. 20.  No naked flame sources, such as lighted candles, should be placed on the apparatus. 21. The symbol with Indication AC voltage.22.  CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce therisk of electric shock, do not perform any servicing other than that contained in the operatinginstructions unless you are qualified to do so.

 23 This equipment is a Class Ⅱ or double insulated electrical appliance. It has been designedin such a way that it does not require a safety connection to electrical earth.

 24.  The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such assunshine, fire or the like.25.  Attention should be drawn to the environmental aspects of battery disposal.

ACCESSORIES INCLUDED

  • REMOTE CONTROL
  • INSTRUCTION MANUAL
  • WARRANTY (BACK OF MANUAL)
  • 45 RPM ADAPTER
  • CD SOFTWARE
  • USB CABLE
  •  3 REPLACEMENT NEEDLES
  • 1 VINYL CLEANING CLOTH
  • 10 RECORD SLEEVES
  • RCA LINE OUT CABLE

Product Overview

Front View

  1. REPEAT: In CD or USB mode, press toselect a repeat mode.
  2. SHUFFLE: In CD or USB mode, pressfor shuffle playback.
  3. PROGRAM: In CD or USB mode, whilethe CD or USB is stopped, press toprogram tracks.
  4. &5. FOLDER + & FOLDER- : In USBmode, press to choose yourdesired folder.
  5. VOLUME KNOB: Turn to adjustvolume. (Note: volume ranges from00 to 30.)
  6. DISPLAY
  7. POWER: Push to turn the unit on or off.
  8. 3.5mm HEADPHONE JACK: Acceptsheadphone/earphone plugs
  9.  BT/USB: Press to switch to Bluetoothor USB mode.
  10. PHONO: Press to enter to Phonomode.
  11. CD/AUX: Press to switch to CDor AUX mode.
  12. TAPE: Press to enter to cassettetape mode.
  13. FM: Press to enter to FM mode.
  14. TUNING: In FM mode, turn to tunein station.
  15. USB JACK
  16. AUX-IN JACK: Connect an externalsource to the AUX IN socket.
  17. STOP : Press to stop playback.
  18. &20. PREVIOUS / NEXT TRACK &REWIND / FF :In CD or USB Mode, press once to skip tothe previous / next track.Press and hold to fast rewind / forward.
  19. PLAY/PAUSE : Press to startplayback. During playback, press again topause.
  20. OPEN/CLOSE : In CD mode, use toopen and close the disc tray.
  21. DISC TRAY
  22. REMOTE SENSOR
  23. FM SCALE
  24. TUNED/ST INDICATOR: In FM Mode,the “TUNED/ST” indicator lights up redwhen tuning in a stereo reception station.

Right Side View

27. CASSETTE FF & EJECT: Press halfway to fast forward, press all the way to endand eject the tape.

Rear View

 28.  FM WIRE ANTENNAWhile tuned to a station in FM mode, extend the wire and reposition to adjustfor best reception. 29.  AC POWER CORDPlugs into a wall outlet.30  USB JACK (Recording Only)31. LINE OUT JACKSFor amplifier device with RCA auxiliary input sockets, insert the white and red plugs on theRCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connectthe white plug to the white jack and the red plug to the red jack.

Parts of the Turntable

A. Turntable.B. Safety Screw (for transport) Before using the unit, turnthe screw clockwise using a coin or screwdriver.Important: When you transport the unit, turn the screw counterclockwise to secure the turntable.C. Cue-lever Use this lever to lift the tone arm.D. Speed SelectorE. Tone Arm HolderF. Tone Arm Before use, completely loosen the fixed rope on the tone arm and lift the tonearm up.G. 45 RPM Adaptor

Setup

  1. Remove white protective needle cover by gently pulling towards front of unit.
  2. Remove any packaging materials from the unit.
  3. Connect the AC power cordto a wall outlet.

Note: To prevent interference, avoid bundling audio signal cables together with the AC power cord.

Basic Operation

  1. Push the POWER button to turn the unit on.
  2. Select the source by pressing the corresponding button(USB / BT / PHONO / CD / AUX / TAPE / FM).
  3.  Rotate the VOLUME knob to adjust to the desired sound level.

Listening through Earbuds/Headphones (not included)For private listening, first reduce the volume level to minimum.Insert your headphones’ plug into the 3.5mm jack, thenadjust the volume up by turning the VOLUME knob.

Note: The speakers will automatically be deactivated whileheadphones are plugged in.

Listening through RCA LINE OUTFor amplifier device listening, first reduce the volume level to minimum. Insert the white and redplugs on the RCA cable into the back of the unit, then insert the opposite end into your amplifierdevice. Be sure to connect the white plug into the white jack and the red plug into the red jack.CONDENSATION WARNING:When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is thedanger that water vapor in the air may condense on the unit, preventing proper operation. In such cases, leave theunit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings.

Remote Control

When using the remote control, point it towards the remote sensor on the front panel of the unit.Notes:– Even if the remote control is operated within the effective range, remote control operation may beimpossible if there are any obstacles between the unit and the remote control.– If the remote control unit is operated near other devices, which generate infrared rays, it may notfunction properly. Conversely, the other devices may not function incorrectly.

Battery Installation

  1. Remove the battery compartment cover.
  2. Insert 2x “AAA” batteries.Note: Make sure that they are oriented so their polaritymarkings, “+” and “-”, match the remote’s markings.
  3. Replace the battery compartment cover.

Battery ReplacementWhen the operating distance between the remote control unit and main unit decreases, it isnecessary to replace the battery with new ones.

Battery PrecautionsBe sure to insert the batteries with correct positive “+” and negative “-” orientation.ALWAYS use batteries of the same type. Never mix different types of batteries together.When using rechargeable batteries, refer to the precautions on their labels.When the remote control unit is not to be used for a long time (more than a month), remove thebatteries to prevent them from leaking.Do not heat or disassemble batteries, and NEVER dispose of old batteries by throwing them in a fire.Do not dispose device into standard garbage disposal sites. Dispose of device at available BatteryRecycling Sites after fully discharging battery. Not doing so may violate disposal laws andregulations.Please refer to local regulations for proper battery disposal.

Remote Control Button Functions

  1. OPEN/CLOSE: Press to open/close the disc tray.(Note: This button will only work in CD mode)
  2. PHONO: Press to enter PHONO mode.
  3.  FM: Press to enter FM mode.
  4. Bluetooth: Press to enter Bluetooth mode.
  5.  TAPE: Press to enter Cassette mode.
  6. &15. FOLDER+ / FOLDER- : In USB mode, press to chooseyour desired folder.
  7. PROGRAM: In CD or USB mode, while CD or USB isstopped, press to program tracks.
  8. REPEAT: In CD or USB mode, press to select repeat playback.
  9. STOP : Press to stop playback.
  10. 10&20. VOL+ / VOL- : Press to adjust the volume.
  11. &18. Previous / Next Track & Fast Rewind / Forward :
  12. CD or USB Mode, press once to skip to the previous / next track.Press and hold to fast rewind / forward.
  13.  CD: Press to enter CD mode.
  14.  AUX: Press to enter AUX mode.
  15. USB: Press to enter USB mode.
  16. SHUFFLE: In CD or USB mode, press for shuffle playback.
  17.  PAIR: In Bluetooth mode, press shortly to disconnect current device.Press again to reconnect the device that has been connected before.
  18.  PLAY/PAUSE : Press to start playback, press again to pause.

Listening to a Vinyl Record

  1. Press the “PHONO” button, “PHONO” will appearon the display.
  2. Gently open the top cover. Note: Be careful not to pinch your finger whenopening /closing the top cover.
  3.  Place a vinyl record on the turntable. When playing a45 RPM record, use the included adaptor.
  4. Select the appropriate speed (4).
  5. Gently push tone arm clip (5)to the right to release the tone arm.
  6.  Raise the cue lever (6) to lift the tone arm off the tone arm support.
  7. Move the tone arm gently to the edge of the record (or the starting point of a track).The turntable will begin to turn.
  8.  Gently lower the tone arm by slowly releasing the cue lever.
  9.  When the record reaches to its end, tone arm and rotation stop. Lift the tone arm and placeit to tone arm rest manually.Important:– Closing the top cover will help prevent dust from settling on the turntable.– Always relock the tone arm clip before transporting the unit.– Do not place anything on top of the turntable cover, especially while playing a record.

Listening to a CD

1. Press the CD/AUX button to switch to CD mode.Note: When no disc is set, “NO DISC” will appear on the display.2. Press the OPEN/CLOSE button.Note: This button will only work in CD mode.3. Place a disc on the tray with the printed label face up.4. Press the OPEN/CLOSE button to close the tray.Note: “READ” will blink for a few seconds.5. The number of tracks will show on the display. And then it will begin playback fromthe first track automatically.6. To temporarily pause playback, press the PLAY/PAUSE button Press again to resume.7. To skip tracks backward or forward, press the corresponding skip button .Pressing once will restart the current track.Pressing twice in succession will return to the beginning of the previous track.8. To fast rewind / forward within a track, press and hold down the corresponding skip buttonor until the desired position is reached.9. To stop playback, press the STOP button.

Important:– Never place more than one disc on the tray.– The disc must be placed in the center of the disc tray. An incorrectly loaded disc

can permanently damage the tray door mechanism.– Do not push the CD tray – always use the OPEN/CLOSE button.– It takes a moment for the unit to load a disc, during which all buttons will betemporarily deactivated.

Repeat PlaybackEach time the REPEAT button is pressed, the repeat mode will cycle through the following options:

REPEAT 1 (Repeat one track)The current track will be played repeatedly. If you press the button to select another track, the track you select will be played repeatedly.REPEAT ALL (Repeat the entire CD)The entire CD will be played repeatedly.To cancel the repeat mode, press REPEAT button repeatedly till the“REPEAT” icon disappears from the display.

Notes:– If one of the following buttons is pressed, the repeat mode will be cancelled:OPEN/CLOSE, FM, PHONO, CD/AUX, /USB, TAPE.– Repeat playback works with finalized discs only.

Shuffle PlaybackTo play the tracks on a CD in a random sequence, press the SHUFFLE button during playback,“SHUFFLE” will show on the top of the display. Press SHUFFLE again to cancel shuffle mode.

Notes:– Pressing during shuffle playback will randomlyselect the next track.– If one of the following buttons is pressed, shuffle mode will becancelled: OPEN/CLOSE, FM, PHONO, CD/AUX, /USB, TAPE.– When the SHUFFLE playback of all the tracks has beenfinished, the unit stops and the shuffle mode is cancelled.– A track cannot be repeated during shuffle playback.– Shuffle playback does not work during programmed playback.– Shuffle playback works with finalized discs only.

Programmed PlaybackUp to 20 tracks can be programmed to play in the desired order.Notes:– Shuffle playback does not work during programmed playback.– Programmed playback works with finalized discs only.

  1.  Press “CD” to enter CD mode, then load a CD.
  2. While the CD is stopped, press the PROGRAM button.
  3. “PROGRAM” indicator blinks, and “P-01” appears on the display.
  4.  Press to select a track number.
  5.  Press the PROGRAM button again to set the current track.
  6.  “P-02” is displayed. Repeat steps 4 through 5 to program the additional tracks.
  7.  When the selection of track numbers has been finished, press the PLAY button( )to startprogram playback.
  8. To cancel the program mode, press the STOP ( ) button twice and then the “PROGRAM” willdisappear from the display.

To check the programmed orderIn the stop mode, press repeatedly to show the track numbers that havebeen programmed.

Listening to the Radio

  1. Press the “FM” button. “RAD” will show on the display.
  2. Tune to the desired station, using the Radio Tuner Knob.

Listening to an External Audio Device (AUX Mode)

Press the CD/AUX button to switch to AUX mode. “AUX” will show on the display.In AUX (auxiliary) mode, this unit can play audio from an external device (iPod, MP3 Player, PortableCD Player, etc.)There is an AUX-IN jack on the front of the unit. When connecting a device that has a headphonejack, use a 3.5mm cable on both ends to connect the external device with the apparatus.

  1. Plug one end of the 3.5mm cable (not included) into the AUX-IN jack.
  2. Plug the other end of the cable into the headphone jack of the external device.

NOTE: All operations are only available on your external device.

Listening to an External Audio Device (BT Mode)

  1.  Press /USB button to switch to Bluetooth mode, and the display will flash “bLUE”.
  2. On your external device turn ON the Bluetooth function.NOTE: The effective distance between your external device and this apparatus is10 meters (33ft).
  3. Wait a moment for “Wooden Music Center” to appear on the devices list of your externaldevice’s Bluetooth Menu. Press “Wooden Music Center” to connect to the unit. Sometimes awindow will ask you for a password. Fill in “0000” then press “OK” on your external device.
  4.  When the Bluetooth connection is successful, the “bLUE” on the display and the Bluetoothsymbol will stop flashing.

NOTE:– The PAIR Button will allow you to disconnect from your external device while remaining in BTmode. Simply press the PAIR button to disconnect. Press it again to reconnect the device that hasbeen connected before.

Listening to a Cassette Tape

  1. Load an audio cassette tape into the unit (located on theright side of the unit). Playback will automatically begin.
  2. Press button halfway to Fast Forward the tape.Press button lightly and playback will resume.
  3. Press button completely down to end playback and eject tape.

USB Memory Stick Playback

  1. Press /USB button to switch to USB function. “USB” will appear on the display.Note: When no USB is inserted, “NO” will appear on the display.
  2.  Insert the USB memory stick (not included) into the USB port and then it will begin playbackautomatically from the first track.
  3.  To pause playback, press the PLAY/PAUSE button . Press again to resume.
  4. To skip tracks backward or forward, press the corresponding skip button .
  5.  To fast rewind / forward within a track, press and hold down the corresponding skip buttonuntil the desired position is reached.
  6. Press the button FOLDER+ or FOLDER- to select your desired folder.
  7. To stop playback, press the STOP ( ) button.

Repeat PlaybackEach time the REPEAT button is pressed, the repeat mode will cycle through the following options:

REPEAT 1 (Repeat one track)The “REPEAT 1” icon will appear on the display and the current track willbe played repeatedly. If you press the button to selectanother track, the track you select will be played repeatedly.

REPEAT ALL (Repeat the entire USB)The “REPEAT ALL” icon will show on the display and the entire USB will start to play repeatedly.To cancel the repeat mode, press REPEAT button repeatedly until the “REPEAT” icon disappearsfrom the display.

Shuffle Playback

Press the SHUFFLE button for shuffle playback. The “SHUFFLE”icon will appear on the display. Playing the tracks on a USB mode ina random sequence.Press it again to cancel the SHUFFLE playback, “SHUFFLE” willdisappear from the display.

Notes:– Pressing   during shuffle playback will randomly select the next track.

– A track cannot be repeated during shuffle playback.– Shuffle playback doesn’t work during programmed playback.Programmed PlaybackYou can program up to 98 tracks for the USB.Notes:– Shuffle playback does not work during programmed playback.

  1. Rotate to select USB function, then insert a USB memory stick into USB port.
  2. While the USB is stopped, press the PROGRAM button.
  3. “PROGRAM” icon will show and “P01” blinks on the display.
  4.  Press to select a track number.
  5.  Press the PROGRAM button again to set the next program track, “P02” appears and blinks.Repeat steps 4 through 5 to program the additional tracks.
  6. When the selection of track numbers has been finished, press the PLAY/PAUSEbutton to start program playback.(Note: when all 98 program tracks are finalized, press the PROGRAM buttononce and “FI” will appear on the display)
  7.  Press the STOP ( ) button to cancel the program mode and thenthe “PROGRAM” will disappear from the display.To check the programmed orderIn the stop mode, press repeatedly to show the track numbersthat have been programmed.

USB Recording Operation

To properly record your vinyl to MP3 via computer, use the included USB Output Cable andInstructional CD Software. Connect one end of the USB cable to the turntable (USB jack on the backof the unit) and the other end into your computer. Then connect the AC power cord to the turntable.To install and use the software on your computer, select the proper Mac or PC install files, thenfollow the prompts provided on the Instructional CD.For the most up to date manuals, software, instructional details, troubleshooting or otherdownloadable content, please go to http://audacityteam.org

Maintenance / Proper Handling

Compact Disc Handling

  • Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recordedonly on one side)
  • To remove a disc from its storage case, press down on the center of the case and lift the discupward, holding it carefully by its edges.
  • To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
  • Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they willirreparably damage the disc’s plastic surface.
  • Discs should be returned to their cases after use to protect from dust and scratches.
  •  Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of time.
  •  Printable CD-R and CD-RW discs are not recommended, as the label side may become sticky anddamage the unit.
  • Use a soft oil-based felt-tipped pen to write information on the label side. Never use a ball-point or hard-tippedpen, as doing so may damage the recorded side.
  • Do not use irregularly-shaped CDs (octagonal, heart shaped, business card size, etc), as they willdamage the unit.
  •  Read all precautions supplied with any CD-R or CD-RW disc.
  • Never handle a disc with dirty fingers.
  • Never insert a disc that has a crack on the surface.

Handling Vinyl Records

  • Do not touch the record’s grooves. Only handle records by the edges or the label with clean hands. Touchingthe record surface will cause your record’s quality to deteriorate.
  • To clean a record, use a soft anti-static cloth to gently wipe the record surface.
  • Keep records in their protective sleeves when not in use.
  • Always store records upright on their edges
  • Avoid placing records in direct sunlight, close to a heat source (radiators, stoves, etc.), or in a location subjectto vibration, excessive dust, heat, cold or moisture.

General Care

  • When removing the power plug from the wall outlet, always pull directly on the plug.Never pull the cord.
  • To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
  • Do not attempt to clean the unit with chemical solvents as this might damage the finish.
  • For cleaning, only use a clean, dry cloth.
  • In order to shut off the power to this product completely, unplug the power cord from the wall outlet. Be sure tounplug the unit if you do not intend to use it for an extended period of time.

How to Replace the Turntable Stylus (Replacement Needle # ITNP-LC1)The stylus should last about 50 hours under normal use. However, it is recommended that the stylusbe replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylusmay damage the record. The highest speed of 78 RPM records would wear out the stylusmore quickly.Removing the old stylus:

  1. Set a screwdriver at the tip of the stylus and push downward (A).
  2. Remove the stylus by pulling it simultaneously downwardand forward.

Installing a new stylus:

  1. Hold the front tip of the stylus and insert its rear edge (B) first.
  2. Push the stylus upwards (C) until the tip locks into place.

Caution:

  • Do not bend the stylus.
  • Do not touch the needle to avoid injury to your hand.
  • Turn off the unit’s power before you replace the stylus.
  • Keep out of reach of children.

Troubleshooting Guide

For further assistance with your product, call Victrola atTOLL FREE# 1-877-ITECH-97 (1-877-483-2497).Please note: As a result of continual improvements, the design and specifications of this product aresubject to change without notice.Bluetooth is a registered trademark of Bluetooth SIG, Inc.Other trademarks and trade names are those of their respective owners.Made in China.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates usesand can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one of the followingmeasures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.WARNING: Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this equipment.The device must not be co-located or operating in conjunction with any other antenna or transmitter.To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cmfrom nearby persons.

IC Statement

This device complies with RSS247 of Industry Canada. Cet appareil se conforme à RSS247 deCanada d’Industrie. This device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesiredoperation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicablesaux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:(1) le dispositif ne doit pas produire de brouillage prejudiciable, et (2) ce dispositif doit accepter toutbrouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indesirable.The device must not be co-located or operating in conjunction with any other antenna or transmitter.L’appareil ne doit pas être localisé ou fonctionner avec d’autres antennes ou transmetteurs.This device complies with IC radiation exposure limits set forth for an uncontrolled environment.Cet appareil est conforme aux limites d’exposition aux rayonnements de la IC établies pour unincontrôlé environnement.The device should be installed and operated with a minimum distance of 20cm between the radiatorand your body.L’appareil doit être installé et utilisé avec une distance minimale de 20cm entre le radiateu etvotre corps.

California PROP 65 Warning

WARNING: This product can expose you to chemicals including lead, which is known to theState of California to cause cancer and birth defects or other reproductive harm.For more information go to www.P65Warnings.ca.gov.

Victrola is a registered trademark of Innovative Technology Electronics LLC.Innovative Technology Electronics LLC.Limited Warranty: 90 Days Labor, One Year PartsInnovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” inmaterials under normal use for a period of “One Year” from the date of the original purchase. TheWarranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace theproduct if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the costto repair or replace damaged “Parts” only for a total period of “One Year” from the date of the originalpurchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands,ear-pads, or damage due to line power surges, connection to improper voltage supply or settings,misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.To obtain service, the purchaser MUST present an original sales receipt / proof of purchase.Please contact us at www.victrola.com to request an RMA (Return Material Authorization)number to return products for service or replacement. Returns without an RMA number on thepackage will be refused and returned to sender. Upon receipt of the returning item and our fullinspection (IT) may issue a replacement to customer for the same item or of one that has equivalentvalue and features. To return an item, supply full name, return address, phone number, itempurchased, receipt of purchase and reason for return to obtain RMA number. All returns must be inthe original packaging or reasonable substitute to prevent damage. Customer “Must” include fullname, shipping address and telephone number inside of package. No return will be shipped back toa PO Box or APO address. Please include your check or money order in the amount of• USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)• USD$10.00 for items $40.00 to $99.99 (Price Paid Per Unit)• USD $16.00 for items $100.00 and up (Price Paid Per Unit)• Shipping fees are non-refundableto be payable to Innovative Technology Electronics LLC. (for handling and return shipping charges)(IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure toprovide any / all of the necessary information. Send all inquiries or RMA request via our websitewww.victrola.com/pages/technical-support.Innovative Technology Electronics LLC.1 Channel DrivePort Washington, NY 11050Toll free: 1-877-483-2497Website for support: www.victrola.com/pages/technical-supportThere are no express warranties except as listed above.REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVEREMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL ORCONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THISPRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.Some states do not allow the exclusion or limitation of incidental or consequential damages, orlimitations on how long an implied warranty lasts, so the above exclusions or limitations may notapply to you. This warranty gives you specific legal rights and you may also have other rights, whichvary from state to state.

 

Read More About This Manual & Download PDF:

 

Victrola 8-in-1 Turnable Bluetooth Record Player [VTA-754B] Instruction Manual –

Victrola 8-in-1 Turnable Bluetooth Record Player [VTA-754B] Instruction Manual –

Posted

in

by

admin

Tags:

, ,