VIKING Electronics 25AE-70V 70Volt Paging Horn Instruction Manual
Cost Effective Paging Horn for 70V Paging Systems
The 25AE-70V paging horn provides economical paging coverage for 70 Volt paging systems. In outdoor factory or warehouse environments, 25AE-70V paging horns are the best method of producing understandable sound. In these environments the directional design allows the installer to focus the sound cone down aisles and toward work areas.
The 25AE-70V paging horn provides a built-in step-down transformer for use with 25V or 70V paging systems such as Viking models PA-30, PA-60, PA-250, PA-250-IP and PP-250. The transformer has a range of 5 separate switch selectable power taps, which can be used to adjust the volume of each speaker. These higher voltage distributed audio paging systems also have the advantage of being able to connect more speakers using lighter gauge wire runs while having less volume lost in wire resistance. This saves wiring costs compared to 8 ohm systems.
Features
- 5 inch diameter horn
- 10 watt power handling
- Compatible with 25V or 70V paging systems
- Adjustable base for easy mounting and directional adjustment
- Compact design for discrete mounting
- Five switch selectable power taps
- High efficiency
- Designed to meet IP53 ingress protection rating when mounted with horn pointing downward at least 45 degrees from horizontal
Applications
Add additional speakers and coverage areas to existing paging systems such as Viking models:– PA-30 (DOD 489)– PA-60 (DOD 493)– PA-250 (DOD 500)– PA-250-IP (DOD 501)– PP-250 (DOD 511)
Specifications
Max Power : 10 Watts70V Power Taps: .62W, 1.25W, 2.5W, 5W, 10W25V Power Taps: .08W, .16W, .31 W, .62W, 1.25WViking Taps: .16W, .31W, .62W, 1.25W, 2.5WConnection: 12” 22 awg Pigtail wiresDimensions: 5” (127 mm) DiameterShipping Weight: 1.8 lbs (0.8 kg)Frequency Response: 400 Hz to 7,000 Hz
Installation
The 25AE-70V paging horn is designed to be surface mounted to any rigid surface. For outdoor applications, it is recommended to mount the paging horn underneath an eave, and have the horn pointed downward, to keep water from pooling in the horn.
Wiring
A. 70V Paging System
| Step 1. | Connect the RED (+) and GREEN (-) wires to the 70V output of a paging system. |
| Step 2. | Use the 70V scale on the back of the 25AE-70V Paging Horn to manage power and adjust the volume by turning the selection knob to the .62W, 1.25W, 2.5W, 5W, or 10W setting. |
B. 25V Paging System
| Step 1. | Connect the RED (+) and GREEN (-) wires to the 25V output of a paging system. |
| Step 2. | Use the 25V scale on the back of the 25AE-70V Paging Horn to manage power and adjust the volume by turning the selection knob to the .08W,
.16W, .31W, .62W, or 1.25W setting. |
C. Use with Viking Model PA-30 or PA-60 Amplifiers
Viking models PA-30 (DOD 489) and PA-60 (DOD 493) have the ability to drive 25V and 70V paging speakers. This is achieved by bridging together two differential 8 ohm outputs to get a high voltage output (see DOD 489 and 493 for additional information). The achieved output voltage is actually between the 25V and 70V standards. Because of this, the 25AE-70V paging horn shows a third scaling option for the transformer tap selection knob called “VIKING WATTS” in which there are six settings ranging from .16W to 2.5W. Use this scale to manage power handling and adjust volume of each 25AE-70V paging horn. Best results are achieved if the power sum of all 25AE-70V paging horns used does not excessively exceed the power output of the PA-30 or PA-60 amplifier.
| Step 1. | Connect the RED (+) and GREEN (-) wires to the “70V OUT” screw terminals of the PA-30 or PA-60. |
| Step 2. | Use the “VIKING WATTS” scale on the back of the 25AE-70V Paging Horn to adjust the volume by turning the selection knob to the .16W, .31W, .62W, 1.25W, or 2.5W setting. |
Other Viking Speakers
Cost Effective Speakers for Indoor and Outdoor Use
The 300AE paging horn provides a direct voice coil connection for use with 8 ohm paging systems such as Viking models PA-2A, PA-15, PA-60, HF-3W, DVA-2WA and M2W. Even though its 30 watt rating is greater than some lower power paging amplifiers provide, the 300AE is an excellent choice because it is more efficient than Viking’s smaller 25AE paging horn. In other words, the larger 300AE only needs 1 watt of power to play as loud as 2 watts being driven into the smaller 25AE paging horn.
The 300AE paging horn also provides a built-in step-down transformer for use with 25V or 70V paging systems such as Viking models PA-30, PA-60, PA-250, PP-250 and PA-250-IP. The transformer has a range of power taps that are selectable with a 6 position rotary switch, so that installers are able to independently adjust the volume of each paging horn. Higher voltage paging systems also have the advantage of being able to connect more speakers using lighter gauge wire runs and still have less volume lost in wire resistance. For more information on the 300AE, see DOD 497
| Additional Speakers | 8 Ohm Models | 70V Models |
| Weather Resistant 5 inch Horn | 25AE | 25AE-70V |
| 8” Metal Grill Ceiling Speaker | 30AE | 30AE-70V |
| 8” Metal Grill Ceiling Speaker with Volume Control | 35AE | |
| 8” Modern Looking Ceiling Speaker | 40AE |
For more information on the 8 Ohm Models, see DOD 498.
For more information on the 8 Ohm Models, see DOD 498
Speaker Recommendations
| Ambient Noise Environment | Level | Typical Examples | Ceiling Height | Distance Between Speakers |
| Quiet – Conversations very easily understood. | 50dB | Hotel lobby, hospital area, quiet office | 9 ft
14 ft |
35 ft
50 ft |
| Normal – Conversations easily understood. | 60dB | Bank lobby, department store, auditorium | 9 ft
14 ft |
25 ft
35 ft |
| Noisy – Voice must be raised to be understood. | 70dB* | Assembly line, supermarket, restaurant | 9 ft
14 ft |
15 ft
25 ft |
| Very Noisy – Conversation difficult or impossible. | 80dB* | Punch press, printing plant, garage, yard | Paging Horns | 25 ft to
75 ft |
* Note: An FBI-1A Feedback Eliminator is recommended. For more information, see DOD 465.
Warranty
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT VIKING TECHNICAL SUPPORT AT: 715-386-8666
Our Technical Support Department is available for assistance Monday to Friday 8:00am – 5:00pm central time. So we can give you better service, before you call please:
- Know the model number, the serial number, and what software version you have (see serial label).
- Have the Product Manual in front of
- It is best if you are on site
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
- Customer must contact Viking’s Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a complete description of the problem, with all pertinent information regarding the defect, such as options set, con- ditions, symptoms, methods to duplicate problem, frequency of failure,Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. The original product boxes are not designed for shipping – an over- pack box is required to prevent damage in transit. Static sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid toVIKING ELECTRONICS 1531 INDUSTRIAL STREET HUDSON, WI 54016
- Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO
- RA number on carton: In large printing, write the RA number on the outside of each carton being
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
- Customer must contact Viking’s Technical Support at 715-386-8666 to determine pos- sible causes for the problem. The customer MUST be able to step through recom- mended tests for
- If the Technical Support Product Specialist determines that the equipment is defective based on the customer’s input and troubleshooting, a Return Authorization (RA) num- ber will be issued. This number is valid for fourteen (14) calendar days from the date of issue.
- After obtaining the RA number, return the approved equipment to your distributor. Please reference the RA number on the paperwork being shipped back with the unit(s), and also the outside of the shipping box. The original product boxes are not designed for shipping – an overpack box is required to prevent damage in transit. Once your distributor receives the package, they will replace the product over the counter at no charge. The distributor will then return the product to Viking using the same RA
- The distributor will NOT exchange this product without first obtaining the RA number from If you haven’t followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
TWO YEAR LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking’s Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number.This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments. This warranty does not cover stainless steel surfaces that have not been properly maintained.NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE PRODUCT SOLD HEREUNDER.EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT VIKING’S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED AS SUCH.
Product Support: 715-386-8666
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.
Read More About This Manual & Download PDF:
References
[xyz-ips snippet=”download-snippet”]