victron energy BlueSolar PWM-Pro Charge Controllers User Guide
BlueSolar PWM-Pro 10A
BlueSolar Pro Remote Panel
Programmable
The BlueSolar PWM-Pro series is ready for use with its default settings.It also is fully programmable:
- With help of a computer and software (available free of charge from our website)
- With the dedicated BlueSolar Pro Remote Panel (see features below).
Features
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar array and/or battery.
Day/night timing options
See Remote Panel manual for details
| BlueSolar PWM-Pro |
12/24-5 |
12/24-10 |
12/24-20 |
12/24-30 |
| Battery Voltage |
12/24V with automatic system voltage detection |
|||
| Rated charge current |
5A |
10A |
20A |
30A |
| Automatic load disconnect |
YesC |
|||
| Maximum solar voltage |
28V / 55V (1) |
|||
| Self-consumption |
< 10mA |
|||
| Load output |
Manual control + low voltage disconnect |
|||
| Protection |
Battery reverse polarity (fuse) Output short circuit Over temperature |
|||
| Battery temperature sensor |
Optional (article SCC940100100) |
|||
| Temperature compensation |
-30 mV / °C resp. -60 mV / °C (if temperature sensor installed) |
|||
| Remote panel |
Optional (article SCC900300000) |
|||
| Grounding |
Common positive |
|||
| Operating temp. range |
-20 to +50°C |
|||
| Humidity (non-condensing) |
Max 98% |
|||
| DEFAULT SETTINGS | ||||
| Absorption charge (2) |
14.4V / 28,8V |
|||
| Float charge (2) |
13.8V / 27,6V |
|||
| Equalization charge (2) |
14,6V / 29,2V |
|||
| Low voltage load disconnect |
11,1V / 22,2V |
|||
| Low voltage load reconnect |
12,6V / 25,2V |
|||
| ENCLOSURE | ||||
| Terminal size |
4mm² |
4mm² |
10mm² |
10mm² |
| Protection category |
IP30 |
|||
| Weight |
0,13kg |
0,13kg |
0,3kg |
0,5kg |
| Dimensions (h x w x d) |
138x70x37 mm 5.4×2.7×1.4 inch |
138x70x37 mm 5.4×2.7×1.4 inch |
160x82x48 mm 6.3×3.2×1.9 inch |
200x100x57 mm 7.9×4.0×2.3 inch |
| STANDARDS | ||||
| Safety |
IEC 62109-1 |
|||
| Emission |
EN 61000-6-1, EN 61000-6-3, ISO 7637-2 |
|||
|
References
[xyz-ips snippet=”download-snippet”]